Isomerism of acids

Isomer stabilities and activation energies have been calculated for keto-enol tautomerization of simple carbonyl compounds, MeC(R)=X (X = O R = H, Me) 129 both specific and bulk solvent effects have been analysed. Related isomerizations of acid derivatives (R = F, CN) and other related structures (R = H X = CF12, NH, S) are compared. 

The reactive intermediate o-quinodimethane (84) has been generated in room-temperature solutions from l,2-bis[(phenylseleno)methyl]benzene (85) by sequential, two-colour laser irradiation. A third laser was then used to induce photorearrangement of (84) to benzocyclobutene. Owing to the high thermal reactivity of (84), room-temperature photoreactions of (84) have not previously been observed. Diphenyl diselenide (Ph2Se2) has been shown to be an effective catalyst - an alternative to iodine - for the photochemical stereoisomerization of carotenoids. Unlike iodine, Ph2Se2 tolerates the presence of Hunig s base in the isomerization of acid-sensitive carotenoids. In... 

Colourless crystals m.p. 204 C. Prepared by photochemical isomerization ofcilraconic acid in the presence of bromine. 

Both acids 3deld succinic acid, m.p. 185°, upon catalytic reduction (see Section 111,150), thus establishing their structures. Maleic and fumaric acids are examples of compounds exhibiting cis-trans isomerism (or geometric isomerism). Maleic acid has the cm structure since inter alia it readily 3delds the anhydride (compare Section 111,93). Fumaric acid possesses the trans structure it does not form an anhydride, but when heated to a high temperature gives maleic anhydride. 

A simple application of the reaction may bo mentioned. Refluxing of (I) with 48 per cent, hydrobromic aeid and glacial acetic acid leads to hydrolysis and decarboxylation and the production of a mixture of the yl tctone yr-di-phonylbutyrolaotone (II) and the isomeric unsaturated acid yY-dlphenyl-vinylacotic acid (III) reduction by the Clemmonsen method or catalytically... 

Apart from Bronsted acid activation, the acetyl cation (and other acyl ions) can also be activated by Lewis acids. Although the 1 1 CH3COX-AIX3 Friedel-Crafts complex is inactive for the isomerization of alkanes, a system with two (or more) equivalents of AIX3 was fonnd by Volpin to be extremely reactive, also bringing abont other electrophilic reactions. 

Nitration in acetic acid, in sulpholan and in carbon tetrachloride showed kinetic phenomena similar to those shown in nitromethane this is significant for it denies nitromethane a chemical involvement in the slow step. (Originally the rate of isomerization of nitromethane to its aci-form was believed to be a factor in the reaction. )... 

If two equivalents of the reagents are used, disubstitution to ECeC-CH(E)R occurs in most cases, but interestingly the reaction of LiCeCCH(Li)R with an excess of COj gives mainly the allenic dicarboxylic acids. These are probably the result of a rapid isomerization of the primary dilithium salt of the acetylenic diacid during the work-up or during the reaction of the dilithio compound with COj ... 

Uote 2. The product can isomerize in the presence of traces of acids, giving... 

Note 1. This addition is to ensure that no traces of acids are present which cause isomerization to H2C=CH-C(0CH3)=CH-C5Hi i. All glassware of the distillation apparatus was therefore rinsed with a dilute solution of... 

Note. 3. All glassware of the distillation apparatus must be rinsed before use with a dilute solution of triethylamine Or another volatile amine in diethyl ether. Traces of acid on the glass walls may cause isomerization to H2C=CH-C(OCH3)=C(CH3)(OC2H5). 

Hate 3. All glassware used for the work-up and distillation must be rinsed with a dilute solution of triethylamine in diethyl ether or acetone in order to be sure that traces of acids on the glass walls have been neutralized. Allenic sulfides with the structure C=C=C(SR)-CH- isomerize under the influence of acids to give conjugated dienes, C=C-C(SR)=C. 

Spherical, pentagonal dodecahedrane is the thermodynamically most stable CjoHjo-polycycloalkane. It is the so-called CjjHjo stabilomer . It should therefore be available by thermod5mamically controlled, e.g. acid-catalyzed, isomerization of less stable C24H20-isomers. Experiments along this line, e.g. treatment of the basketene photo-dimer with Lewis... 

