Free radical polymerization agents

Emulsion Adhesives. The most widely used emulsion-based adhesive is that based upon poly(vinyl acetate)—poly(vinyl alcohol) copolymers formed by free-radical polymerization in an emulsion system. Poly(vinyl alcohol) is typically formed by hydrolysis of the poly(vinyl acetate). The properties of the emulsion are derived from the polymer employed in the polymerization as weU as from the system used to emulsify the polymer in water. The emulsion is stabilized by a combination of a surfactant plus a coUoid protection system. The protective coUoids are similar to those used paint (qv) to stabilize latex. For poly(vinyl acetate), the protective coUoids are isolated from natural gums and ceUulosic resins (carboxymethylceUulose or hydroxyethjdceUulose). The hydroHzed polymer may also be used. The physical properties of the poly(vinyl acetate) polymer can be modified by changing the co-monomer used in the polymerization. Any material which is free-radically active and participates in an emulsion polymerization can be employed. Plasticizers (qv), tackifiers, viscosity modifiers, solvents (added to coalesce the emulsion particles), fillers, humectants, and other materials are often added to the adhesive to meet specifications for the intended appHcation. Because the presence of foam in the bond line could decrease performance of the adhesion joint, agents that control the amount of air entrapped in an adhesive bond must be added. Biocides are also necessary many of the materials that are used to stabilize poly(vinyl acetate) emulsions are natural products. Poly(vinyl acetate) adhesives known as "white glue" or "carpenter s glue" are available under a number of different trade names. AppHcations are found mosdy in the area of adhesion to paper and wood (see Vinyl polymers). 

Phosphoranyl radicals can be involved [77] in RAFT processes [78] (reversible addition fragmentation transfer) used to control free radical polymerizations [79]. We have shown [77] that tetrathiophosphoric acid esters are able to afford controlled/living polymerizations when they are used as RAFT agents. This result can be explained by addition of polymer radicals to the P=S bond followed by the selective p-fragmentation of the ensuing phosphoranyl radicals to release the polymer chain and to regenerate the RAFT agent (Scheme 41). 

The hazards of a rigid classification of substances which may modify the course of a free radical polymerization are well illustrated by the examples of inhibitors and retarders which have been cited. The distinction between an inhibitor or retarder, on the one hand, and a co-monomer or a transfer agent, on the other, is not sharply defined. Moreover, if the substance is a free radical, it is potentially either an initiator or an inhibitor, and it may perform both functions as in the case of triphenylmethyl. If the substance with which the chain radicals react is a molecule rather than a radical, three possibilities may arise (i) The adduct radicals may be completely unreactive toward monomer. They must then disappear ultimately through mutual interaction, and we have a clear-cut case of either inhibition or retarda-... 

The most common poly(alkenoic acid) used in polyalkenoate, ionomer or polycarboxylate cements is poly(acrylic acid), PAA. In addition, copolymers of acrylic acid with other alkenoic acids - maleic and itaconic and 3-butene 1,2,3-tricarboxylic acid - may be employed (Crisp Wilson, 1974c, 1977 Crisp et al, 1980). These polyacids are prepared by free-radical polymerization in aqueous solution using ammonium persulphate as the initiator and propan-2-ol (isopropyl alcohol) as the chain transfer agent (Smith, 1969). The concentration of poly(alkenoic add) is kept below 25 % to avoid the danger of explosion. After polymerization the solution is concentrated to 40-50 % for use. 

Figure 14.3.2 The molecular structure of dodecanethiol, a chain-transfer agent in a free-radical polymerization reaction.

Moore and Hemmens [119] studied the photosensitization of primaquine and other antimalarial agents. The drugs were tested for in vitro photosensitizing capability by irradiation with 365 nm ultraviolet light in aqueous solutions. The ability of these compounds to photosensitize the oxidation of 2,5-dimethylfuran, histidine, trypotophan, or xanthine, and to initiate the free radical polymerization of acrylamide was examined in the pH range 2 12. Primaquine does not have significant photochemical activity in aqueous solution. 

A number of different materials were used as chain transfer agents to control molecular weight. These results are shown in Table 6.1. The effect of varying concentration of t-butyl alcohol and reaction temperature is shown in Figure 6.1. The results are consistent with normal free radical polymerizations. Polymer output was characterized by inherent viscosity and ZST tests. 

