Lithium synthesis

Cuprous iodide lithium Synthesis of allenes from acoxy-2-acetylenes... 

Cuprous iodide lithium Synthesis of ethylene derivs. from acoxy-2-ethylenes... 

Mantymaki, M., Rifcda, M., and Leskela, M. (2012) Double metal alkoxides of lithium synthesis, structure and applications in materials chemistry. 

Treatment of geminal dihalocyclopropyl compounds with a strong base such as butyl lithium has been for several years the most versatile method for cumulenes. The dihalo compounds are easily obtained by addition of dihalocarbenes to double--bond systems If the dihalocyclopropanes are reacted at low temperatures with alkyllithium, a cyclopropane carbenoid is formed, which in general decomposes above -40 to -50°C to afford the cumulene. Although at present a number of alternative methods are available , the above-mentioned synthesis is the only suitable one for cyclic cumulenes [e.g. 1,2-cyclononadiene and 1,2,3-cyclodecatriene] and substituted non-cyclic cumulenes [e.g. (CH3)2C=C=C=C(CH3)2]. 

The formation of the above anions ("enolate type) depend on equilibria between the carbon compounds, the base, and the solvent. To ensure a substantial concentration of the anionic synthons in solution the pA" of both the conjugated acid of the base and of the solvent must be higher than the pAT -value of the carbon compound. Alkali hydroxides in water (p/T, 16), alkoxides in the corresponding alcohols (pAT, 20), sodium amide in liquid ammonia (pATj 35), dimsyl sodium in dimethyl sulfoxide (pAT, = 35), sodium hydride, lithium amides, or lithium alkyls in ether or hydrocarbon solvents (pAT, > 40) are common combinations used in synthesis. Sometimes the bases (e.g. methoxides, amides, lithium alkyls) react as nucleophiles, in other words they do not abstract a proton, but their anion undergoes addition and substitution reactions with the carbon compound. If such is the case, sterically hindered bases are employed. A few examples are given below (H.O. House, 1972 I. Kuwajima, 1976). 

Several substituted cyclohexane derivatives may also be obtained by the reduction of a benzenoid precursor. Partial reduction of resorcinol, for example, and subsequent methyla-tion yields 2-methylcyclohexane-I,3-dione, which is frequently used in steroid synthesis (M.S. Newman, 1960 see also p. 71f.), From lithium-ammonia reduction of alkoxybenzenes l-alkoxy-l,4-cyclohexadienes are obtained (E.J. Corey, 1968 D). 

Synthesis by high-dilution techniques requires slow admixture of reagents ( 8-24 hrs) or very large volumes of solvents 100 1/mmol). Fast reactions can also be carried out in suitable flow cells (J.L. Dye, 1973). High dilution conditions have been used in the dilactam formation from l,8-diamino-3,6-dioxaoctane and 3,6-dioxaoctanedioyl dichloride in benzene. The amide groups were reduced with lithium aluminum hydride, and a second cyclization with the same dichloride was then carried out. The new bicyclic compound was reduced with diborane. This ligand envelops metal ions completely and is therefore called a cryptand (B. Dietrich, 1969). 

The benzylidene derivative above is used, if both hydroxyl groups on C-2 and C-3 are needed in synthesis. This r/vzns-2,3-diol can be converted to the sterically more hindered a-cpoxide by tosylation of both hydroxy groups and subsequent treatment with base (N.R. Williams, 1970 J.G. Buchanan, 1976). An oxide anion is formed and displaces the sulfonyloxy group by a rearside attack. The oxirane may then be re-opened with nucleophiles, e.g. methyl lithium, and the less hindered carbon atom will react selectively. In the following sequence starting with an a-glucoside only the 2-methyl-2-deoxyaltrose is obtained (S. Hanessian, 1977). 

J. Rebek, Jr., (1987) first developed a new synthesis of Kemp s acid and then extensively explored its application in model studies. The synthesis involves the straightforward hydrogenation (A. Steitz, 1968), esterification and methylation of inexpensive 1,3,5-benzenetricar-boxylic acid (trimesic acid 30/100 g). The methylation of the trimethyl ester with dimethyl sulfate, mediated by lithium diisopropylamide (V. J. Shiner, 1981), produced mainly the desired aff-cis-1,3,5-trimethyl isomer, which was saponified to give Kemp s acid. 