The 3.8-nonadienoate 91, obtained by dimerization-carbonylation, has been converted into several natural products. The synthesis of brevicomin is described in Chapter 3, Section 2.3. Another royal jelly acid [2-decenedioic acid (149)] was prepared by cobalt carbonyl-catalyzed carbonylation of the terminal double bond, followed by isomerization of the double bond to the conjugated position to afford 149[122], Hexadecane-2,15-dione (150) can be prepared by Pd-catalyzed oxidation of the terminal double bond, hydrogenation of the internal double bond, and coupling by Kolbe electrolysis. Aldol condensation mediated by an organoaluminum reagent gave the unsaturated cyclic ketone 151 in 65% yield. Finally, the reduction of 151 afforded muscone (152)[123]. n-Octanol is produced commercially as described beforc[32]. 

Able to form Ag salt of lower solubility than AgQ in H2O. Therefore applications in photographic processes Inhibition of histidine decarboxylase activity Antifoggant for color films Anthelmintic activity Quenching for oil composition caialj si for the industrial isomerization of cis a, (3 unsaturaied carboxylic acids rubber vul-cankzate improver... 

Acid catalyzed hydration (Section 9 12) Water adds to the triple bond of alkynes to yield ketones by way of an unstable enol intermediate The enol arises by Markovnikov hydration of the alkyne Enol formation is followed by rapid isomerization of the enol to a ketone... 

Excluding enantiomers there are three isomeric cyclopropanedicarboxyhc acids Two of them A and B are constitutional isomers of each other and each forms a cyclic anhydnde on being heated The third diacid C does not form a cyclic anhydride C is a constitutional isomer of A and a stereoisomer of B Identify A B and C Construct molecular models of the cyclic anhy dndes formed on heating A and B Why doesn t C form a cyclic anhydride" ... 

The enzyme catalyzed reactions that lead to geraniol and farnesol (as their pyrophosphate esters) are mechanistically related to the acid catalyzed dimerization of alkenes discussed m Section 6 21 The reaction of an allylic pyrophosphate or a carbo cation with a source of rr electrons is a recurring theme m terpene biosynthesis and is invoked to explain the origin of more complicated structural types Consider for exam pie the formation of cyclic monoterpenes Neryl pyrophosphate formed by an enzyme catalyzed isomerization of the E double bond m geranyl pyrophosphate has the proper geometry to form a six membered ring via intramolecular attack of the double bond on the allylic pyrophosphate unit... 

Pubhcations have described the use of HFPO to prepare acyl fluorides (53), fluoroketones (54), fluorinated heterocycles (55), as well as serving as a source of difluorocarbene for the synthesis of numerous cycHc and acycHc compounds (56). The isomerization of HFPO to hexafluoroacetone by hydrogen fluoride has been used as part of a one-pot synthesis of bisphenol AF (57). HFPO has been used as the starting material for the preparation of optically active perfluorinated acids (58). The nmr spectmm of HFPO is given in Reference 59. The molecular stmcture of HFPO has been deterrnined by gas-phase electron diffraction (13). 

Unlike ECF, direct fluorination does not alter the carbon backbone preparation of isomerically pure acids is possible (18). Both direct fluorination and ECF permit a great variety of stmctures to be made, but each method is better at certain types of stmctures than the other. Ether acids are produced in good yields, by direct fluorination (17), while ECF of ether-containing acids is fair to poor depending on the substrate. Despite much industrial interest, the costs and hazards of handling fluorine gas have prevented commercial application of this process. 

Fum ric Acid. Eumaric acid [110-17-8] C H O, is unique in its low solubiUty in cold water and slow rate of solution, making it ideal for use in chilled biscuit leavening systems and for dry pudding mixes and beverage powders. It is also used for gelatin desserts, pie filling, fmit juices, and wine. Eumaric acid is produced by the acid-catalyzed isomerization of maleic acid (8,9) (see Maleic anhydride, maleic acid, and fumaric acid). 

