Isomerization, catalytic

Isomerization Catalytic process to improve the octane number of gasoline fractions. Based on isomerization reactions of n-alkanes. 

Hydrogen Transfer and Redox Isomerization. Catalytic hydrogen transfer from a suitable hydrogen donor to a substrate is a useful way to reduce... 

Isomerization Catalytic rearrangement of straight chain to Light gasoline High octane gasoline (iso-... 

Feed pretreatment for conversion processes such as isomerization, catalytic reforming, catalytic cracking, and HDC, aiming at reducing the amount of sulfur, nitrogen (particularly basic nitrogen), metals, and polynuclear... 

COT is prepared by the polymerization of ethyne at moderate temperature and pressure in the presence of nickel salts. The molecule is non-planar and behaves as a typical cyclic olefin, having no aromatic properties. It may be catalytically hydrogenated to cyclo-octene, but with Zn and dil. sulphuric acid gives 1,3,6-cyclooclairiene. It reacts with maleic anhydride to give an adduct, m.p. 166 C, derived from the isomeric structure bicyclo-4,2,0-octa-2,4,7-triene(I) ... 

Feedstock (after pretreatment) Catalytic refon ng Isomerization... 

Both acids 3deld succinic acid, m.p. 185°, upon catalytic reduction (see Section 111,150), thus establishing their structures. Maleic and fumaric acids are examples of compounds exhibiting cis-trans isomerism (or geometric isomerism). Maleic acid has the cm structure since inter alia it readily 3delds the anhydride (compare Section 111,93). Fumaric acid possesses the trans structure it does not form an anhydride, but when heated to a high temperature gives maleic anhydride. 

A simple application of the reaction may bo mentioned. Refluxing of (I) with 48 per cent, hydrobromic aeid and glacial acetic acid leads to hydrolysis and decarboxylation and the production of a mixture of the yl tctone yr-di-phonylbutyrolaotone (II) and the isomeric unsaturated acid yY-dlphenyl-vinylacotic acid (III) reduction by the Clemmonsen method or catalytically... 

BASE-PROMOTED INTERCONVERSIONS BETWEEN ACETYLENES AND CUMULENES 1. ISOMERIZATIONS WITH CATALYTIC AMOUNTS OF BASE... 

The composition of the products from the isomerization of an unsaturated compound under the influence of a catalytic amount of a base is governed by the relative thermodynamic stabilities of the starting compound and the product. Of particular synthetic interest are isomerizations in which there is an accumulation of an isomer in the isomerization sequence. Isolation of the desired intermediate in a reasonable state of purity is often a matter of careful selection of the base and the solvent. The following reactions are representative examples ... 

This isomerization, which must proceed through a 1,2,3-trienylanine, is not "contra-thermodynamic", since with a catalytic amount of potassium tert.-butoxide the same result is obtained. Enyne ethers, H2C=CH-CsC-0R, undergo a similar conversion into HCeC-CH=CH-OR upon interaction with alkali metal amides in liquid NH3, followed by hydrolysis . Enyne sulphides, H2C=CH-CsC-SR, and the hydrocarbons H2C=CH-CsC-R (R = or phenyl) give only tars or polymeric products under... 

In the first method a secondary acetylenic bromide is warmed in THF with an equivalent amount of copper(I) cyanide. We found that a small amount of anhydrous lithium bromide is necessary to effect solubilization of the copper cyanide. Primary acetylenic bromides, RCECCH Br, under these conditions afford mainly the acetylenic nitriles, RCsCCHjCsN (see Chapter VIII). The aqueous procedure for the allenic nitriles is more attractive, in our opinion, because only a catalytic amount of copper cyanide is required the reaction of the acetylenic bromide with the KClV.CuCN complex is faster than the reaction with KCN. Excellent yields of allenic nitriles can be obtained if the potassium cyanide is added at a moderate rate during the reaction. Excess of KCN has to be avoided, as it causes resinifi-cation of the allenic nitrile. In the case of propargyl bromide 1,1-substitution may also occur, but the propargyl cyanide immediately isomerizes under the influence of the potassium cyanide. 

