Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Graft copolymers from anionic

Graft Copolymers from Anionic Polymerization. The similar reactivity of the polymer anion 2 and organoUthium reagents suggested that the anion sites could be used to initiate anionic polymerization reactions. In this manner, both organic and inorganic graft copolymers of poly(pho hazenes) have been prepared. [Pg.251]

The fact that alcohols are sufficiently nucleophilic to initiate the anionic polymerization of FO (a unique feature, not shared by other epoxides, including styrene oxide), provides a useful way of preparing block, star and graft copolymers from, respectively, diols, polyols and OH-bearing polymers such as cellulose and poly(vinyl alcohol). The FO blocks and grafts however, are oligomeric in size, because transfer reactions limit their growth [4d]. [Pg.126]

Lu, H. L. and Chung, T. C. 1999. Synthesis of PP graft copolymers via anionic living graft-from reactions of polypropylene containing reactive p-methylstyrene units. Journal of Polymer Science, Part A Polymer Chemistry 37 4176—4183. [Pg.183]

This polymerization technique provides an extensive and unprecedented control over the polymerization process. This includes polymer composition, microstructure, molecular weight, molecular weight distribution, choice of functional end groups and even monomer sequence distribution. The synthesis of graft copolymers by anionic pol3nnerization can be achieved either by "grafting from" or by "grafting onto" processes. [Pg.406]

A radical initiator based on the oxidation adduct of an alkyl-9-BBN (47) has been utilized to produce poly(methylmethacrylate) (48) (Fig. 31) from methylmethacrylate monomer by a living anionic polymerization route that does not require the mediation of a metal catalyst. The relatively broad molecular weight distribution (PDI = (MJM ) 2.5) compared with those in living anionic polymerization cases was attributed to the slow initiation of the polymerization.69 A similar radical polymerization route aided by 47 was utilized in the synthesis of functionalized syndiotactic polystyrene (PS) polymers by the copolymerization of styrene.70 The borane groups in the functionalized syndiotactic polystyrenes were transformed into free-radical initiators for the in situ free-radical graft polymerization to prepare s-PS-g-PMMA graft copolymers. [Pg.41]

Concerning the synthesis of graft copolymers, Jedlinski et al. have prepared poly(MMA-g-(3BL) copolymers via anionic grafting of 3BL from a modified PMMA backbone [85]. PMMA chains were partially saponified by potassium hydroxide and complexed by 18C6 crown ether so as to act as multifunctional mac-... [Pg.34]

Here we discuss dispersion polymerizations that are not related to vinyl monomers and radical polymerization. The first one is the ring-opening polymerization of e-caprolactone in dioxane-heptane (30). A graft copolymer, poly(dodecyl acrylate)-g-poly(e-caprolactone), is used as a stabilizer. The polymerization proceeds via anionic or pseudoanionic mechanism initiated by diethylaluminum ethoxide or other catalysts. The size of poly(caprolactone) particles depends on the composition of stabilizer, ranging from 0.5 to 5 i,m. Lactide was also polymerized in a similar way. Poly(caprolactone) and poly(lactide) particles with a narrow size distribution are expected to be applied as degradable carriers of drugs and bioactive compounds. [Pg.620]

The metallocene catalyst with cationic nature and spatially opened active site provides favorable condition for the incorporation of p-alkylstyrene (p-ms) to polyolefins. The p-ms groups can be easily metallated to produce "stable" polymeric anions for graft-from polymerization. With the coexist of anion-polymerizable monomers, we have prepared many graft copolymers, such as PE-g-PS, PE-g-PMMA, PE-g-PAN, PP-g-PS, PP-g-PB, PP-g-PI and PP-g-PMMA. [Pg.63]

Table 4 summarizes the reaction conditions and the experimental results. Overall, the experimental results clearly show a new class of PE graft copolymers which can be conveniently prepared by the tranformation of metallocene catalysis to anionic graft-from polymerization. [Pg.70]

The lithiated polyethylene copolymer was then suspended in hexane or THF solvent. The graft-from reactions were carried out in slurry solution by reacting the lithiated polyethylene copolymer with anionic polymerizable monomers, such as styrene and p-methylstyrene. After certain reaction time, 10 ml of isopropanol was added to terminate the graft-from reaction. The precipitated polymer was filtered and then subjected to fractionation. Good solvents for backbone and side chain polymers were used during the fractionization, using a Soxhlet apparatus under N2 for 24 hours. The soluble fractions were isolated by vacuum-removal of solvent. Usually, the total soluble fractions were less than 5 % of the product. The major insoluble fraction was PE graft copolymer, which was completely soluble in xylene or trichlorobenzene at elevated temperatures. [Pg.73]