PVA/acrylamide blend membranes prepared on cheese cloth support by y-irradiation induced free radical polymerization can be used for urease entrapment. The enzyme urease is entrapped in the membrane during polymerization process and using glutaraldehyde as cross-linking agent. The main advantage of this blend to this process is that it can be reused a number of times without significant loss of urease activity [292],... 

A critical survey of the literature on free radical polymerizations in the presence of phase transfer agents indicates that the majority of these reactions are initiated by transfer of an active species (monomer or initiator) from one phase to another, although the exact details of this phase transfer may be influenced by the nature of the phase transfer catalyst and reaction medium. Initial kinetic studies of the solution polymerization of methyl methacrylate utilizing solid potassium persulfate and Aliquat 336 yield the experimental rate law ... 

Semitelechelic HPMA polymers were synthesized by free radical polymerization of HPMA using 2,2 -azobis(isobutyronitrile) (AIBN) as the initiator and alkyl mercaptans as chain transfer agents. Alkyl mercaptans with different functional groups, namely, 2-mercaptoethylamine, 3-mercapto-propionic acid, 3-mercaptopropionic hydrazide, and methyl 3-mercapto-propionate, were used as the chain transfer agents ST HPMA polymers... 

The free radical polymerization of HPMA in the presence of mercaptans involves two different initiation mechanisms (Scheme 2) [26]. One is the initiation by RS radicals from chain transfer agent the other appears to be the direct initiation by the primary isobutyronitrile (IBN) radicals formed by the decomposition of AIBN [27]. The RS are formed by either the free radical transfer reaction of alkyl mercaptans with the IBN radicals or the chain transfer reaction of an active polymer chain with the mercaptans. The initiation by the RS radicals produces the ST polymers with a functional group at one end of the polymer chain. The initiation by IBN radicals leads to nonfunctional polymer chains with an IBN end group. The presence of the polymers with IBN end groups effects the purity and the functionality of ST polymers. As expected, the production of nonfunctionalized polymer chains is affected by reaction conditions. The polymerization is mainly terminated by chain transfer reaction with the mercaptans, but other termination mechanisms, such as disproportionation and recombination, take place depending on the reaction conditions [26]. 

Hydrogels can be made by a number of methods, but one of the most widely used methods is free radical polymerization of vinyl monomers. Examples of vinyl monomers used in our laboratory are shown in Table 1. Monomers are crosslinked with divalent monomers such as A,A -methyl-enebisacrylamide. Biodegradable crosslinking agents can also be used as long as they have bifunctionality. 

While in most of the reports on SIP free radical polymerization is utihzed, the restricted synthetic possibihties and lack of control of the polymerization in terms of the achievable variation of the polymer brush architecture limited its use. The alternatives for the preparation of weU-defined brush systems were hving ionic polymerizations. Recently, controlled radical polymerization techniques has been developed and almost immediately apphed in SIP to prepare stracturally weU-de-fined brush systems. This includes living radical polymerization using nitroxide species such as 2,2,6,6-tetramethyl-4-piperidin-l-oxyl (TEMPO) [285], reversible addition fragmentation chain transfer (RAFT) polymerization mainly utilizing dithio-carbamates as iniferters (iniferter describes a molecule that functions as an initiator, chain transfer agent and terminator during polymerization) [286], as well as atom transfer radical polymerization (ATRP) were the free radical is formed by a reversible reduction-oxidation process of added metal complexes [287]. All techniques rely on the principle to drastically reduce the number of free radicals by the formation of a dormant species in equilibrium to an active free radical. By this the characteristic side reactions of free radicals are effectively suppressed. 

There were several attempts to gain better control on the free radical polymerization process [18, 19], One of these methods was named the iniferter method. The compounds used in this technique can serve as m/tiator, trans/er agent and terminating agent [20-22], Another technique is based on the use of bulky organic compounds such as diaryl or triarylmethyl derivatives [23-25], The main disadvantages of these systems comprise slow initiation, slow exchange, direct reaction of counter radicals with monomers, and their thermal decomposition. Therefore, these techniques did not offer the desired level of control over the polymerization. 

---