Maleic anhydride, as dienophile

Itoh and coworkers [223] have shown that fullerene derivatives as 6/2-113, which to date have been prepared in a stepwise procedure, can be obtained in a three-component domino process by treatment of diynes 6/2-109, dimethylphenylsilane 6/2-110 and fullerene (C60) in the presence of a Rh-catalyst [223]. Interestingly, using maleic anhydride as dienophile failed to give the desired cycloadduct, whereas Cso -in spite of its strong tendency to form complexes with various transition metals [224] - never suppressed the catalytic silylative cyclization step to give the diene 6/2-112 (Scheme 6/2.24). 

An interesting approach involving the use of a fluorous dienophile as a diene scavenger under microwave conditions has been investigated by Werner and Curran [101]. The classical Diels-Alder-type cydoaddition of diphenylbutadiene with maleic anhydride as dienophile was accelerated under microwave heating, such that it... 

A decision on the molar proportions of reactants was based in part on results obtained with maleic anhydride as dienophile shown in Table 2. The time shown l for complete disappearance of purple or pink color. The bimolecular reactiof... 

Maleic anhydride as dienophile ensures the correct relationship between the two chiral centres. It is better to reduce and protect before the oxidative cleavage so that the distinction between the right and left sides of the molecule... 

Diels-Alder cycloaddition provides one of the most useful methods for the construction of polycyclic aromatic ring systems. With the use of maleic anhydride as dienophile, two additional carbon atoms may be fused to the bay region sites of some polycyclic arylenes to generate additional rings. For example, the first step in the synthesis of benzo[ghi]perylene 6 involves a Diels-Alder cycloaddition between perylene and maleic anhydride (Scheme 3.5) [19]. Aryne intermediates generated in situ also serve as dienophiles for Diels-Alder cycloadditions for example, reaction of 1,5-naphthadiyne (generated in situ from 2,6-dibromo-l,5-bis[(p-tolylsulfonyl)oxy] naphthalene with 2-methylisoindole forms an adduct which upon oxidation with m-chloroperbenzoic acid affords dibenzo[fe,k]chrysene 7 (Scheme 3.5) [20]. 

This explains why 2 methyl butadiene reacts with maleic anhydride (the dienophile) at 30°C in the medium of dioxane with twice the speed as compared with butadiene. But under the same conditions butadiene reacts 10 times faster as compared with 2-chlorobutadiene which has an electron withdrawing group. Thermodynamically unstable compounds are the most reactive dienes. 

Now for some real examples. Most ene reactions with simple alkenes are with maleic anhydride. Other dienophiles—or enophiles as we should call them in this context—do not work very well. However, with one particular alkene, the natural terpene P-pinene from pine trees, reaction does occur with enophiles such as acrylates. 

Two years later the same group extended this work using maleic anhydride as the dienophile [149]. Despite their close structural similarity, both dienophiles behave quite differently (Scheme 63). In the absence of Lewis... 

The Diels-Alder reaction between a diene and a dienophile is one of the major synthetic reactions that are used for the formation of C C bonds. Its usefulness lies in the mild conditions and the predictable regio- and stereospecifidty of the process. For most purposes the thermal reaction requires the presence of an electron-withdrawing substituent on the alkene. The reaction is exemplified by the addition of the alkene of maleic anhydride as the dienophile to the diene of cyclopentadiene (Scheme 3.19). 

With maleic anhydride as the dienophile, the reaction leads exclusively to the endo form (23) of the nadic anhydride, e do-cis-bicyclo[2.2.1]hept-5-ene-2,3-dicarboxylic anhydride [129-64-6] (3). 

The Diels-Alder adducts 2 and 6 retain the anhydride function that was originally present in the dienophile, maleic anhydride. As a rule, this functionality is unstable in the presence of water even at pH 7 and hydrolyzes to a dicarboxylic acid according to the general sequence outlined in Scheme 12.1. This process is initiated by nucleophilic attack of water on the carbonyl function, followed by cleavage of a C-O bond of the anhydride. Because anhydrides are reactive toward water, it is important that the apparatus and reagents you use are dry to maximize the yield of cycloadduct. You may be instructed to prepare the dicarboxylic acids 7 and 8 by intentional hydrolysis of the corresponding anhydrides. Protocols for doing so are included in Part C of the experimental procedures. 

When producing Diels-Alder adducts using maleic anhydride as the dienophile, why is it important that the reagents and apparatus be dry ... 

Warrener, R.N. Russell, R.A. Lee, T.S. Tetrahedron Lett. 1977,18,49. Similar results were reported by Alder and Fremery [104a] using maleic anhydride as the dienophile. 

Donor substituents on the vinyl group further enhance reactivity towards electrophilic dienophiles. Equations 8.6 and 8.7 illustrate the use of such functionalized vinylpyrroles in indole synthesis[2,3]. In both of these examples, the use of acetyleneic dienophiles leads to fully aromatic products. Evidently this must occur as the result of oxidation by atmospheric oxygen. With vinylpyrrole 8.6A, adducts were also isolated from dienophiles such as methyl acrylate, dimethyl maleate, dimethyl fumarate, acrolein, acrylonitrile, maleic anhydride, W-methylmaleimide and naphthoquinone. These tetrahydroindole adducts could be aromatized with DDQ, although the overall yields were modest[3]. 

Maleic anhydride has been used in many Diels-Alder reactions (29), and the kinetics of its reaction with isoprene have been taken as proof of the essentially transoid stmcture of isoprene monomer (30). The Diels-Alder reaction of isoprene with chloromaleic anhydride has been analy2ed using gas chromatography (31). Reactions with other reactive hydrocarbons have been studied, eg, the reaction with cyclopentadiene yields 2-isopropenylbicyclo[2.2.1]hept-5-ene (32). Isoprene may function both as diene and dienophile in Diels-Alder reactions to form dimers. 

