Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Hydrogen sulfide azides

A. The mechanism of azide toxicity is unclear. Like cyanide and hydrogen sulfide, azide inhibits iron-containing respiratory enzymes such as cytochrome oxidase, resulting In cellular asphyxiation. Azide is also a potent, direct-acting vasodilator. [Pg.122]

Manganese dioxide Aluminum, hydrogen sulfide, oxidants, potassium azide, hydrogen peroxide, peroxosulfuric acid, sodium peroxide... [Pg.1209]

The decomposition of (536) with hydrogen sulfide yields pyrazole (76T1909). The 1-phosphorylpyrazoles (537) are suitable reagents for the phosphorylation of alcohols, amines, hydrazines and azides (76AG(E)378). [Pg.271]

Corrosion products and deposits. All sulfate reducers produce metal sulfides as corrosion products. Sulfide usually lines pits or is entrapped in material just above the pit surface. When freshly corroded surfaces are exposed to hydrochloric acid, the rotten-egg odor of hydrogen sulfide is easily detected. Rapid, spontaneous decomposition of metal sulfides occurs after sample removal, as water vapor in the air adsorbs onto metal surfaces and reacts with the metal sulfide. The metal sulfides are slowly converted to hydrogen sulfide gas, eventually removing all traces of sulfide (Fig. 6.11). Therefore, only freshly corroded surfaces contain appreciable sulfide. More sensitive spot tests using sodium azide are often successful at detecting metal sulfides at very low concentrations on surfaces. [Pg.134]

It is interesting to note that Kulstad and Malmsten have utilized yet another method for introducing nitrogen into the crown precursors. They utilize sodium azide in DMSO to displace halogen from triethylene glycol dichloride. The bis-azide is then reduced using hydrogen sulfide in ethanol. ... [Pg.161]

Nucleophiles like alcohols [2, S], hydrogen sulfide [2], thiols [2,10], ammonia, amines, hydrazines, hydroxylamines [2 11, 12, 13, 14, 75], azides [2], other pseudohalides [2], phosphonates [2,16,17,18,19, 20], and phosphanes [2,19] add rapidly across the CO or CN double bond to yield stable adducts The phosphonate adduets undergo a subsequent aleohol—lester rearrangement [19, 20] (equation 2)... [Pg.841]

Early efforts to effect the photoinduced ring expansion of aryl azides to 3H-azepines in the presence of other nucleophiles met with only limited success. For example, irradiation of phenyl azide in hydrogen sulfide-diethyl ether, or in methanol, gave 17/-azepine-2(3//)-thione35 (5% mp 106—107 " O and 2-methoxy-3//-azepine (11 %),2 3 respectively. Later workers194 failed to reproduce this latter result, but found that in strongly basic media (3 M potassium hydroxide in methanol/dioxane) and in the presence of 18-crown-6, 17/-azepin-2(3//)-one was produced in 48% yield. In the absence of the crown ether the yield of azepinone falls to 35%. [Pg.153]

Attempts to effect ring expansion of methyl 2-azidobenzoate in the presence of other nucleophiles have failed. Thus, photolysis in tetrahydrofuran solution saturated with hydrogen sulfide, or with ammonia, produced methyl 2-aminobenzoate in 54 and 37 % yield, respectively, as the sole identifiable product.197 Photolysis of phenyl azide in ethanolic phenol gave 2-phenoxy-3//-azepine in poor yield (8 %).203,204 2-Mesityl-3//-azepine (10 %) is the surprising, and only tentatively explained, product from the photolysis of phenyl azide in mcsitylene in the presence of trifluoroacetic acid.179... [Pg.155]

Puacz et al. (1995) developed a catalytic method, based on the iodine-azide reaction, for the determination of hydrogen sulfide in human whole blood. The method involves the generation of hydrogen sulfide in an evolution-absorption apparatus. In addition, the method allows for the determination of sulfide in blood without interference from other sulfur compounds in blood. A detection limit of 4 g/dm3 and a percent recovery of 98-102% were achieved. Although the accuracy and precision of the catalytic method are comparable to those of the ion-selective electrode method, the catalytic method is simpler, faster, and would be advantageous in serial analysis. [Pg.152]

