Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Long oil polyester

The thermal properties of polyesters are of the greatest importance for their end applications. The important features of a polymer, such as bond strength, inter-and intra-molecular forces, resonance stability, crystallinity, structural imperfections and molecular weight, are responsible for their thermal behaviour. Long oil polyester resin and styrenated polyester resin are made flame retardant by the incorporation of bis-pyridine, bis-tribromophenoxo copper complex and polydibromophenylene oxide. [Pg.119]

The ester class also comprises natural oils, such as vegetable oil [75] spent sunflower oil [940,941,992,993] and natural fats, for example, sulfonated flsh fat [161]. In water-based mud systems no harmful foams are formed from partially hydrolyzed glycerides of predominantly unsaturated Ci6 to C24 fatty acids. The partial glycerides can be used at low temperatures and are biodegradable and nontoxic [1280]. A composition for high-temperature applications is available [1818]. It is a mixture of long chain polyesters and polyamides. [Pg.15]

Another common approach to water-based coating formulations is post-emulsification of a polymer in water. Several condensation polymers, e.g. alkyds, i.e. fatty-acid-modified polyesters, polyurethanes and epoxy resins, have been made into dispersions by the use of a suitable emulsifier and application of high shear. For instance, long oil alkyd resins of the type used in white-spirit-based formulations have been successfully emulsified by using nonionic surfactants such as fatty alcohol ethoxylates, alkylphenol ethoxylates or fatty acid monoethanolamide ethoxylates. Neutralization of alkyd carboxylic groups helps in producing small emulsion droplets and with the proper choice of surfactant, droplet diameters of less than 1 pm can be obtained. Such dispersions are sufficiently stable for most applications. [Pg.111]

In selecting a solvent for a certain binder, one of the oldest rules still holds alike dissolves alike . Thus a solvent with a similar basic structure as the solute and a volatility adapted to the application technique was chosen as the first approach. For instance, for a long oil alkyd a low aromatic hydrocarbon solvent and for a short oil alkyd, containing relatively more aromatic entities, a high aromatic spirit or a pure aromatic solvent were suitable starting points. For polyesters, ester type solvents came under consideration. Brush... [Pg.49]

CPA. Copolymer alloy membranes (CPAs) are made by alloying high molecular weight polymeries, plasticizers, special stabilizers, biocides, and antioxidants with poly(vinyl chloride) (PVC). The membrane is typically reinforced with polyester and comes in finished thicknesses of 0.75—1.5 mm and widths of 1.5—1.8 m. The primary installation method is mechanically fastened, but some fully adhered systems are also possible. The CPA membranes can exhibit long-term flexibiHty by alleviating migration of the polymeric plasticizers, and are chemically resistant and compatible with many oils and greases, animal fats, asphalt, and coal-tar pitch. The physical characteristics of a CPA membrane have been described (15). [Pg.213]

Paraplex. A trademark for a group of alkyd type polymeric materials known as polyester resins. These resins are primarily long chain polybasic acids esterified with polyhydric alcohols such as glycol sebacate, glycerol, or ethylene glycol. Some are oil-modified while others are unmodified polyesters... [Pg.489]

The use of oleochemicals in polymers has a long tradition. One can differentiate between the use as polymer materials, such as linseed oil and soybean oil as drying oils, polymer stabilizers and additives, such as epoxidized soybean oil as plasticizer, and building blocks for polymers, such as dicarboxylic acids for polyesters or polyamides (Table 4.2) [7]. Considering the total market for polymers of ca. 150 million tonnes in 1997 the share of oleochemical based products is relatively small - or, in other terms, the potential for these products is very high. Without doubt there is still a trend in the use of naturally derived materials for polymer applications, especially in niche markets. As an example, the demand for linseed oil for the production of linoleum has increased from 10000 tonnes in 1975 to 50 000 tonnes in 1998 (coming from 120000 tonnes in 1960 ) [8a]. Epoxidized soybean oil (ESO) as a plastic additive has a relatively stable market of ca. 100000 tonnes year-1 [8b]. [Pg.79]

The domination of PET is likely to continue so long as the raw material costs remain low, and these are currently driven by the cost of oil. Although synthetic fibers use only 1 % of the petroleum stream, they are in competition for that resource with fuels which use up to 50 times as much. Chemical producers already have efforts in place to supply raw materials for PET from renewable biological sources, so it is possible that even the increasing cost of oil will not diminish the dominance of polyester. When contrasted with increasing costs of land and resources for natural fiber production, as food for an increasing population competes for the same land, the use of PET fibers will likely become even more prevalent than today. [Pg.432]


See other pages where Long oil polyester is mentioned: [Pg.97]    [Pg.98]    [Pg.115]    [Pg.120]    [Pg.97]    [Pg.98]    [Pg.115]    [Pg.120]    [Pg.32]    [Pg.119]    [Pg.3300]    [Pg.3301]    [Pg.32]    [Pg.119]    [Pg.160]    [Pg.109]    [Pg.109]    [Pg.118]    [Pg.119]    [Pg.1439]    [Pg.4086]    [Pg.931]    [Pg.135]    [Pg.30]    [Pg.60]    [Pg.565]    [Pg.82]    [Pg.49]    [Pg.176]    [Pg.115]    [Pg.332]    [Pg.1944]    [Pg.2034]    [Pg.309]    [Pg.133]    [Pg.1199]    [Pg.581]    [Pg.197]    [Pg.175]    [Pg.68]    [Pg.2]   
See also in sourсe #XX -- [ Pg.97 , Pg.120 ]




SEARCH



© 2024 chempedia.info