Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Water-based coatings

Copolymers with butadiene, ie, those containing at least 60 wt % butadiene, are an important family of mbbers. In addition to synthetic mbber, these compositions have extensive uses as paper coatings, water-based paints, and carpet backing. Because of unfavorable reaction kinetics in a mass system, these copolymers are made in an emulsion polymerization system, which favors chain propagation but not termination (199). The result is economically acceptable rates with desirable chain lengths. Usually such processes are mn batchwise in order to achieve satisfactory particle size distribution. [Pg.520]

TL 4190. [Mace Adhesives Coatings] Water-based polyester film laminating adhesive. [Pg.377]

Woodtreat WB. [Kop-Coat] Water-based rqiellent preservative for mill-woik treatment... [Pg.409]

MAJOR USES Used in manufacture of plastic masses, films, lacquers, emulsion paint substances, glue, adhesives, paper coatings, water-based paints, inks, hairsprays and chewing gum. [Pg.215]

The water disperdons are used mainly in putties aUd in coatings. Water-based puttira have been used in sealing the jmnts in aircraft fuel tanks. The coatings are useful for resistance to corrosion and to wind and sand... [Pg.990]

Chem. Descrip. Oxidized polyethylene CAS 68441-17-8 EINECS/ELINCS 200-815-3 Uses Rub resist, aid for printing inks surf, modifier for lacquers, coatings, water-based coatings... [Pg.181]

Chem. Descrip. Silicone glycol copolymer in toluene Uses Mar resist, aid, slip agent, rub resist, aid, abrasion resist, aid in org. resin inks, paints/coatings, water-based, solv.-based, and high-solids formulations... [Pg.274]

Chem. Descrip. Amorphous hydrated siiica CAS 7631-86-9 EINECS/ELINCS 231-545-4 Uses Matting agent in soivent- and water-borne architectural paints, board, coii and can coatings (< 0.75 mii), eiectrocoat primers, general industrial coatings, water-based coatings, printing inks, radiation-cured systems (< 0.75 mii), vinyi topcoats Features Med. porosity... [Pg.374]

Chem. Descrip. Manganese-based drier complex Uses Drier for urethane alkyd lacquers such as floor coatings, water-based coatings such as amine-neutralized resins, water-emulsifiable alkyds, and alkyd-actylics Features Cobalt-free... [Pg.583]

Uses Defoamer for high gloss aq. coatings, water-based metalworking fluids... [Pg.700]

Uses Photoinitiator for water-based and pigmented coatings, water-based inks... [Pg.723]

Chem. Descrip. Org. zinc complex in solv. mixt. with small nitrite addition Uses Rust/corrosion inhibitor for water-based paints/coatings, water-based industrial primers, water-reducible alkyds temporary mst inhibitor for metal surfs, when emulsified in water 2%... [Pg.730]

Uses Rust/corrosion inhibitor for water-based paints/coatings, water-based industrial primers, water-reducible alkyds Features Flash rust/in-can corrosion inhibitor nitrite-free provides belter dried film corrosion protection than water-sol. salts Properties Yel. clear liq. disp. in water sol. in glycol ether, insol. in min. spirits sp.gr. 1.06 dens. 1040 kg/m bulk dens. 8.83 Ib/gal vise. 200 mPa s max. flash pt. > 52 C pH 8.0-10.0 anionic Use Level 0.1 -0.6% (on total formulation wt.)... [Pg.730]

Uses Defoamer for water-based systems, gloss and high-gloss emulsion paints, water-based clear coatings, water-based industrial systems, wood/furniture coatings, printing inks, silicate-based masonry paints/ coatings... [Pg.731]

Electrolytic compositions Glass fiber sizes Electrophoretic materials Steel pipe coatings Electrophoretic coatings Water-based paints Electrophoretic... [Pg.685]

Eurthermore, defoamers are used to prevent or dissipate foams. Eoam can be formed during manufacturing and application of coatings. Water-based formulations are especially susceptible due to the presence of surface-active molecules, such as emulsifiers. If the bubbles are stabilised and long-lived they can interfere with the efficiency of manufacturing or leave unwanted voids in the dried film. Defoamers destabilise and break-up foam in the liquid coating. Most commonly, silicon- and hydrocarbon-based dispersions or emulsions are used. [Pg.242]

C Passive fire barrier coating, Water-based latex paint, No halogenated compounds Intumescent Failed Failed... [Pg.2354]


See other pages where Water-based coatings is mentioned: [Pg.279]    [Pg.354]    [Pg.462]    [Pg.636]    [Pg.462]    [Pg.354]    [Pg.279]    [Pg.383]    [Pg.58]    [Pg.404]    [Pg.279]    [Pg.404]    [Pg.462]    [Pg.177]    [Pg.213]    [Pg.230]    [Pg.374]    [Pg.597]    [Pg.665]    [Pg.441]    [Pg.1129]   
See also in sourсe #XX -- [ Pg.242 ]




SEARCH



AVID RANDALL 2 Water based coatings

Base coats

Based Coatings

Coatings water

Concrete coatings epoxy, water-based

Emulsion paints and water-based coatings

Microwave drying for water-based coatings

Surface coatings water based

Water-based

© 2024 chempedia.info