Fumarate addition

Fumarate Additions. One strategy used by some microorganisms to initiate the transformations of some organic compounds involves the addition of fumarate to the substrate ... 

Recently, evidence for this microbial transformation initiation strategy has also been seen for alkanes incubated in anaerobic cultures (Kropp et al., 2000 Rabus et al., 2001). In one case, a denitrifying bacterium was involved, while in the other case, the alkane was metabolized by a sulfate-reducing organism. Consistent with the hydrogen abstraction-fumarate addition mechanism (Fig. 17.11), succinate was found attached to the subterminal carbons of alkanes like hexane and dodecane ... 

Flavocytochrome c3 (EC 1.3.99.1) isolated from Shewanella frigidimarina is a unique fumarate reductase of 63.8 kDa MW in a single subunit composed of two domains. The active site is located in the flavin domain. The heme domain contains four c-type hemes, each with a bis-His axial ligation. It has been proposed that this domain is similar to cytochrome c3 from Desulfovibrio desulfuricans. On pyrolytic graphite (edge) electrodes in the presence of polymyxin the single redox centres were examined. Fumarate addition is followed by a catalytic current [108]. 

Some research of metabolic regulation had focused on the addition of organic acids, such as fumarate, citrate, succinate, etc. Fumarate addition was beneficial for 1,3-PD production by K. pneumoniae, but the 1,3-PD productivity still remained low (Lin et al., 2005). A mixture of organic acids including citrate, fumarate, and succinate was added into 1,3-PD fermentation by K. pneumoniae under fed-batch culture, which led to significant increase in cell growth and 1,3-PD production, and sharp decrease in the formation of by-products, especially lactic acid and ethanol (Xueetal.,2010). 

Lin RH, Liu HJ, Hao J, Cheng K, Liu DH. (2005). Enhancement of 1,3-propanediol production by Klebsiella pneumoniae with fumarate addition. Biotechnol Lett, 27, 1755-1759. 

Valdfe, L.C.C., Newbold, C.J., Wallace, R.J., 1999. Influence of sodium fumarate addition on mmen fermentation in vitro. British Journal of Nutrition 81,59-64. 

Additives acting on the pour point also modify the crystal size and, in addition, decrease the cohesive forces between crystals, allowing flow at lower temperatures. These additives are also copolymers containing vinyl esters, alkyl acrylates, or alkyl fumarates. In addition, formulations containing surfactants, such as the amides or fatty acid salts and long-chain dialkyl-amines, have an effect both on the cold filter plugging point and the pour point. 

The addition of active methylene compounds (ethyl malonate, ethyl aoeto-acetate, ethyl plienylacetate, nltromethane, acrylonitrile, etc.) to the aP-double bond of a conjugated unsaturated ketone, ester or nitrile In the presence of a basic catalyst (sodium ethoxide, piperidine, diethylamiiie, etc.) is known as the Michael reaction or Michael addition. The reaction may be illustrated by the addition of ethyl malonate to ethyl fumarate in the presence of sodium ethoxide hydrolysis and decarboxylation of the addendum (ethyl propane-1 1 2 3-tetracarboxylate) yields trlcarballylic acid ... 

Description of Method. Salt substitutes, which are used in place of table salt for individuals on a low-sodium diet, contain KCI. Depending on the brand, fumaric acid, calcium hydrogen phosphate, or potassium tartrate also may be present. Typically, the concentration of sodium in a salt substitute is about 100 ppm. The concentration of sodium is easily determined by flame atomic emission. Because it is difficult to match the matrix of the standards to that of the sample, the analysis is accomplished by the method of standard additions. 

The enzyme fumarase catalyzes the stereospecific addition of water to fumarate to form L-malate. A standard solution of fumarase, with a concentration of 0.150 tM, gave a rate of reaction of 2.00 tM mim under conditions in which the concentration of the substrate was significantly greater than K. The rate of reaction for a sample, under identical conditions, was found to be 1.15 tM mimh What is the concentration of fumarase in the sample ... 

The FCC is to food-additive chemicals what the USP—NF is to dmgs. In fact, many chemicals that are used in dmgs also are food additives (qv) and thus may have monographs in both the USP—NF and in the FCC. Examples of food-additive chemicals are ascorbic acid [50-81-7] (see Vitamins), butylated hydroxytoluene [128-37-0] (BHT) (see Antioxidants), calcium chloride [10043-52-4] (see Calcium compounds), ethyl vanillin [121-32-4] (see Vanillin), ferrous fumarate [7705-12-6] and ferrous sulfate [7720-78-7] (see Iron compounds), niacin [59-67-6] sodium chloride [7647-14-5] sodium hydroxide [1310-73-2] (see lkaliand cm ORiNE products), sodium phosphate dibasic [7558-79-4] (see Phosphoric acids and phosphates), spearmint oil [8008-79-5] (see Oils, essential), tartaric acid [133-37-9] (see Hydroxy dicarboxylic acids), tragacanth [9000-65-1] (see Gums), and vitamin A [11103-57-4]. 

