Cobalt hydroformylation

Hydroformylation. Cobalt catalysts are commonly used in industry for this reaction, but rhodium catalysts are more active and more selective. Other less accessible rhodium catalysts have been found to be effective Rh4(CO)i2 and HRh(CO)[P(CsH5)3]3. ... 

An early attempt to hydroformylate butenediol using a cobalt carbonyl catalyst gave tetrahydro-2-furanmethanol (95), presumably by aHybc rearrangement to 3-butene-l,2-diol before hydroformylation. Later, hydroformylation of butenediol diacetate with a rhodium complex as catalyst gave the acetate of 3-formyl-3-buten-l-ol (96). Hydrogenation in such a system gave 2-methyl-1,4-butanediol (97). 

Rhodium Ca.ta.lysts. Rhodium carbonyl catalysts for olefin hydroformylation are more active than cobalt carbonyls and can be appHed at lower temperatures and pressures (14). Rhodium hydrocarbonyl [75506-18-2] HRh(CO)4, results in lower -butyraldehyde [123-72-8] to isobutyraldehyde [78-84-2] ratios from propylene [115-07-17, C H, than does cobalt hydrocarbonyl, ie, 50/50 vs 80/20. Ligand-modified rhodium catalysts, HRh(CO)2L2 or HRh(CO)L2, afford /iso-ratios as high as 92/8 the ligand is generally a tertiary phosphine. The rhodium catalyst process was developed joindy by Union Carbide Chemicals, Johnson-Matthey, and Davy Powergas and has been Hcensed to several companies. It is particulady suited to propylene conversion to -butyraldehyde for 2-ethylhexanol production in that by-product isobutyraldehyde is minimized. 

Often the aldehyde is hydrogenated to the corresponding alcohol. In general, addition of carbon monoxide to a substrate is referred to as carbonylation, but when the substrate is an olefin it is also known as hydroformylation. The eady work on the 0x0 synthesis was done with cobalt hydrocarbonyl complexes, but in 1976 a low pressure rhodium-cataly2ed process was commerciali2ed that gave greater selectivity to linear aldehydes and fewer coproducts. 

Hydroformylation. Esters of maleate and fumarate are treated with carbon monoxide and hydrogen in the presence of appropriate catalysts to give formyl derivatives. Dimethyl fumarate [624-49-7] is hydroformylated in 1 1 CO/H2 at 100°C and 11.6 MPa pressure with a cobalt [7440-48-4] catalyst to give an 83% yield of dimethyl formylsuccinate [58026-12-3] product (72). 

MMA and MAA can be produced from ethylene [74-85-1/ as a feedstock via propanol, propionic acid, or methyl propionate as intermediates. Propanal may be prepared by hydroformylation of ethylene over cobalt or rhodium catalysts. The propanal then reacts in the Hquid phase with formaldehyde in the... 

Linear terminal olefins are the most reactive in conventional cobalt hydroformylation. Linear internal olefins react at less than one-third that rate. A single methyl branch at the olefinic carbon of a terminal olefin reduces its reaction rate by a factor of 10 (2). For rhodium hydroformylation, linear a-olefins are again the most reactive. For example, 1-butene is about 20—40 times as reactive as the 2-butenes (3) and about 100 times as reactive as isobutylene. 

The mechanism of the cobalt-cataly2ed oxo reaction has been studied extensively. The formation of a new C—C bond by the hydroformylation reaction proceeds through an organometaUic intermediate formed from cobalt hydrocarbonyl which is regenerated in the aldehyde-forrning stage. The mechanism (5,6) for the formation of propionaldehyde [123-38-6] from ethylene is illustrated in Figure 1. 

The commercially important normal to branched aldehyde isomer ratio is critically dependent on CO partial pressure which, in propylene hydroformylation, determines the rate of interconversion of the -butyryl and isobutyryl cobalt tetracarbonyl intermediates (11). 

In contrast to triphenylphosphine-modified rhodium catalysis, a high aldehyde product isomer ratio via cobalt-catalyzed hydroformylation requires high CO partial pressures, eg, 9 MPa (1305 psi) and 110°C. Under such conditions alkyl isomerization is almost completely suppressed, and the 4.4 1 isomer ratio reflects the precursor mixture which contains principally the kinetically favored -butyryl to isobutyryl cobalt tetracarbonyl. At lower CO partial pressures, eg, 0.25 MPa (36.25 psi) and 110°C, the rate of isomerization of the -butyryl cobalt intermediate is competitive with butyryl reductive elimination to aldehyde. The product n/iso ratio of 1.6 1 obtained under these conditions reflects the equihbrium isomer ratio of the precursor butyryl cobalt tetracarbonyls (11). 

Ruthenium. Ruthenium, as a hydroformylation catalyst (14), has an activity signiftcandy lower than that of rhodium and even cobalt (22). Monomeric mthenium carbonyl triphenylphosphine species (23) yield only modest normal to branched regioselectivities under relatively forcing conditions. For example, after 22 hours at 120°C, 10 MPa (1450 psi) of carbon monoxide and hydrogen, biscarbonyltristriphenylphosphine mthenium [61647-76-5] ... 

Prior to 1975, reaction of mixed butenes with syn gas required high temperatures (160—180°C) and high pressures 20—40 MPa (3000—6000 psi), in the presence of a cobalt catalyst system, to produce / -valeraldehyde and 2-methylbutyraldehyde. Even after commercialization of the low pressure 0x0 process in 1975, a practical process was not available for amyl alcohols because of low hydroformylation rates of internal bonds of isomeric butenes (91,94). More recent developments in catalysts have made low pressure 0x0 process technology commercially viable for production of low cost / -valeraldehyde, 2-methylbutyraldehyde, and isovaleraldehyde, and the corresponding alcohols in pure form. The producers are Union Carbide Chemicals and Plastic Company Inc., BASF, Hoechst AG, and BP Chemicals. 

