High definition

PR = perpendicular recording LR = longitudinal recording HFRH = high frequency recording heads RH/HDTV = recording heads for high definition television and Pa = perpendicular perpendicular anisotropy. 

The entire CRT industry is based on the quality and reproducibility of the phosphors used. As stated earlier the phosphors used for the different kinds of CRT displays are constantly being researched and improved. For high-definition television screens the phosphors must be prepared with great control over powder morphology and particle size (see Section 9.15.4.2.1). 

The lesson I learned from all this was that we shouldn t outright believe anything put in front of us, even if it is on semi-glossy paper or in high-definition video or Flash HTML format. As engineers, we need to put pen to paper, and at least do a sanity check. And lest it be misunderstood, don t forget to do the same for this book too. 

Resolution (the ability to see fine details) User must determine the amount of resolution required depending on the level of detail required for threat determination. A high definition focus with a wide field of vision will give an optimal viewing area. 

Figure 14 The CX3800M, a 3 MeV mobile cargo scanner. With the ability to penetrate over 25 cm of steel, this truck is used to X-ray other vehicles, pallets, and containers. The resulting high-definition image can be compared against the archived cargo manifest.

E.N. Lewis, RJ. Treado, R.C. Reeder, G.M. Story, A.E. Dowrey, C. Marcott and I.W. Levin, Fourier transform step-scan imaging interferometry high-definition chemical imaging in the infrared spectral region. Anal. Ghent., 67, 3377-3381 (1995). 

Injection molding requires the barrel temperature to be about 350°C with a barrel pressure in excess of 138 MPa. The mold is maintained at 110°C to ensure uniform flow and high definition, and to discourage an uneven index of refraction, birefringence. The CD is about four one-hundredths of an inch (0.5 mm) thick. For prerecorded CDs, the PC is compression-molded on a stamper imprinted with the recorder information. This takes about 4 sec. Once the clear piece of polycarbonate is formed, a thin, reflective aluminum layer is sputtered onto the disc. Then, a thin acrylic layer is sprayed over the aluminum to protect it. The label is then printed onto the acrylic surface and the CD is complete. This process is described later in greater detail. 

Zeolitic materials have been prominent amongst those so far studied by high resolution powder diffraction using synchrotron X-rays [36]. High definition synchrotron PXD data has been helpful in a number of framework structure determinations and has facilitated studies of planar faulting (see below). Successful Rietveld refinements of the framework structures of zeolite ZSM-11 [37, 38] and silica-ZSM-12 [39], and of the complete structures of zeolite Y containing cadmium sulfide [40] and cadmium selenide [41] clusters have been described. 

Solid strong incompressible definite shape high definite... 

High-definition process printing better dot structure, lower dot gains... 

To show real-world high-technology examples of pharmaceutical product, process, manufacturing, assembly, and packaging system designs, in action, something we cannot do in static, printed books, we have created a supplementary video, in high definition, and compressed onto a DVD. This professionally edited DVD supports... 

Lewis, E.N. Treado, P.J. Reeder, R.C. Story, G.M. Dowrey, A.E. Marcott, C. 8c Levin, I.W., Fourier Transform Step-Scan Imaging Interferometry High-Definition Chemical Imaging in the Infrared Spectral Region Anal. Chem. 1995, 67, 3377-3381. 

A negative photoresist, SU-8 (Microchem), was used in the microreactor mold process for preparing the PDSM-E microreactors. When exposed to ultraviolet light, material may be removed via a wet etching process leaving high-definition features in micrometer dimensions. Additionally, a microreactor has been constructed in silicon onto which layer-bylayer self-assembled polyelectrolytes and enzymes are deposited. This system is being used for comparison with the PDMS-E system performance. 

The combination of PDMS and urease enzyme to form a microreactor from the resulting "bioplastic" material (PDMS-E) has been reported previously (7). When enzyme concentrations were maintained at 2.5% (w/w) or less, the resulting microreactor cured with good structural integrity and high definition (e.g., well-formed microchannels and >90% retention of triangular transverse packing features in the microchannels). 

Slow, thin emulsion films, such as Kodak Technical Pan or Ilford Pan-F, developed in high-definition developers such as Windisch Extreme Compensating Developer or POTA, will produce negatives, even from 35 mm, of extremely high acutance with the ability to enlarge to mural size. The trade-off is an extremely low EL... 

---