Isomerization. Maleic acid is isomerized to fumaric acid by thermal treatment and a variety of catalytic species. Isomerization occurs above the 130 to 140°C melting point range for maleic acid but below 230°C, at which point fumaric acid is dehydrated to maleic anhydride. Derivatives of maleic acid can also be isomerized. Kinetic data are available for both the uncatalyzed (73) and thiourea catalyzed (74) isomerizations of the cis to trans diacids. These data suggest that neither carbonium ion nor succinate intermediates are involved in the isomerization. Rather, conjugate addition imparts sufficient single bond character to afford rotation about the central C—C bond of the diacid (75). 

Nucleophilic Addition. Nucleophilic reagents attack the -carbon position in the conjugated maleic and fumaric frameworks. Basic reaction conditions favor these condensations for the addition of glycolate (21) to maleate [142-44-9] (22) ... 

This Michael-type addition is catalyzed by lanthanum(3+) [16096-89-2] (80). Ethylene glycol [107-21-1] reacts with maleate under similar conditions (81). A wide range of nucleophilic reagents add to the maleate and fumarate frameworks including alcohols, ammonia, amines, sulfinic acids, thioureas, Grignard reagents, Michael reagents, and alkali cyanides (25). 

Fumaric acid and malic acid [6915-15-7] are produced from maleic anhydride. The primary use for fumaric acid is in the manufacture of paper siting products (see Papermaking additives). Fumaric acid is also used to acidify food as is malic acid. Malic acid is a particularly desirable acidulant in certain beverage selections, specifically those sweetened with the artificial sweetener aspartame [22839-47-0]. 

The reaction rate of fumarate polyester polymers with styrene is 20 times that of similar maleate polymers. Commercial phthaHc and isophthaHc resins usually have fumarate levels in excess of 95% and demonstrate full hardness and property development when catalyzed and cured. The addition polymerization reaction between the fumarate polyester polymer and styrene monomer is initiated by free-radical catalysts, commercially usually benzoyl peroxide (BPO) and methyl ethyl ketone peroxide (MEKP), which can be dissociated by heat or redox metal activators into peroxy and hydroperoxy free radicals. 

As the quinone stabilizer is consumed, the peroxy radicals initiate the addition chain propagation reactions through the formation of styryl radicals. In dilute solutions, the reaction between styrene and fumarate ester foUows an alternating sequence. However, in concentrated resin solutions, the alternating addition reaction is impeded at the onset of the physical gel. The Hquid resin forms an intractable gel when only 2% of the fumarate unsaturation is cross-linked with styrene. The gel is initiated through small micelles (12) that form the nuclei for the expansion of the cross-linked network. 

Among the preformed polymers cured by minor additions of aHyl ester monomers and catalysts followed by heat or irradiation are PVC cured by diallyl fumarate (82), PVC cured by diallyl sebacate (83), fluoropolymers cured by triaHyl trimeUitate (84), and ABS copolymers cured by triaUyl trimeUitate (85). 

Addition of dialkyl fumarates to DAP accelerates polymerization maximum rates are obtained for 1 1 molar feeds (41). Methyl aUyl fumarate [74856-71-6] (MAF), CgH QO, homopolymerizes much faster than methyl aUyl maleate [51304-28-0] (MAM) and gelation occurs at low conversion more cyclization occurs with MAM. The greater reactivity of the fumarate double bond is shown in copolymerization of MAF with styrene in bulk. The maximum rate of copolymerization occurs from monomer ratios, almost 1 1 molar, but no maximum is observed from MAM and styrene. Styrene hinders cyclization of both MAF and MAM. 

With an activated C—C triple bond two successive additions can occur if the intermediate alkene is reactive enough. DMAD and 3,5-dimethylpyrazole give an initiaj fumarate (255) which reacts further at the other end to form regioselectively the succinates (256). On the other hand, methyl ethynyl ketone reacts twice at the same carbon atom with pyrazole to form 1,1-pyrazolylbutanone (258) (68ZC458). The probable intermediate, a pyrazolide vinylogue (257), can be prepared from methyl chlorovinyl ketone and pyrazole, in a reaction which is similar to acetylation (Section 4.04.2.1.3(x)). 

---