Halide chloride ions

Iron(III) chloride forms numerous addition compounds, especially with organic molecules which contain donor atoms, for example ethers, alcohols, aldehydes, ketones and amines. Anhydrous iron(III) chloride is soluble in, for example, ether, and can be extracted into this solvent from water the extraction is more effective in presence of chloride ion. Of other iron(III) halides, iron(III) bromide and iron(III) iodide decompose rather readily into the +2 halide and halogen. 

Cobalt II) halides can be obtained by direct combination of the elements, or by dehydration of their hydrates. Anhydrous cobalt(II) chloride is blue, and the solid contains octahedrally-coordinated cobalt the hydrated salt C0CI2. bHjO is pink, with each cobalt surrounded by four water molecules and two chloride ions in a distorted octahedron. 

Zincill) chloride. ZnCl2, is the only important halide—it is prepared by standard methods, but cannot be obtained directly by heating the hydrated salt. It has a crystal lattice in which each zinc is surrounded tetrahedrally by four chloride ions, but the low melting point and solubility in organic solvents indicate some covalent... 

Silver Chloride. Silver chloride, AgCl, is a white precipitate that forms when chloride ion is added to a silver nitrate solution. The order of solubility of the three silver halides is Cl" > Br" > I. Because of the formation of complexes, silver chloride is soluble in solutions containing excess chloride and in solutions of cyanide, thiosulfate, and ammonia. Silver chloride is insoluble in nitric and dilute sulfuric acid. Treatment with concentrated sulfuric acid gives silver sulfate. 

Chloride ions are comparatively weak nucleophiles and do not react with azoles. In general, there is also no interaction of halide ions with azolium compounds. 

The acid-catalyzed additions of bromide and chloride ion to thiiranes occurs readily, with halide preferentially but not exclusively attacking the most substituted carbon atom of the thiirane. The reaction of 1-substituted thiiranes with acetyl chloride shows a slight preference for halide attack at the less substituted carbon atom (80MI50601). For further discussion of electrophilic catalysis of halide ion attack see Section 5.06.3.3.2. The reaction of halogens with thiiranes involves electrophilic attack on sulfur (Section 5.06.3.3.6) followed by nucleophilic attack of halide ion on carbon. 

Halide ions may attack 5-substituted thiiranium ions at three sites the sulfur atom (Section 5.06.3.4.5), a ring carbon atom or an 5-alkyl carbon atom. In the highly sterically hindered salt (46) attack occurs only on sulfur (Scheme 62) or the S-methyl group (Scheme 89). The demethylation of (46) by bromide and chloride ion is the only example of attack on the carbon atom of the sulfur substituent in any thiiranium salt (78CC630). Iodide and fluoride ion (the latter in the presence of a crown ether) prefer to attack the sulfur atom of (46). cis-l-Methyl-2,3-di-t-butylthiiranium fluorosulfonate, despite being somewhat hindered, nevertheless is attacked at a ring carbon atom by chloride and bromide ions. The trans isomer could not be prepared its behavior to nucleophiles is therefore unknown (74JA3146). 

When 6/3-aminopenicillanic acid (6-APA) is diazotized in the presence of chloride ion, the principal product obtained is 6a-chloropenicillanic acid (38) (62JOC2668), presumably by way of the diazo intermediate (39 Scheme 29) (72JCS(P1)895). If the diazotization is carried out in the presence of excess bromide instead of chloride, significant amounts of the 6,6-dibromo derivative are obtained, and in the case of excess iodide the 6,6-diiodopenicillanic acid becomes the predominant product (69JCS(C)2123). The 6,6-dihalo products presumably arise from nitrous acid oxidation of halide to halogen, which then reacts with (39). 

Despite this, they are good solvents for chloride-ion transfer reactions, and solvo-acid-solvo-base reactions (p. 827) can be followed conductimetri-cally, voltametrically or by use of coloured indicators. As expected from their constitution, the trihalides of As and Sb are only feeble electron-pair donors (p. 198) but they have marked acceptor properties, particularly towards halide ions (p. 564) and amines. 

In practical terms, it is suggested that, in any application where the presence of halide ions may cause problems, the concentration of these be monitored to ensure the purity of the liquids. This may be achieved either by the use of an ion-sensitive electrode, or alternatively by use of a chemical method such as the Vollhard procedure for chloride ions [52]. Seddon et al. have reported that effectively identical results were obtained with either method [37]. 

The alkylation of sodium 2-naphthoxide with benzyl bromide in tetrabutylam-monium and tetrabutylphosphonium halide salts was investigated by Brunet and Badri [50] (Scheme 5.1-21). The yields in this reaction were quantitative, and alkylation occurred predominantly on the oxygen atom of the naphthoxide ion (typically 93-97 %). The rate of the reaction was slower in the chloride salts, due to the benzyl bromide reacting with chloride ion to give the less reactive benzyl chloride. 

For alkaline duty, steel can sometimes be used up to approximately pH 11. Zinc, aluminum and similar metals and their alloys have limited use in alkaline conditions because they dissolve, giving complex anions. Iron and steel react in this way above about pH 12. Approximate limits of use for zinc are pH 6-12 and aluminum alloy pH 4-8. Stainless steels, including the lower grades, can be used even in the presence of chloride ions at pH levels of approximately In the absence of halides they can be used up to about pH 13. 

