Mechanical properties compounds

Most properties of linear polymers are controlled by two different factors. The chemical constitution of tire monomers detennines tire interaction strengtli between tire chains, tire interactions of tire polymer witli host molecules or witli interfaces. The monomer stmcture also detennines tire possible local confonnations of tire polymer chain. This relationship between the molecular stmcture and any interaction witli surrounding molecules is similar to tliat found for low-molecular-weight compounds. The second important parameter tliat controls polymer properties is tire molecular weight. Contrary to tire situation for low-molecular-weight compounds, it plays a fimdamental role in polymer behaviour. It detennines tire slow-mode dynamics and tire viscosity of polymers in solutions and in tire melt. These properties are of utmost importance in polymer rheology and condition tlieir processability. The mechanical properties, solubility and miscibility of different polymers also depend on tlieir molecular weights. 

In block copolymers [8, 30], long segments of different homopolymers are covalently bonded to each otlier. A large part of syntliesized compounds are di-block copolymers, which consist only of two blocks, one of monomers A and one of monomers B. Tri- and multi-block assemblies of two types of homopolymer segments can be prepared. Systems witli tliree types of blocks are also of interest, since in ternary systems the mechanical properties and tire material functionality may be tuned separately. 

We conclude this chapter and wrap up the last three chapters with a few remarks about the application of the ideas contained herein to polymer technology. Chapters 2-4 have been concerned with various aspects of the mechanical states of polymers. The opinion was expressed in Chap. 1 that if polymers did not possess the mechanical properties they have, this whole class of compounds might be relegated to the category of laboratory curiosities. On the basis of any number of criteria-the number of scientists employed, the number of industries involved, the number of publications released, the number of patents issued—polymer science proves to be very viable indeed. 

Uses. Furfuryl alcohol is widely used as a monomer in manufacturing furfuryl alcohol resins, and as a reactive solvent in a variety of synthetic resins and appHcations. Resins derived from furfuryl alcohol are the most important appHcation for furfuryl alcohol in both utihty and volume. The final cross-linked products display outstanding chemical, thermal, and mechanical properties. They are also heat-stable and remarkably resistant to acids, alkaUes, and solvents. Many commercial resins of various compositions and properties have been prepared by polymerization of furfuryl alcohol and other co-reactants such as furfural, formaldehyde, glyoxal, resorcinol, phenoHc compounds and urea. In 1992, domestic furfuryl alcohol consumption was estimated at 47 million pounds (38). 

Chemical Properties. A combination of excellent chemical and mechanical properties at elevated temperatures result in high performance service in the chemical processing industry. Teflon PEA resins have been exposed to a variety of organic and inorganic compounds commonly encountered in chemical service (26). They are not attacked by inorganic acids, bases, halogens, metal salt solutions, organic acids, and anhydrides. Aromatic and ahphatic hydrocarbons, alcohols, aldehydes, ketones, ethers, amines, esters, chlorinated compounds, and other polymer solvents have Httle effect. However, like other perfluorinated polymers,they react with alkah metals and elemental fluorine. 

Rea.ctivity ofLea.d—Ca.lcium Alloys. Precise control of the calcium content is required to control the grain stmcture, corrosion resistance, and mechanical properties of lead—calcium alloys. Calcium reacts readily with air and other elements such as antimony, arsenic, and sulfur to produce oxides or intermetaUic compounds (see Calciumand calciumalloys). In these reactions, calcium is lost and suspended soHds reduce fluidity and castibiUty. The very thin grids that are required for automotive batteries are difficult to cast from lead—calcium alloys. 

Rubber. The mbber industry consumes finely ground metallic selenium and Selenac (selenium diethyl dithiocarbamate, R. T. Vanderbilt). Both are used with natural mbber and styrene—butadiene mbber (SBR) to increase the rate of vulcanization and improve the aging and mechanical properties of sulfudess and low sulfur stocks. Selenac is also used as an accelerator in butyl mbber and as an activator for other types of accelerators, eg, thiazoles (see Rubber chemicals). Selenium compounds are useflil as antioxidants (qv), uv stabilizers, (qv), bonding agents, carbon black activators, and polymerization additives. Selenac improves the adhesion of polyester fibers to mbber. 

Various polymers, such as polythiourethanes, polythioethers, and polythioacrylates, are used to produce resins which are transparent, colorless and have a high refractive index and good mechanical properties, useful for the production of optical lenses. Higher refractive indices are promoted by sulfur compounds and especially by esters of mercaptocarboxyhc acids and polyols such as pentaerythritol (41) (see Polymers containing sulfur). 

Ease of cure, easy removal of parts from mold surfaces, and wide availabiHty have made polyesters the first choice for many fiber-reinforced composite molders. Sheet mol ding compound, filament winding, hand lay-up, spray up, and pultmsion are all weU adapted to the use of polyesters. Choosing the best polyester resin and processing technique is often a challenge. The polyester must be a type that is weU adapted to the processing method and must have the final mechanical properties requked by the part appHcation. Table 1 Hsts the deskable properties for a number of fiber-reinforced composite fabrication methods. 

Reportedly, OjoCdiaHylbispheaol A is an attractive comonomer for bismaleimides because the corresponding copolymer is tough and temperature resistant (41). Toughness, however, is a function of the BMI—diaHylbisphenol A ratio employed. In one study optimized toughness properties were achieved when BMI and diaHylbisphenol were employed at a close to 2 1 molar ratio (42). In Table 9, the mechanical properties of BMI—bis(3-allyl-4-hydroxyphenyl)-7 -diisopropylbenzene resias are provided, showiag optimized properties for the 60/40 BMI—diaHylbisphenol composition. The 0,(9 diaHylbisphenol A is commercially available under the trademark Matrimide 5292. Another bisaHylphenyl compound is available from SheH Chemical Company/Technochemie under the trademark COMPIMIDE 121. 

Alpha—beta aluminum alloys respond to heat treatment with a general improvement of mechanical properties. Heat treatment is accompHshed by heating to 815—870°C, quenching in water, and reannealing at 370—535°C, depending on the size and section of the casting. Different combinations of strength, hardness, and ductility can be obtained. Some nickel in aluminum bronze is in soHd solution with the matrix and helps refine the precipitate, and a smaller amount is in the K-intermetaUic compound. 

Mechanical Properties. Typical properties of ethylen—acryhc elastomers, like those of other compounded mbbers, vary widely with ... 

Mechanical properties depend considerably on the stmctural characteristics of the EPM/EPDM and the type and amount of fillers in the compound. A wide range of hardnesses can be obtained with EPM/EPDM vulcanisates. The elastic properties are by far superior to those of many other synthetic mbber vulcanizates, particularly of butyl mbber, but they do not reach the level obtained with NR or SBR vulcanizates. The resistance to compression set is surprisingly good, in particular for EPDM with a high ENB content. 

Polynuclear Phenol—Glycidyl Ether-Derived Resins. This is one of the first commercially available polyfunctional products. Its polyfunctionahty permits upgrading of thermal stabiUty, chemical resistance, and electrical and mechanical properties of bisphenol A—epoxy systems. It is used in mol ding compounds and adhesives. 

---