Zinc acetylides, prepared in situ by the treatment of lithium acetylides with ZnCF, are widely used. The zinc acetylide 311, prepared in situ, reacts with (Z)-3-iodo-2-buten-l-ol (312) with nearly complete retention of stereochemistry to afford an important intermediate 313 for carotenoid synthesis[227]. 

Hydroxyalkylthiazoles are also obtained by cyclization or from alkoxyalkyl-thiazoles by hydrolysis (36, 44, 45, 52, 55-57) and by lithium aluminium hydride reduction of the esters of thiazolecarboxylic acids (58-60) or of the thiazoleacetic adds. The Cannizzaro reaction of 4-thiazolealdehyde gives 4-(hydroxymethyl)-thiazole (53). The main reactions of hydroxyalkyl thiazoles are the synthesis of halogenated derivatives by the action of hydrobroraic acid (55, 61-63), thionyl chloride (44, 45, 63-66), phosphoryl chloride (52, 62, 67), phosphorus penta-chloride (58), tribromide (38, 68), esterification (58, 68-71), and elimination that leads to the alkenylthiazoles (49, 72). 

The reaction of esters with Gngnard reagents and with lithium aluminum hydride both useful m the synthesis of alcohols were described earlier They are reviewed m Table 20 4 on page 848... 

The first reported synthesis of acrylonitrile [107-13-1] (qv) and polyacrylonitrile [25014-41-9] (PAN) was in 1894. The polymer received Htde attention for a number of years, until shortly before World War II, because there were no known solvents and the polymer decomposes before reaching its melting point. The first breakthrough in developing solvents for PAN occurred at I. G. Farbenindustrie where fibers made from the polymer were dissolved in aqueous solutions of quaternary ammonium compounds, such as ben2ylpyridinium chloride, or of metal salts, such as lithium bromide, sodium thiocyanate, and aluminum perchlorate. Early interest in acrylonitrile polymers (qv), however, was based primarily on its use in synthetic mbber (see Elastomers, synthetic). 

Chemical Properties. Trimethylpentanediol, with a primary and a secondary hydroxyl group, enters into reactions characteristic of other glycols. It reacts readily with various carboxyUc acids and diacids to form esters, diesters, and polyesters (40). Some organometaUic catalysts have proven satisfactory for these reactions, the most versatile being dibutyltin oxide. Several weak bases such as triethanolamine, potassium acetate, lithium acetate, and borax are effective as stabilizers for the glycol during synthesis (41). 

Although a few simple hydrides were known before the twentieth century, the field of hydride chemistry did not become active until around the time of World War II. Commerce in hydrides began in 1937 when Metal Hydrides Inc. used calcium hydride [7789-78-8J, CaH2, to produce transition-metal powders. After World War II, lithium aluminum hydride [16853-85-3] LiAlH, and sodium borohydride [16940-66-2] NaBH, gained rapid acceptance in organic synthesis. Commercial appHcations of hydrides have continued to grow, such that hydrides have become important industrial chemicals manufactured and used on a large scale. 

ButyUithium is available as a 15—20 wt % solution in //-pentane or heptane. Noticeable decomposition occurs after alb reflux in heptane (bp 98.4°C) but not after a 15 min reflux in ben2ene (bp 80.1°C) or hexane (bp 68°C). /-ButyUithium in pentane or heptane is more stable than //-butyUithium in hexane (125). Solutions of /-butyUithium in pentane and heptane are flammable Hquids and are considered pyrophoric. The /-butyl compound is more reactive than either the n- and sec-huty. Di-//-butylether is cleaved by /-butyUithium in 4—5 h at 25°C, compared to the 2 d for j iZ-butyUithium and 32 d for //-butyUithium (126). /-ButyUithium can be assayed by aU of the techniques used for //-butyUithium. /-ButyUithium is a useful reagent in syntheses where the high reactivity of the carbon—lithium bond and smaU si2e of the lithium atom promote the synthesis of stericaUy hindered compounds, eg,... 

---