Propane, 1-propanol, and heavy ends (the last are made by aldol condensation) are minor by-products of the hydroformylation step. A number of transition-metal carbonyls (qv), eg, Co, Fe, Ni, Rh, and Ir, have been used to cataly2e the oxo reaction, but cobalt and rhodium are the only economically practical choices. In the United States, Texas Eastman, Union Carbide, and Hoechst Celanese make 1-propanol by oxo technology (11). Texas Eastman, which had used conventional cobalt oxo technology with an HCo(CO)4 catalyst, switched to a phosphine-modified Rh catalyst ia 1989 (11) (see Oxo process). In Europe, 1-propanol is made by Hoechst AG and BASE AG (12). 

The switch from the conventional cobalt complex catalyst to a new rhodium-based catalyst represents a technical advance for producing aldehydes by olefin hydroformylation with CO, ie, by the oxo process (qv) (82). A 200 t/yr CSTR pilot plant provided scale-up data for the first industrial,... 

Primary Amyl Alcohols. Primary amyl alcohols (qv) are manufactured by hydroformylation of mixed butenes, followed by dehydrogenation (114). Both 1-butene and 2-butene yield the same product though in slightly different ratios depending on the catalyst and conditions. Some catalyst and conditions produce the alcohols in a single step. By modifying the catalyst, typically a cobalt carbonyl, with phosphoms derivatives, such as tri( -butyl)phosphine, the linear alcohol can be the principal product from 1-butene. 

With Unsaturated Compounds. The reaction of unsaturated organic compounds with carbon monoxide and molecules containing an active hydrogen atom leads to a variety of interesting organic products. The hydroformylation reaction is the most important member of this class of reactions. When the hydroformylation reaction of ethylene takes place in an aqueous medium, diethyl ketone [96-22-0] is obtained as the principal product instead of propionaldehyde [123-38-6] (59). Ethylene, carbon monoxide, and water also yield propionic acid [79-09-4] under mild conditions (448—468 K and 3—7 MPa or 30—70 atm) using cobalt or rhodium catalysts containing bromide or iodide (60,61). 

The breadth of reactions catalyzed by cobalt compounds is large. Some types of reactions are hydrotreating petroleum (qv), hydrogenation, dehydrogenation, hydrodenitrification, hydrodesulfurization, selective oxidations, ammonoxidations, complete oxidations, hydroformylations, polymerizations, selective decompositions, ammonia (qv) synthesis, and fluorocarbon synthesis (see Fluorine compounds, organic). 

There are currentiy no commercial producers of C-19 dicarboxyhc acids. During the 1970s BASF and Union Camp Corporation offered developmental products, but they were never commercialized (78). The Northern Regional Research Laboratory (NRRL) carried out extensive studies on preparing C-19 dicarboxyhc acids via hydroformylation using both cobalt catalyst and rhodium complexes as catalysts (78). In addition, the NRRL developed a simplified method to prepare 9-(10)-carboxystearic acid in high yields using a palladium catalyst (79). 

C-19 dicarboxyhc acid can be made from oleic acid or derivatives and carbon monoxide by hydroformylation, hydrocarboxylation, or carbonylation. In hydroformylation, ie, the Oxo reaction or Roelen reaction, the catalyst is usually cobalt carbonyl or a rhodium complex (see Oxo process). When using a cobalt catalyst a mixture of isomeric C-19 compounds results due to isomerization of the double bond prior to carbon monoxide addition (80). 

The nickel or cobalt catalyst causes isomerization of the double bond resulting in a mixture of C-19 isomers. The palladium complex catalyst produces only the 9-(10)-carboxystearic acid. The advantage of the hydrocarboxylation over the hydroformylation reaction is it produces the carboxyUc acids in a single step and obviates the oxidation of the aldehydes produced by hydroformylation. 

Hydroformylation. In hydroformylation, the 0x0 reaction, ethylene reacts with synthesis gas (CO + H2) over a cobalt catalyst at 60—200°C... 

Most ring syntheses of this type are of modern origin. The cobalt or rhodium carbonyl catalyzed hydrocarboxylation of unsaturated alcohols, amines or amides provides access to tetrahydrofuranones, pyrrolidones or succinimides, although appreciable amounts of the corresponding six-membered heterocycle may also be formed (Scheme 55a) (73JOM(47)28l). Hydrocarboxylation of 4-pentyn-2-ol with nickel carbonyl yields 3-methylenetetrahy-drofuranone (Scheme 55b). Carbonylation of Schiff bases yields 2-arylphthalimidines (Scheme 55c). The hydroformylation of o-nitrostyrene, subsequent reduction of the nitro group and cyclization leads to the formation of skatole (Scheme 55d) (81CC82). 

Remarkably few examples of this type of ring construction are available. The cobalt carbonyl hydride catalyzed hydroformylation of A/,A/ -diallylcarbamates has provided 3-pyrrolidinones (Scheme 61a) (81JOC4433). The pyrrole synthesis shown in Scheme 61b depends on Michael addition of ethyl a-lithioisocyanoacetate to ethyl a-isocyanocrotonate (77LA1174). 

Hydroformylation, or the 0X0 process, is the reaction of olefins with CO and H9 to make aldehydes, which may subsequently be converted to higher alcohols. The catalyst base is cobalt naph-thenate, which transforms to cobalt hydrocarbonyl in place. A rhodium complex that is more stable and mnctions at a lower temperature is also used. 

In addition to rhodium(III) oxide, cobalt(II) acetylacetonate or dicobalt octacarbonyl has been used by the submitters as catalyst precursors for the hydroformylation of cyclohexene. The results are given in Table I. 

---