Concerted Nonpolar Reactions. Maleic anhydride exemplifies the model dienophile for cycloaddition with dienes such as 1,3-butadiene... 

Endo adducts are usually favored by iateractions between the double bonds of the diene and the carbonyl groups of the dienophile. As was mentioned ia the section on alkylation, the reaction of pyrrole compounds and maleic anhydride results ia a substitution at the 2-position of the pyrrole ring (34,44). Thiophene [110-02-1] forms a cycloaddition adduct with maleic anhydride but only under severe pressures and around 100°C (45). Addition of electron-withdrawiag substituents about the double bond of maleic anhydride increases rates of cycloaddition. Both a-(carbomethoxy)maleic anhydride [69327-00-0] and a-(phenylsulfonyl) maleic anhydride [120789-76-6] react with 1,3-dienes, styrenes, and vinyl ethers much faster than tetracyanoethylene [670-54-2] (46). 

Conjugation as well as geometric and positional isomerization occur when an alkadienoic acid such as linoleic acid is treated with a strong base at an elevated temperature. CycHc fatty acids result from isomerization of linolenic acid ia strong base at about 250°C (58). Conjugated fatty acids undergo the Diels-Alder reaction with many dienophiles including ethylene, propylene, acryUc acid, and maleic anhydride. 

In a study of the relative rates of addition of 20 dienophiles to cyclopentadiene, TCNE was at the head of the Hst, eg, it added 7700 times as rapidly as maleic anhydride (15). Reaction with most 1,3-dienes takes place rapidly and in high yield at room temperature. TCNE has often been used to characterize 1,3-dienes, including those that are unstable and difficult to isolate (16). 

Benz[/]isoindole (125), recently prepared from the p-toluene-sulfonyl derivative (124), proved to be too unstable for isolation, but eould be trapped in solution as the Diels-Alder adduct (127). The corresponding 1-phenyl derivative (126) was also prepared and, aecording to spectral measurements, reacts with maleic anhydride to give the product (128) derived by additive substitution. This subsequently rearranged to the adduct (129). The same behavior is observed in the reaction of (126) with V-phenylmaleimide. This provides the first clear indication that substitution products from isoindole derivatives and dienophiles can be converted into the normal addition products. 

Dihydropyridines 8 react with dienophiles such as A -phenyl maleimide (2) and l,2,4-triazoline-3,5-dione 9 to give the Diels-Alder adducts 10 and 11, respectively (76JHC481). Fowler observed that when a mixture of 1,2- and 1,4-dihydropyridines was treated with maleic anhydride (12), only 1,2-dihydro-pyridines yielded the Diels-Alder adducts 13, whereas the 1,4-dihydropyridines showed no reactivity with 12 (72JOC1321) (Scheme 1). 

Dimethylquinoxaline undergoes reaction with typical dienophiles such as maleic anhydride, p-benzoquinone, and AT-phenylmaleimide. The products were formulated as Diels-Alder adducts primarily since analogous products were not isolated from reactions with other quin-... 

Maleic anhydride is a convenient dienophile because of its rapid reaction with most dienes as well as its stability and ease in handling (although it is poisonous). The diene for this reaction, 1,4-diphenyl-1,3-butadiene, is readily prepared by the Wittig reaction with benzyltriphenylphosphonium chloride and cinnamaldehyde (Chapter 11, Section I). 

The Diels-Alder cycloadclition reaction occurs most rapidly if the alkene component, or dienophile ("diene lover"), has an electron-withdrawing substituent group. Thus, ethylene itself reacts sluggishly, but propenal, ethyl propenoate, maleic anhydride, benzoquinone, propenenitrile, and similar compounds are highly reactive. Note also that alkynes, such as methyl propynoate, can act as Diels-Alder dienophiles. 

Ethyl l//-azepine-l-carboxylate (1) fails to react with simple dienophiles such as maleic anhydride and dimethyl acetylenedicarboxylate, even at 100 C 250 however, with /V-phcnyl-maleimide a [4 + 2] cycloadduct at the C2 — C5 diene system is produced.251... 

We have also used poly(propynoic acid) in our studies of the photochemical interaction of PCSs with dienophiles, such as maleic anhydride, tetracyanoethylene, and styrene. This photochemical reaction of Diels-Alder type is accompanied by the breakdown of the conjugation system and the formation of slightly colored adducts266. Together with the cycloaddition reaction, photodegradation of PPA and its adducts takes place. A cycloaddition reaction is always preceded by the formation of a donor-acceptor complex of a PCS with a dienophile. 

The comparison of rates of cycloaddition of maleic anhydride, tetracyanoethylene, and styrene to PPA shows that the latter, irrespective of the presence of electronegative groups, behaves in these reactions not as an electron-poor diene system. This fact, together with the composition of side products (giving evidence of PPA decarboxylation), allows the assumption to be made that the cycloaddition of dienophiles involves mainly decarboxylated polyene sections of cis-transoid structure213, 266. This is in agreement with the fact that PPA with predominant trans-transoid configuration interacts with these dienophiles at a substantially lower rate. The ultimate amounts of the dienophile combined with PPA of this structure is also considerably smaller. 

All attempts to prepare other [2 + 4] cycloadducts of sulfoxides 115 with dienophiles such as maleic anhydride, ethyl azodicarboxylate, etc., have failed60. A method for preparing ordinary alkyl-substituted thiirene oxides (e.g. 18 R1 = R2 = alkyl) is still lacking. 

---