Carbocations generated from alkanes using superacids react with carbon monoxide under mild conditions to form carboxyUc acid (188). In this process isomeric carboxyUc acids are produced as a mixture. However, when the reaction is mn with catalytic amounts of bromine (0.3 mmol eq) in HF-SbF solution, regio-selective carboxylation is obtained. / -Propane was converted almost exclusively to isobutyric acid under these conditions. 

Mote stable catalysts ate obtained by using fluorinated graphite or fluorinated alumina as backbones, and Lewis acid halides, such as SbF, TaF, and NbF, which have a relatively low vapor pressure. These Lewis acids ate attached to the fluorinated soHd supports through fluorine bridging. They show high reactivity in Friedel-Crafts type reactions including the isomerization of straight-chain alkanes such as / -hexane. 

Methyl /-Butyl Ether. MTBE is produced by reaction of isobutene and methanol on acid ion-exchange resins. The supply of isobutene, obtained from hydrocarbon cracking units or by dehydration of tert-huty alcohol, is limited relative to that of methanol. The cost to produce MTBE from by-product isobutene has been estimated to be between 0.13 to 0.16/L ( 0.50—0.60/gal) (90). Direct production of isobutene by dehydrogenation of isobutane or isomerization of mixed butenes are expensive processes that have seen less commercial use in the United States. 

The synthesis of 2,4-dihydroxyacetophenone [89-84-9] (21) by acylation reactions of resorcinol has been extensively studied. The reaction is performed using acetic anhydride (104), acetyl chloride (105), or acetic acid (106). The esterification of resorcinol by acetic anhydride followed by the isomerization of the diacetate intermediate has also been described in the presence of zinc chloride (107). Alkylation of resorcinol can be carried out using ethers (108), olefins (109), or alcohols (110). The catalysts which are generally used include sulfuric acid, phosphoric and polyphosphoric acids, acidic resins, or aluminum and iron derivatives. 2-Chlororesorcinol [6201-65-1] (22) is obtained by a sulfonation—chloration—desulfonation technique (111). 1,2,4-Trihydroxybenzene [533-73-3] (23) is obtained by hydroxylation of resorcinol using hydrogen peroxide (112) or peracids (113). 

Maleic anhydride and the two diacid isomers were first prepared in the 1830s (1) but commercial manufacture did not begin until a century later. In 1933 the National Aniline and Chemical Co., Inc., installed a process for maleic anhydride based on benzene oxidation using a vanadium oxide catalyst (2). Maleic acid was available commercially ia 1928 and fumaric acid production began in 1932 by acid-catalyzed isomerization of maleic acid. 

Maleic and fiimaric acids have physical properties that differ due to the cis and trans configurations about the double bond. Aqueous dissociation constants and solubiUties of the two acids show variations attributable to geometric isomer effects. X-ray diffraction results for maleic acid (16) reveal an intramolecular hydrogen bond that accounts for both the ease of removal of the first carboxyl proton and the smaller dissociation constant for maleic acid compared to fumaric acid. Maleic acid isomerizes to fumaric acid with a derived heat of isomerization of —22.7 kJ/mol (—5.43 kcal/mol) (10). The activation energy for the conversion of maleic to fumaric acid is 66.1 kJ/mol (15.8 kcal/mol) (24). 

Isomerization. Maleic acid is isomerized to fumaric acid by thermal treatment and a variety of catalytic species. Isomerization occurs above the 130 to 140°C melting point range for maleic acid but below 230°C, at which point fumaric acid is dehydrated to maleic anhydride. Derivatives of maleic acid can also be isomerized. Kinetic data are available for both the uncatalyzed (73) and thiourea catalyzed (74) isomerizations of the cis to trans diacids. These data suggest that neither carbonium ion nor succinate intermediates are involved in the isomerization. Rather, conjugate addition imparts sufficient single bond character to afford rotation about the central C—C bond of the diacid (75). 

Although not commercialized, both Elf Atochem and Rn hm GmbH have pubUshed on development of hydrogen fluoride-catalyzed processes. Norsolor, since acquired by Elf Aquitaine, had been granted an exclusive European Hcense for the propylene-hydrogen fluoride technology of Ashland Oil (99). Rn hm has patented a process for the production of isobutyric acid in 98% yield via the isomerization of isopropyl formate in the presence of carbon monoxide and hydrofluoric acid (100). 

---