Mercaptans properties

At one time thiols were named mercaptans Thus CH3CH2SH was called ethyl mercaptan according to this system This nomenclature was abandoned beginning with the 1965 revision of the lUPAC rules but is still sometimes encountered When one encounters a thiol for the first time especially a low molecular weight thiol its most obvious property is its foul odor Ethanethiol is added to natural gas so that leaks can be detected without special equipment—your nose is so sensitive that it can detect less than one part of ethanethiol m 10 000 000 000 parts of arr The odor of thiols weakens... 

The physical properties of the principal constituents of natural gas are Hsted in Table 5. These gases are odorless, but for safety reasons, natural gas is odorized before distribution to provide a distinct odor to warn users of possible gas leaks in equipment. Sulfur-containing compounds such as organic mercaptans, aUphatic sulfides, and cycHc sulfur compounds are effective odorants at low concentrations and are added to natural gas at levels ranging from 4 to 24mg/m. ... 

Rifamycin S also undergoes conjugate addition reactions to the quinone ring by a variety of nucleophiles including ammonia, primary and secondary amines, mercaptans, carbanions, and enamines giving the C-3 substituted derivatives (38) of rifamycin SV (117,120,121). Many of the derivatives show excellent antibacterial properties (109,118,122,123). The 3-cycHc amino derivatives of rifamycin SV also inhibit the polymerase of RNA tumor vimses (123,124). 

Physical Properties. Trichloromethanesulfenyl chloride [594-42-3] (perchloromethyl mercaptan, a misnomer but used as the common commercial name), CCl SCl, is a strongly acrid, pale yellow Hquid, boiling at 149°C with some decomposition at atmospheric pressure, 68°C at 6.93 kPa (52... 

Table 2. Chemical and Physical Properties of Sulfurized and Sulfurchlorinated Unsaturated Compounds and Mercaptans...

Both antimony tribromide and antimony ttiiodide are prepared by reaction of the elements. Their chemistry is similar to that of SbCl in that they readily hydroly2e, form complex haUde ions, and form a wide variety of adducts with ethers, aldehydes, mercaptans, etc. They are soluble in carbon disulfide, acetone, and chloroform. There has been considerable interest in the compounds antimony bromide sulfide [14794-85-5] antimony iodide sulfide [13868-38-1] ISSb, and antimony iodide selenide [15513-79-8] with respect to their soHd-state properties, ferroelectricity, pyroelectricity, photoconduction, and dielectric polarization. 

Oxidation or "sweetening" is used on gasoline and distillate fractions. A common oxidation process is also a Merox process that uses a solid catalyst bed. Air and a minimum amount of alkaline caustic ("mini-alky" operation) is injected into the hydrocarbon stream. As the hydrocarbon passes through the Merox catalyst bed, sulfur mercaptans are oxidized to disulfide. In the sweetening Merox process, the caustic is not regenerated. The disulfide can remain with the gasoline product, since it does not possess the objectionable odor properties of mercaptans hence, the product has been sweetened. 

Another approach was developed by Scott in the 1970 s (7.8) which utilises the same mechanochemistry used previously by Watson to initiate the Kharacsh-type addition of substituted alkyl mercaptans and disulphides to olefinic double bonds in unsaturated polymers. More recently, this approach was used to react a variety of additives (both antioxidants and modifiers) other than sulphur-containing compounds with saturated hydrocarbon polymers in the melt. In this method, mechanochemically formed alkyl radicals during the processing operation are utilised to produce polymer-bound functions which can either improve the additive performance and/or modify polymer properties (Al-Malaika, S., Quinn, N., and Scott, 6 Al-Malaika, S., Ibrahim, A., and Scott, 6., Aston University, Birmingham, unpublished work). This has provided a potential solution to the problem of loss of antioxidants by volatilisation or extraction since such antioxidants can only be removed by breaking chemical bonds. It can also provide substantial improvement to polymer properties, for example, in composites, under aggresive environments. 

The oil companies supplying the rubber industry claim that there is no effect on ageing properties when sulphur is present in an oil (up to 6% is possible). They claim that the refining removes the active mercaptans and sulphides and the remainder of the sulphur is complexed into polycyclic compounds and there is no evidence that this type of sulphur has any effect on cure. This claim may be true in some circumstances. However, it is known from practical experience that with certain polymers and compounds the claim is incorrect, especially when the high sulphur oils are used as test media. Oils supplied to the same oil specification from oil fields in different parts of the world, and meeting all the requirements of the specification may, because of widely different sulphur levels, have serious effects on high temperature ageing. 

As esters the alkyl halides are hydrolysed by alkalis to alcohols and salts of halogen acids. They are converted by nascent hydrogen into hydrocarbons, by ammonia into amines, by alkoxides into ethers, by alkali hydrogen sulphides into mercaptans, by potassium cyanide into nitriles, and by sodium acetate into acetic esters. (Formulate these reactions.) The alkyl halides are practically insoluble in water but are, on the other hand, miscible with organic solvents. As a consequence of the great affinity of iodine for silver, the alkyl iodides are almost instantaneously decomposed by aqueous-alcoholic silver nitrate solution, and so yield silver iodide and alcohol. The important method of Ziesel for the quantitative determination of alkyl groups combined in the form of ethers, depends on this property (cf. p. 80). 

The difficulty with HLB as an index of physicochemical properties is that it is not a unique value, as the data of Zaslavsky et al. (1) on the haemolytic activity of three alkyl mercaptan polyoxyethylene derivatives clearly show in Table 1. Nevertheless data on promotion of the absorption of drugs by series of nonionic surfactants, when plotted as a function of HLB do show patterns of behaviour which can assist in pin-pointing the necessary lipophilicity required for optimal biological activity. It is evident however, that structural specificity plays a part in interactions of nonionic surfactants with biomembranes as shown in Table 1. It is reasonable to assume that membranes with different lipophilicities will"require" surfactants of different HLB to achieve penetration and fluidization one of the difficulties in discerning this optimal value of HLB resides in the problems of analysis of data in the literature. For example, Hirai et al. (8 ) examined the effect of a large series of alkyl polyoxyethylene ethers (C4,C0, Cj2 and C 2 series) on the absorption of insulin through the nasal mucosa of rats. Some results are shown in Table II. 

The reducing properties of organic compounds of sulfur, such as methyl mercaptan, show up in partial reduction of trigeminal to geminal dihalides [243]. Dimethyl sulfide reduces hydroperoxides to alcohols and ozonides to aldehydes while being converted to dimethyl sulfoxide [244]. 

CV investigations of 6-mercaptopurine and 8-mercaptoquinoline SAMs on pc-Au electrodes have been presented by Madueno et al. [186] and He etal. [187], respectively. Several model electrode reactions involving various redox probes were studied using such modified electrodes. Baunach and Kolb etal. [188] have deposited copper on disordered benzyl mercaptan film on Au(lll) surfaces. They have also studied the behavior of benzyl mercaptan SAM on Au(lll) in H2SO4 solution using CV and STM. Structural and electrical properties of SAMs based on tetrathiafulvalene derivatives on Au(lll) were investigated. These mono-layers were disordered, or at least loosely... 

Properties of typical commercial sulfurized unsaturated compounds and mercaptans are listed in Table 2. 

---