An anionic technique by indirect grafting was proposed for N-metallation of Nylon by Yamaguchi (153-155), in which alcali metals dissolved in liquid ammonia displace the amidic hydrogen atoms. Nylon derivatives and graft copolymers can be synthetized from the N-metallated Nylon (153). For ethylene oxide as grafting monomer, the metallated fibers were soaked in a tetrahydro-furan solution of the monomer, at 60° C (154). Methyl methacrylate is grafted on Nylon with a conversion over 90% by this technique (155). Other procedures involve the use of sodium methoxide in methanol solution and subsequent anionic graft copolymerization of acrylonitrile in a tetrahydrofuran solution (156). [Pg.105]

Recently, Muller et al. studied block and graft copolymers poly(n-butyl acrylate)-Wocfc/gra/f-poly(acrylic acid), PnBA-h/g-PAA [136]. The non-polar block/backbone has a low glass transition temperature, thus dynamic micelles were expected the ionic block/side-chains are weak anionic polyelectrolytes, thus a strong dependence of micellization on pH could be expected. The graft copolymers were synthesized by ATRP copolymerization of poly(-ferf-butyl acrylate) macromonomers with n-butyl acrylate, followed by hydrolysis of the terf-butyl acrylate side-chains to PAA [137]. The length of the PAA side chains was varied from 20 to 85 monomer units and their number from 1.5 to 10, whereas the length of the backbone was kept at ca. 130 units. [Pg.204]

The use of polymeric initiators or coinitiators to induce the polymerisation of a second monomer by a cationic mechanism is a particularly attractive possibility, since it would permit the synthesis of block and graft copolymers. The search for adequate systems in this context has been intensive, but only very recently has it met with some success, and this is far from being as spectacular as the achievements obtained in the same area with anionic systems. The main difficulties to be surmcwntedhave been discussed in the general introduction to this review (see Chap. I), and have to do with the ubiquity of transfer and termination reactions in cationic polymerisation. Nevertheless, the advances of the last few years seem encouraging and one would expect that the near future will provide considerable progress, both quantitative and qualitative. [Pg.238]

The synthesis and purification of polystyrene methacryloyl macromonomers (PS-MA) in the molecular weight range Mn= 1000-2000 g mol 1 by living anionic polymerization of styrene (S), termination with ethylene oxide (EO), and subsequent reaction with methacrylic chloride has already been described in detail elsewhere [180] (see also Scheme 16). In this context it has to be emphasized that the hydroxyethyl-terminated PS-MA macromonomer precursor (PS-OH) as obtained after purification of the crude PS-OH by silica column chromatography (cyclohexane/dichloromethane 1/1 v/v) and as charged in the PS-MA synthesis still contains up to about 15 wt-% of non-functionalized polystyrene (PS-H). This PS-H impurity of the PS-MA macromonomer does not interfere with the PS-MA synthesis and the subsequent TBA/PS-MA copolymerization and is easily and conveniently removed from the resulting PTBA-g-PS graft copolymer (see below). [Pg.31]

Well-characterized systems. This depends on the appropriate chemistry and subsequent characterization (typical issues here are the polydispersity, control of grafting density, reproducibility of procedure to obtain identical particles). One frequent problem here is that the price one pays for such systems is tlie availability of small amounts (sometimes only fractions of 1 g) of material. For example, multiarm star polymers are in many ways unique, clean, soft colloids [ 19,23], but their nontrivial synthesis makes them not readily available. On the other hand, recent developments witli block copolymer micelles from anionically synthesized polymers [54-58] and arborescent graft copolymer synthesis [40] appear to have adequately addressed this issue for making available different alternative star-like systems. [Pg.14]


See other pages where Graft copolymers from anionic is mentioned: [Pg.118]    [Pg.49]    [Pg.296]    [Pg.6520]    [Pg.541]    [Pg.387]    [Pg.31]    [Pg.55]    [Pg.169]    [Pg.113]    [Pg.9]    [Pg.29]    [Pg.133]    [Pg.312]    [Pg.481]    [Pg.67]    [Pg.74]    [Pg.124]    [Pg.88]    [Pg.88]    [Pg.45]    [Pg.149]    [Pg.119]    [Pg.132]    [Pg.53]    [Pg.4]    [Pg.28]    [Pg.45]    [Pg.593]    [Pg.100]    [Pg.119]    [Pg.132]   


SEARCH



Anionic graft copolymers

Anionic grafting

Graft anionic

Graft copolymers

Graft copolymers from anionic polymerization

Graft copolymers grafting from

Graft grafting from

Grafted copolymers

Grafting copolymers

Grafting from

© 2024 chempedia.info