Information binary

Many well-known models can predict ternary LLE for type-II systems, using parameters estimated from binary data alone. Unfortunately, similar predictions for type-I LLE systems are not nearly as good. In most cases, representation of type-I systems requires that some ternary information be used in determining optimum binary parameter. 

Often the a priori knowledge about the structure of the object under restoration consists of the knowledge that it contains two or more different materials or phases of one material. Then, the problem of phase division having measured data is quite actual. To explain the mathematical formulation of this information let us consider the matrix material with binary structure and consider the following potentials ... 

They then compared measured and predicted fluxes for diffusion experiments in the mixture He-N. The tests covered a range of pressures and a variety of compositions at the pellet faces but, like the model itself, they were confined to binary mixtures and isobaric conditions. Feng and Stewart [49] compared their models with isobaric flux measurements in binary mixtures and with some non-isobaric measurements in mixtures of helium and nitrogen, using data from a variety of sources. Unfortunately the information on experimental conditions provided in their paper is very sparse, so it is difficult to assess how broadly based are the conclusions they reached about the relative merits oi their different models. 

The previous discussion concentrated on arithmetical operations by computing in binary numbers represented as bits and bytes. However, other computer functions also use bytes of information. 

Digital signal. A signal that represents information in a computer-compatible form as a sequence of (binary) numbers that can describe discrete samples of an analog signal. 

In addition, most devices provide operator control of settings for temperature and/or response slope, isopotential point, zero or standardization, and function (pH, mV, or monovalent—bivalent cation—anion). Microprocessors are incorporated in advanced-design meters to faciHtate caHbration, calculation of measurement parameters, and automatic temperature compensation. Furthermore, pH meters are provided with output connectors for continuous readout via a strip-chart recorder and often with binary-coded decimal output for computer interconnections or connection to a printer. Although the accuracy of the measurement is not increased by the use of a recorder, the readabiHty of the displayed pH (on analogue models) can be expanded, and recording provides a permanent record and also information on response and equiHbrium times during measurement (5). 

Both UNIFAC and ASOG are typically generalized to multicomponent systems in commercial software packages. An important feature of these methods is that only binary interaction information is used to generate multicomponent predictions. 

A.ssessmentofUNIFy C. UNIFAC is a method to predict the activity of binary Hquid solutions in the absence of all data except stmctural information. Because state-of-the-art real fluid estimation methods are empirical or semi-empirical, the use of more data results in improved activity estimation. 

The use of UNIFAC for estimating activity coefficients in binary and multicomponent organic and organic—water systems is recommended for those systems composed of nonelectrolyte, nonpolymer substances for which only stmctural information is known. UNIFAC is not recommended for systems for which some reUable experimental data are available. The method, including revisions through 1987 (39), is available in commercial software packages such as AspenPlus (174). 

In secondary ion mass spectrometry (SIMS), a beam of energetic primary ions is focused onto the surface of a solid. Some of the ions are reflected but most of the energy of the primary ions is dissipated in the surface by binary collisions that cause neutrals, excited neutrals, and ions (positive and negative) to be ejected or sputtered from the surface. The secondary ions can be analyzed by a mass spectrometer to provide information about the surface composition of the solid. 

The design of a distillation column is based on information derived from the VLE diagram describing the mixtures to be separated. The vapor-liquid equilibrium characteristics are indicated by the characteristic shapes of the equilibrium curves. This is what determines the number of stages, and hence the number of trays needed for a separation. Although column designs are often proprietary, the classical method of McCabe-Thiele for binary columns is instructive on the principles of design. 

The development of the HRA event tree is one of the most critical parts of the quantification of human error probabilities. If the task analysis lists the possible human error events in the order of ihcir potential occurrence, the transfer of this information to the HRA event tree is fadlitutcd. Each potential eiTor and success is represented as a binary branch on the HRA event tiec. with subsequent errors and successes following directly from the immediately preceding ones. Cure should be taken not to omit the errors that are not included in the task analysis table but might affect the probabilities listed in the table. For example, administrative control errors that affect a task being performed may not appear in the task analysis table but must be included in the HRA event tree. 

Dielectric relaxation measurements of polyethylene grafted with acrylic acid(AA), 2-hydroxyethyl methacrylate (HEMA) and their binary mixture were carried out in a trial to explore the molecular dynamics of the grafted samples [125]. Such measurements provide information about their molecular packing and interaction. It was possible to predict that the binary mixture used yields a random copolymer PE—g—P(AA/HEMA), which is greatly enriched with HEMA. This method of characterization is very interesting and is going to be developed in different polymer/monomer systems. 

Systems may also include modems, which connect small computers or terminals to other computers or workstations either in-house or over telephone system lines and whose speed of transmission is rated by baud (for binary information units, the number of bits transmitted per second). Common baud rates for small systems are 2400 or 9600 with higher rates possible. Computers may also be networked together to share data or peripheral components such as highspeed printers. 

Coding and Decoding. Ten-bit binary codes are used to transmit the information in most techniques. In one technique, the maximum reading to be transmitted is divided ten times. In a word, each bit has the value corresponding to its rank. 

During recent years a considerable amount of information has been published on the anodic behaviour of nickel alloys. The data include studies both of binary alloy systems in which nickel forms the major alloying component and of more complex commercially produced nickel alloys. The data are sufficiently numerous to permit a rational and fairly complete interpretation of many of the corrosion-resistant properties of nickel alloys on the basis of their anodic behaviour. 

---