Hydroperoxides esters

The first practical method for asymmetric epoxidation of primary and secondary allylic alcohols was developed by K.B. Sharpless in 1980 (T. Katsuki, 1980 K.B. Sharpless, 1983 A, B, 1986 see also D. Hoppe, 1982). Tartaric esters, e.g., DET and DIPT" ( = diethyl and diisopropyl ( + )- or (— )-tartrates), are applied as chiral auxiliaries, titanium tetrakis(2-pro-panolate) as a catalyst and tert-butyl hydroperoxide (= TBHP, Bu OOH) as the oxidant. If the reaction mixture is kept absolutely dry, catalytic amounts of the dialkyl tartrate-titanium(IV) complex are suflicient, which largely facilitates work-up procedures (Y. Gao, 1987). Depending on the tartrate enantiomer used, either one of the 2,3-epoxy alcohols may be obtained with high enantioselectivity. The titanium probably binds to the diol grouping of one tartrate molecule and to the hydroxy groups of the bulky hydroperoxide and of the allylic alcohol... 

Osmate esters are fairly stable but are readily cleaved m the presence of an 0x1 dizing agent such as tert butyl hydroperoxide... 

SULFURIC AND SULFUROUS ESTERS] (Vol 23) m/p-Isopropyl-a-cumyl hydroperoxide [98-49-7]... 

Earlier reports have indicated that esters can form before significant amounts of acids accumulate (16). The Bayer-ViUiger oxidations of ketones with intermediate hydroperoxides and/or peracids have been suggested as ester forming mechanisms (34,56). However, the reactions of simple aUphatic ketones with peracetic acid are probably too slow to support this mechanism (57,58). Very early proposals for ester formation, although imaginative, appear improbable (59). 

Chromium compounds decompose primary and secondary hydroperoxides to the corresponding carbonyl compounds, both homogeneously and heterogeneously (187—191). The mechanism of chromium catalyst interaction with hydroperoxides may involve generation of hexavalent chromium in the form of an alkyl chromate, which decomposes heterolyticaHy to give ketone (192). The oxidation of alcohol intermediates may also proceed through chromate ester intermediates (193). Therefore, chromium catalysis tends to increase the ketone alcohol ratio in the product (194,195). 

Derivative Formation. Hydrogen peroxide is an important reagent in the manufacture of organic peroxides, including tert-huty hydroperoxide, benzoyl peroxide, peroxyacetic acid, esters such as tert-huty peroxyacetate, and ketone derivatives such as methyl ethyl ketone peroxide. These are used as polymerization catalysts, cross-linking agents, and oxidants (see Peroxides and peroxide compounds). 

The reaction of a hydroperoxide with 2-methylaziridine [75-55-8] has been described (94). The reaction of ethyleneknine with phenols (95) and carboxyHc acids (96,97) produces ethylamine ethers and esters, respectively. However, these reactions frequentiy yield product mixtures which contain polyaminoalkylated oxygen nucleophiles and polymers, in addition to the desked products (1). The selectivity of the reaction can often be improved by using less than the stoichiometric amount of the aziridine component (98,99). 

Chemical Properties. Alkyl peroxyesters are hydroly2ed more readily than the analogous nonperoxidic esters and yield the original acids and hydroperoxides from which they were prepared rather than alcohols and peroxyacids ... 

Another important use of a-pinene is the hydrogenation to i j -pinane (21). One use of the i j -pinane is based on oxidation to cis- and /n j -pinane hydroperoxide and their subsequent catalytic reduction to cis- and /n j -pinanol (22 and 23) in about an 80 20 ratio (53,54). Pyrolysis of the i j -pinanol is an important route to linalool overall the yield of linalool (3) from a-pinene is about 30%. Linalool can be readily isomerized to nerol and geraniol using an ortho vanadate catalyst (55). Because the isomerization is an equiUbrium process, use of borate esters in the process improves the yield of nerol and geraniol to as high as 90% (56). 

Divalent Sulfur Derivatives. A diaLkyl ester of thiodipropionic acid (16) is capable of decomposing at least 20 moles of hydroperoxide (17). Some of the reactions contributing to the antioxidant activity of these compounds are shown in Figure 3. 

When heated in the presence of a carboxyHc acid, cinnamyl alcohol is converted to the corresponding ester. Oxidation to cinnamaldehyde is readily accompHshed under Oppenauer conditions with furfural as a hydrogen acceptor in the presence of aluminum isopropoxide (44). Cinnamic acid is produced directly with strong oxidants such as chromic acid and nickel peroxide. The use of t-butyl hydroperoxide with vanadium pentoxide catalysis offers a selective method for epoxidation of the olefinic double bond of cinnamyl alcohol (45). 