It is in this area that most work has been carried out, particularly in relation to corrosion resistance in sulphuric acid solutionsBourelier etal. and Raicheff etal. investigated the inhibitive effect of chloride ions on corrosion in sulphuric acid. The inhibition efficiency was found to depend on the alloy composition, alloy surface and chloride concentration. The more aggressive the environment, the greater the inhibition efficiency. Yagupol skaya etal studied the effect of iodine additions to sulphuric acid on the corrosion resistance of Ni and Ni-Fe alloys. Again there was an inhibitive effect caused by the halide ion. 

Although halide ions are aggressive in near-neutral solutions they can be used to improve the action of inhibitors in acid corrosion (see Practice Acid Solutions). Variations exist among the halides, e.g. chloride ions favour the stress-corrosion cracking of Ti in methanol whereas iodide ions have an inhibitive action ... 

Theory. The anion exchange resin, originally in the chloride form, is converted into the nitrate form by washing with sodium nitrate solution. A concentrated solution of the chloride and bromide mixture is introduced at the top of the column. The halide ions exchange rapidly with the nitrate ions in the resin, forming a band at the top of the column. Chloride ion is more rapidly eluted from this band than bromide ion by sodium nitrate solution, so that a separation is possible. The progress of elution of the halides is followed by titrating fractions of the effluents with standard silver nitrate solution. 

Ion 21 can either lose a proton or combine with chloride ion. If it loses a proton, the product is an unsaturated ketone the mechanism is similar to the tetrahedral mechanism of Chapter 10, but with the charges reversed. If it combines with chloride, the product is a 3-halo ketone, which can be isolated, so that the result is addition to the double bond (see 15-45). On the other hand, the p-halo ketone may, under the conditions of the reaction, lose HCl to give the unsaturated ketone, this time by an addition-elimination mechanism. In the case of unsymmetrical alkenes, the attacking ion prefers the position at which there are more hydrogens, following Markovnikov s rule (p. 984). Anhydrides and carboxylic acids (the latter with a proton acid such as anhydrous HF, H2SO4, or polyphosphoric acid as a catalyst) are sometimes used instead of acyl halides. With some substrates and catalysts double-bond migrations are occasionally encountered so that, for example, when 1 -methylcyclohexene was acylated with acetic anhydride and zinc chloride, the major product was 6-acetyl-1-methylcyclohexene. ... 

The reaction between Fe(IlI) and Sn(Il) in dilute perchloric acid in the presence of chloride ions is first-order in Fe(lll) concentration . The order is maintained when bromide or iodide is present. The kinetic data seem to point to a fourth-order dependence on chloride ion. A minimum of three Cl ions in the activated complex seems necessary for the reaction to proceed at a measurable rate. Bromide and iodide show third-order dependences. The reaction is retarded by Sn(II) (first-order dependence) due to removal of halide ions from solution by complex formation. Estimates are given for the formation constants of the monochloro and monobromo Sn(II) complexes. In terms of catalytic power 1 > Br > Cl and this is also the order of decreasing ease of oxidation of the halide ion by Fe(IlI). However, the state of complexing of Sn(ll)and Fe(III)is given by Cl > Br > I". Apparently, electrostatic effects are not effective in deciding the rate. For the case of chloride ions, the chief activated complex is likely to have the composition (FeSnC ). The kinetic data cannot resolve the way in which the Cl ions are distributed between Fe(IlI) and Sn(ll). 

Bi(V) in aqueous perchloric acid is very strongly oxidising but kinetic studies have been confined to a few stopped-flow measurements on oxidation of iodide, bromide and chloride ions. The appearance of Bi(III)-halide complexes was first-order with respect to Bi(III) and in all cases the first-order rate coefficient,, was the same, i.e. 161 + 8 sec at 25 °C ([H30 ] = 0.5 M, p. = 2.0 A/), irrespective of the nature or concentration of the halide. A preliminary attack on solvent is compatible with these interesting results, viz. 

The induced reduction of chlorate can be inhibited by iodide, bromide and chloride ions. The effectiveness of these ions is about 400 10 1 in the given order. The order and the magnitude of the effect agree fairly well with the catalytic activity of these ions in the arsenic(III)-cerium(IV) reaction. This inhibition by halides is presumably connected with the opening of a new two-electron route for the arsenic(III)-cerium(IV) reaction. 

The chloride ion is one of the most frequently analysed by IC, e.g. following up combustion of polymers [854,855] similar analyses were reported for the bromide ion [854,855] and nitrite [855]. Analysis of polyester resins for halogens or phosphorous components may be carried out via conversion to halides and phosphates, respectively. 

The molecular structures from electron diffraction of zinc dichloride, zinc dibromide, and zinc diiodide have been reinvestigated.612 The important effects halides have on geometry have also been investigated, in particular the changes from octahedral to tetrahedral geometry in the presence of chloride ions have been studied.613... 

Halides Metal ion(s) + halogen ion Common salt (sodium chloride), a component of animal diets Fluorite (calcium fluoride), a lapidary material and flux... 

---