Note 2. Propargyl bromide itself also reacts with ammonia and therefore the interval between the addition of this compound and its conversion with the enethiolate should be kept as short as possible. Inverse addition was applied if propargyl bromide is added to the enthiolate solution, the primary product partly isomerizes into H2C=C(5C2Hs)SCH=C=CH2 under the catalytic influence of the enethiolate. 

Diacetoxylation of various conjugated dienes including cyclic dienes has been extensively studied. 1,3-Cyclohexadiene was converted into a mixture of isomeric l,4-diacetoxy-2-cyclohexenes of unknown stereochemistry[303]. The stereoselective Pd-catalyzed 1,4-diacetoxylation of dienes is carried out in AcOH in the presence of LiOAc and /or LiCI and beiizoquinone[304.305]. In the presence of acetate ion and in the absence of chloride ion, /rau.v-diacetox-ylation occurs, whereas addition of a catalytic amount of LiCl changes the stereochemistry to cis addition. The coordination of a chloride ion to Pd makes the cis migration of the acetate from Pd impossible. From 1,3-cyclohexadiene, trans- and ci j-l,4-diacetoxy-2-cyclohexenes (346 and 347) can be prepared stereoselectively. For the 6-substituted 1,3-cycloheptadiene 348, a high diaster-eoselectivity is observed. The stereoselective cij-diacetoxylation of 5-carbo-methoxy-1,3-cyclohexadiene (349) has been applied to the synthesis of dl-shikimic acid (350). 

In the alkylative cyclization of the 1,6-enyne 372 with vinyl bromide, formation of both the five-membered ring 373 by exn mode carbopalladation and isomerization of the double bonds and the six-membered ring 374 by endo mode carbopalladation are observed[269]. Their ratio depends on the catalytic species. Also, the cyclization of the 1,6-enyne 375 with /i-bromostyrene (376) affords the endo product 377. The exo mode cyclization is commonly observed in many cases, and there are two possible mechanistic explanations for that observed in these examples. One is direct endo mode carbopalladation. The other is the exo mode carbopalladation to give 378 followed by cyclopropana-tion to form 379, and the subsequent cyclopropylcarbinyl-homoallyl rearrangement affords the six-membered ring 380. Careful determination of the E or Z structure of the double bond in the cyclized product 380 is crucial for the mechanistic discussion. 

Furthermore, the catalytic allylation of malonate with optically active (S)-( )-3-acetoxy-l-phenyl-1-butene (4) yields the (S)-( )-malonates 7 and 8 in a ratio of 92 8. Thus overall retention is observed in the catalytic reaction[23]. The intermediate complex 6 is formed by inversion. Then in the catalytic reaction of (5 )-(Z)-3-acetoxy-l-phenyl-l-butene (9) with malonate, the oxidative addition generates the complex 10, which has the sterically disfavored anti form. Then the n-a ir rearrangement (rotation) of the complex 10 moves the Pd from front to the rear side to give the favored syn complex 6, which has the same configuration as that from the (5 )-( )-acetate 4. Finally the (S)-( )-mal-onates 7 and 8 are obtained in a ratio of 90 10. Thus the reaction of (Z)-acetate 9 proceeds by inversion, n-a-ir rearrangement and inversion of configuration accompanied by Z to isomerization[24]. 

An active catalytic species in the dimerization reaction is Pd(0) complex, which forms the bis-7r-allylpalladium complex 3, The formation of 1,3,7-octa-triene (7) is understood by the elimination of/5-hydrogen from the intermediate complex 1 to give 4 and its reductive elimination. In telomer formation, a nucleophile reacts with butadiene to form the dimeric telomers in which the nucleophile is introduced mainly at the terminal position to form the 1-substituted 2,7-octadiene 5. As a minor product, the isomeric 3-substituted 1,7-octadiene 6 is formed[13,14]. The dimerization carried out in MeOD produces l-methoxy-6-deuterio-2,7-octadiene (10) as a main product 15]. This result suggests that the telomers are formed by the 1,6- and 3,6-additions of MeO and D to the intermediate complexes I and 2. 