Anon., Lab. Accid. Higher Educ. Item 32, HSE, Barking, 1987 During the reduction of the azide in ethanol with hydrogen sulfide (no regulation other than main cylinder valve) under reflux (with insufficient flow of condenser water), the mixture apparently overheated, then exploded violently. [Pg.816]

Cobalt Copper Acetylene, hydrazinium nitrate, oxidants Acetylene and alkynes, ammonium nitrate, azides, bromates, chlorates, iodates, chlorine, ethylene oxide, fluorine, peroxides, hydrogen sulfide, hydrazinium nitrate... [Pg.1476]

Lead(II) azide Lead chromate Lead dioxide Calcium stearate, copper, zinc, brass, carbon disulfide Iron hexacyanoferrate(4-) Aluminum carbide, hydrogen peroxide, hydrogen sulfide, hydroxylamine, ni-troalkanes, nitrogen compounds, nonmetal halides, peroxoformic acid, phosphorus, phosphorus trichloride, potassium, sulfur, sulfur dioxide, sulfides,... [Pg.1478]

Lithium aluminum hydride reduced )J-azidoethylbenzene to j8-aminoethyl-benzene in 89% yield [600], The azido group was also reduced with aluminum amalgam (yields 71-86%) [149], with titanium trichloride (yields 54-83%) [601], with vanadous chloride (yields 70-95%) [217] Procedure 40, p. 215), with hydrogen sulfide (yield 90%) [247], with sodium hydrosulfite (yield 90%) [259], with hydrogen bromide in acetic acid (yields 84-97%) [232], and with 1,3-propanedithiol (yields 84-100%) [602]. Unsaturated azides were reduced to unsaturated amines with aluminum amalgam [149] and with 1,3-propane-dithiol [602]. [Pg.76]

Aluminum powder, Carbon tetrachloride Aluminum powder, Tetrachlorethylene CNTA, Hydrogen sulfide. Benzene, Lead 11 hydroxide Mercury-ll-nitrate, Sodium azide Mercury, Nitric acid. Alcohol Mercury, Nitric acid. Ethanol Ammonia, Mercury oxide. Nitric acid Nitric acid. Methylene diformamide. Acetic anhydride. Formic acid. Benzene... [Pg.144]

Ligands that can coordinate to an active center in an enzyme and prevent coordination by the substrate will tend to inhibit the action of that enzyme. 1 We have seen that azide can occupy the pocket tailored to fit the carbon dioxide molecule. This prevents the latter from approaching the active site. Furthermore, the infrared evidence indicates that the azide ion actually does bind the zinc atom The asymmetric stretching mode of the azide ion is strongly shifted with respect to the free ion absorption. Thus the zinc is inhibited from acting as a Lewis acid towards water with the formation of a coordinated hydroxide ion. Other inhibitors also bind to the metal atom. As little as 4 x I0-6 M cyanide or hydrogen sulfide inhibits the enzymatic activity by 85%. [Pg.998]

After glycosylation with sphingosine the azide group is reduced to an amine. Hydrogen sulfide in pyridine / water hereby acts as reducing reagent. Next stearic acid (75) has to be connected to the amine - a peptide bond is formed. [Pg.262]


See other pages where Hydrogen sulfide azides is mentioned: [Pg.238]    [Pg.238]    [Pg.283]    [Pg.276]    [Pg.178]    [Pg.55]    [Pg.409]    [Pg.433]    [Pg.158]    [Pg.184]    [Pg.111]    [Pg.321]    [Pg.535]    [Pg.1035]    [Pg.535]    [Pg.388]    [Pg.176]    [Pg.83]    [Pg.223]    [Pg.158]    [Pg.184]    [Pg.1035]    [Pg.809]    [Pg.3733]    [Pg.367]    [Pg.859]   
See also in sourсe #XX -- [ Pg.76 , Pg.183 ]




SEARCH



Hydrogen azide

Hydrogen sulfide nitro azides

© 2024 chempedia.info