Treatment of 2-methylthiirane with t-butyl hydroperoxide at 150 °C in a sealed vessel gave very low yields of allyl disulfide, 2-propenethiol and thioacetone. The allyl derivatives may be derived from abstraction of a hydrogen atom from the methyl group followed by ring opening to the allylthio radical. Percarbonate derivatives of 2-hydroxymethylthiirane decompose via a free radical pathway to tar. Acrylate esters of 2-hydroxymethylthiirane undergo free radical polymerization through the double bond. 

Another method for slowing oxidation of rubber adhesives is to add a compound which destroys the hydroperoxides formed in step 3, before they can decompose into radicals and start the degradation of new polymer chains. These materials are called hydroperoxide decomposers, preventive antioxidants or secondary antioxidants. Phosphites (phosphite esters, organophosphite chelators, dibasic lead phosphite) and sulphides (i.e. thiopropionate esters, metal dithiolates) are typical secondary antioxidants. Phosphite esters decompose hydroperoxides to yield phosphates and alcohols. Sulphur compounds, however, decompose hydroperoxides catalytically. 

As electrophilic substitutes for peracids, the use of borate ester induced decomposition of alkyl hydroperoxides and molybdenum VI peroxy-complexes have been reported in the recent literature. Although these reagents have led to the epoxidation of olefins in greater than 90% yield there are no reports yet of their application to steroid olefins. 

Aromatic aldehydes and cyclic perfluoroketones are oxidized to a-hydroxy hydroperoxides or bis(a-hydroxy) peroxides, aliphatic ketones are converted to esters, and ketenes are converted to a-lactones... 

The early work of Kennerly and Patterson [16] on catalytic decomposition of hydroperoxides by sulphur-containing compounds formed the basis of the preventive (P) mechanism that complements the chain breaking (CB) process. Preventive antioxidants (sometimes referred to as secondary antioxidants), however, interrupt the second oxidative cycle by preventing or inhibiting the generation of free radicals [17]. The most important preventive mechanism is the nonradical hydroperoxide decomposition, PD. Phosphite esters and sulphur-containing compounds, e.g., AO 13-18, Table la are the most important classes of peroxide decomposers. 

Sulphur compounds, e.g., thiopropionate esters and metal dithiolates (Table la, AO 16 and 17), decompose hydroperoxides catalytically, i.e., one antioxidant molecule destroys several hydroperoxides through the intermediacy of sulphur acids [19,20]. Scheme 6 shows a simplified scheme for the antioxidant mechanism of simple alkyl sulphides. 

When the related saccharin derived sultam (R)-29 is converted into the (Z)-boron enolate and subsequently treated with aldehydes,. vy -diastereomers 30 result almost exclusively. Thus, the diasteromeric ratios, defined as the ratio of the major product to the sum of all other stereoisomers, surpass 99 1. Hydroperoxide assisted saponification followed by esterification provides carboxylic esters 31 with recovery of sultam 32106a. 

Hydroperoxides Organomineral Hydroperoxides a-Oxy and a-Peroxy-Hydroperoxides and Peroxides Ozonides Peroxides Peroxy Acids Diacyl Peroxides Peroxy Esters and Poly Peroxides... 

Hydroperoxides, as optically active oxidizing agents 289-291 Hydrosulphonylation 172 /J-Hydroxyacids 619 a-Hydroxyaldehydes, synthesis of 330 a-Hydroxyalkyl acrylates, chiral 329 j -Hydroxycarboxylic esters, chiral 329 3-Hydroxycycloalkenes, synthesis of 313 Hydroxycyclopentenones, synthesis of 310 -Hydroxyesters 619 synthesis of 616 Hydroxyketones 619, 636 Hydroxymethylation 767 a-Hydroxysulphones, synthesis of 176 / -Hydroxysulphones 638, 639 reactions of 637, 944 electrochemical 1036 synthesis of 636 y-Hydroxysulphones 627 synthesis of 783... 

Many impurities are present in commercial caprolactam which pass into the liquid wastes from PCA manufacture from which caprolactam monomer may be recovered. Also, the products of die thermal degradation of PCA, dyes, lubricants, and other PCA fillers may be contained in the regenerated CL. Identification of die contaminants by IR spectroscopy has led to the detection of lower carboxylic acids, secondary amines, ketones, and esters. Aldehydes and hydroperoxides have been identified by polarography and thin-layer chromatography. 

---