Xylene Isomerization. After separation of the preferred xylenes, ie, PX or OX, using the adsorption or crystallization processes discussed herein, the remaining raffinate stream, which tends to be rich in MX, is typically fed to a xylenes isomerization unit in order to further produce the preferred xylenes. Isomerization units are fixed-bed catalytic processes that are used to produce a close-to-equiUbrium mixture of the xylenes. To prevent the buildup of EB in the recycle loop, the catalysts are also designed to convert EB to either xylenes, benzene and lights, or benzene and diethylbenzene. 

Dual Function Catalytic Processes. Dual-function catalytic processes use an acidic oxide support, such as alumina, loaded with a metal such as Pt to isomerize the xylenes as weH as convert EB to xylenes. These catalysts promote carbonium ion-type reactions as weH as hydrogenation—dehydrogenation. In the mechanism for the conversion of EB to xylenes shown, EB is converted to xylenes... 

Thiothionyl Fluoride and Difluorodisulfane. Thiothionyl fluoride [1686-09-9] S=SF2, and difluorodisulfane [13709-35-8] FSSF, are isomeric compounds which may be prepared as a mixture by the action of various metal fluorides on sulfur vapor or S2CI2 vapor. Chemically, the two isomers are very similar and extremely reactive. However, in the absence of catalytic agents and other reactive species, FSSF is stable for days at ordinary temperatures and S=SF2 may be heated to 250°C without significant decomposition (127). Physical properties of the two isomers are given in Table 6. The microwave spectmm of S=SF2 has been reported (130). 

Alternatively the alkylated aromatic products may rearrange. -Butylbenzene [104-57-8] is readily isomerized to isobutylbenzene [538-93-2] and j Abutyl-benzene [135-98-8] under the catalytic effect of Friedel-Crafts catalysts. The tendency toward rearrangement depends on the alkylatiag ageat and the reaction conditions (catalyst, solvent, temperature, etc). 

Carbocations generated from alkanes using superacids react with carbon monoxide under mild conditions to form carboxyUc acid (188). In this process isomeric carboxyUc acids are produced as a mixture. However, when the reaction is mn with catalytic amounts of bromine (0.3 mmol eq) in HF-SbF solution, regio-selective carboxylation is obtained. / -Propane was converted almost exclusively to isobutyric acid under these conditions. 

Isomerization. Isomerization is a catalytic process which converts normal paraffins to isoparaffins. The feed is usually light virgin naphtha and the catalyst platinum on an alumina or zeoflte base. Octanes may be increased by over 30 numbers when normal pentane and normal hexane are isomerized. Another beneficial reaction that occurs is that any benzene in the feed is converted to cyclohexane. Although isomerization produces high quahty blendstocks, it is also used to produce feeds for alkylation and etherification processes. Normal butane, which is generally in excess in the refinery slate because of RVP concerns, can be isomerized and then converted to alkylate or to methyl tert-huty ether (MTBE) with a small increase in octane and a large decrease in RVP. 

Ethers, such as MTBE and methyl / fZ-amyl ether (TAME) are made by a catalytic process from methanol (qv) and the corresponding isomeric olefin. These ethers have excellent octane values and compete on an economic basis with alkylation for inclusion in gasoline. Another ether, ethyl tert-huty ether (ETBE) is made from ethanol (qv) and isobutylene (see Butylenes). The cost and economic driving forces to use ETBE vs MTBE or TAME ate a function of the raw material costs and any tax incentives that may be provided because of the ethanol that is used to produce it. 

Isomerization. Maleic acid is isomerized to fumaric acid by thermal treatment and a variety of catalytic species. Isomerization occurs above the 130 to 140°C melting point range for maleic acid but below 230°C, at which point fumaric acid is dehydrated to maleic anhydride. Derivatives of maleic acid can also be isomerized. Kinetic data are available for both the uncatalyzed (73) and thiourea catalyzed (74) isomerizations of the cis to trans diacids. These data suggest that neither carbonium ion nor succinate intermediates are involved in the isomerization. Rather, conjugate addition imparts sufficient single bond character to afford rotation about the central C—C bond of the diacid (75). 

---