Fourier transform infrared spectroscopy advantages

The principal reasons for choosing Fourier transform infrared spectroscopy are first, that these instruments record all wavelengths simultaneously and thus operate with maximum efficiency and, second, that Fourier transform infrared spectroscopy spectrometers have a more convenient optical geometry than do dispersive infrared instruments. These two facts lead to the following advantages. 

More sophisticated detection methods for gas chromatography are also employed in the analysis of hydrocarbons gas chromatography-mass spectrometry (EPA 8270C) and gas chromatography-Fourier transform infrared spectroscopy (EPA 8410). These procedures have a significant advantage in providing better characterization of the contaminants and thus are of particular use where some environmental modification of the hydrocarbons has taken place subsequent to soil deposition. 

Fourier transform infrared spectroscopy (FT—IR) has been developing into a viable analytical technique (56). The use of an interferometer requires a computer which increases the cost of the system. The ability of IR to differentiate geometrical isomers is still an advantage of the system, and computer techniques such as signal averaging and background subtraction, improve capabilities for certain analyses. 

The transform from the interferogram to the spectrum is carried out by the dedicated minicomputer on the instrument. The theory of Fourier-transform infrared spectroscopy has been treated, and is readily available in the literature.21,22,166 Consequently, the advantages of F.t.-i.r. dispersive spectroscopy will only be outlined in a qualitative sense (i) The Fellgett or multiplex advantage arises from the fact that the F.t.-i.r. spectrometer examines the entire spectrum in the same period of time as that required... 

The classical approach to the analysis of mixtures by use of infrared spectroscopy consists in identifying specific, strong bands that belong to a suspected component, obtain a pure spectrum of the suspected component, and then remove those in the spectrum of the mixture that are due to the identified compound. The process is repeated for the remaining bands in the mixture spectra. Once the component spectra are known for a mixture, a series of calibration curves is produced. These curves relate concentration to absorbance, using Beer s law. The concentration of the components of the mixture are then obtained by interpolation. The advantage of Fourier-transform, infrared spectroscopy is that components of a mixture may be... 

Structural study of polysaccharides and other carbohydrates in solution or in the amorphous state has been significantly enhanced through the application of Fourier-transform, infrared spectroscopy. Among the advantages of this method may be mentioned the high quality of the spectra, and the in-house ability to interact with the computer, so that the digitized spectra may be stored and manipulated in such a way that additional information is obtained. The application of F.t.-i.r. spectroscopy in the field of carbohydrate chemistry and biochemistry is still in its infancy,182 but... 

Several researchers have combined the separating power of supercritical fluid chromatography (SFC) with more informative spectroscopic detectors. For example, Pinkston et. al. combined SFC with a quadrupole mass spectrometer operated in the chemical ionization mode to analyze poly(dimethylsiloxanes) and derivatized oligosaccharides (7). Fourier Transform infrared spectroscopy (FTIR) provides a nondestructive universal detector and can be interfaced to SFC. Taylor has successfully employed supercritical fluid extraction (SFE)/SFC with FTIR dectection to examine propellants (8). SFC was shown to be superior over conventional gas or liquid chromatographic methods. Furthermore, SFE was reported to have several advantages over conventional liquid solvent extraction (8). Griffiths has published several... 

Fourier transform infrared spectroscopy (FTIR) has provided support to a number of areas in Diamond Shamrock s pesticide program. Commercially available FTIR spectrometers offer a number of advantages over dispersive instruments. Although some of the advantages are related to the ability to perform computerized data manipulations, the basic design of the FTIR system does provide superior capabilities in infrared spectroscopy (1). ... 

Perkins WD (1987) Fourier transform-infrared spectroscopy Part II Advantages of FT-IR J Chem Educ 64 A269-A271... 

Perkins, W. D. Fourier transform— Infrared spectroscopy Part D. Advantages of FT-ER. Journal of Chemical Education 64 11) A269-A271, 1987. 

Between the source and the detector is put either monochromators used in dispersive instruments or interferometers used in Fourier transform infrared (FT-IR) instruments. In a dispersive instrument the intensity at each wavenumber is measured one by one in sequence and only a small spectral range falls on the detector at any one time. In a FT-IR instrument the intensities of all the wavenumbers are measured simultaneously by the detector. Fourier transform infrared spectroscopy offers some advantages compared to dispersive instruments, namely (i) higher signal-to-noise ratios for spectra obtained under conditions of equal measurement time, and (ii) higher accuracy in frequency for spectra recorded over a wide range of frequencies. Therefore we will give below a brief picture of the principle of FT-IR spectroscopy, based on a Michelson interferometer (Fig. 2). 

Fourier-transform infrared spectroscopy (FTIR) and pH measurements are the techniques most often adapted for in-line IPC. pH measurements are used for reactions that are run in water or have an aqueous component, e.g., an aqueous extraction. FTIR is especially good for monitoring continuous reactions [12] and reactions that would be dramatically changed by exposure to the atmosphere and temperature of the laboratory. Suitable reactions include low-temperature reactions, reactions run under pressure, reactions with gaseous or toxic materials (e.g., ethylene oxide), and reactions run under inert atmosphere. Further advantages of in-line assays are that no samples need to be prepared, and assay results can be generated within minutes. 

Discuss the principles of Fourier transform infrared spectroscopy and nonlinear laser optics [74, 75], and of second harmonic and sum frequency generation. Compare the relative advantages of both techniques for the study of the bonding, orientation, and location of adsorbed molecules either on metal or on insulator surfaces. 

The principles of interferometty and the operation of an FT-IR instrument are explained in two articles by W. D. Perkins Fourier Transform-Infrared Spectroscopy, Part 1 Instrumentation, Journal of Chemical Education, 63 (January 1986) A5-A10, and Fourier Transform-Infrared Spectroscopy, Part 2 Advantages of FT-IR, Journal of Chemical Education, 64 (November 1987) A269-271. 

---