Formation of secondary compounds

Among compounds other than simple alkyl halides a halo ketones and a halo esters have been employed as substrates m the Gabriel synthesis Alkyl p toluenesul fonate esters have also been used Because phthalimide can undergo only a single alkyl ation the formation of secondary and tertiary amines does not occur and the Gabriel synthesis is a valuable procedure for the laboratory preparation of primary amines... 

Nitrile Intermediates. Most quaternary ammonium compounds are produced from fatty nitriles (qv), which are ia turn made from a natural fat or oil-derived fatty acid and ammonia (qv) (Fig. 2) (see Fats AND FATTY oils) (225). The nitriles are then reduced to the amines. A variety of reduciag agents maybe used (226). Catalytic hydrogenation over a metal catalyst is the method most often used on a commercial scale (227). Formation of secondary and tertiary amine side-products can be hindered by the addition of acetic anhydride (228) or excess ammonia (229). In some cases secondary amines are the desired products. 

Reductive cleavage of phenylhydrazones of carbonyl compounds provides a route to amines. The reduction is carried out conveniently in ethanol containing ammonia over palladium-on-carbon. Ammonia is used to minimize formation of secondary amines, derived by addition of the initially formed amine to the starting material (160). Alternatively, a two-phase system of benzene, cyclohexane, toluene, or dioxane and aqueous hydrochloric acid can be used. 

Acids catalyze the decomposition of secondary hydroperoxide with the formation of carbonyl compounds [46,83]. 

LaM03 and La, xSrxMO, (M = Co, Ni and Fe) perovskites are relatively unstable compared to their manganese counterparts LaMn03 and La, xSrxMn03. The former compounds readily react with zirconia electrolytes, leading to the formation of secondary phases at temperature as low as 1000°C in air. The Co3+ ions in LaCo03 are... 

Correlate reaction the reaction of telluronium salts with carbonyl compounds mediated by organoUthium reagents - formation of secondary alcohols... 

The effect of phosphate on alkaloid production has also been evaluated (138). Using a modified induction medium devoid of phosphate and other essential growth factors, production of secondary compounds was more rapid than when phosphate was present. A broader study of the phenomenon has been reported by a French group (139) where, using three alkaloids as markers, the disappearance of the major nutrients from the medium and the evolution of phosphates, nitrates, ammonium ions, glucose, and starch in the cells were observed over time. It was not possible to relate alkaloid accumulation to the appearance or disappearance of any one metabolite in particular. However, other workers have found that the rate of biomass accumulation was directly related to the rate of formation of cellular serpentine (40) (140). 

Other indices measure a secondary stage of oxidation, such as the anisidine value (ANV), pointing to formation of carbonyl compounds, capable of undergoing condensation reactions with p-anisidine, and the thiobarbituric acid reactive substance (TBARS) pointing to the presence of malondialdehyde (MDA) in particular. In biological systems, TBARS is of widespread use as a measure for the extent of oxidation damage. Another test for stability of oils to oxidation is based on the development of acidity as secondary product, for example, standards using the Rancimat equipment or a similar setup. 

Particulate carbon in the atmosphere exists predominantly in three forms elemental carbon (soot) with attached hydrocarbons organic compounds and carbonates. Carbonaceous urban fine particles are composed mainly of elemental and organic carbon. These particles can be emitted into the air directly in the particulate state or condense rapidly after Introduction into the atmosphere from an emission source (primary aerosol). Alternatively, they can be formed in the atmosphere by chemical reactions involving gaseous pollutant precursors (secondary aerosol). The rates of formation of secondary carbonaceous aerosol and the details of the formation mechanisms are not well understood. However, an even more fundamental controversy exists regarding... 

A number of species have been designated hazardous air pollutants (HAPs) or toxic air contaminants (TACs). Most are directly emitted into the air, but some also have significant secondary sources, i.e., are formed by chemical reactions in air. Furthermore, the ultimate health impacts are determined not only by the emissions and formation of such compounds in air but also by their atmospheric fates. In short, some pollutants react in air to form less toxic species, whereas others form more toxic compounds. Thus, scientific risk assessments of these pollutants require an accurate and complete understanding of their atmospheric chemistry. Some specific examples are discussed in this chapter. 

On treatment of certain other tertiary aromatic amines with nitrous acid, it has been found that either C-nitroso compounds, nuclear nitro compounds, or jV-nitrosoamines are formed with loss of an alkyl group. In the case of the nitrodimethylanilines, the latter two types of reaction may occur. The formation of nitro-jV-nitrosomethylanilines predominate at room temperature, whereas the formation of polynitro compounds predominates at more elevated temperatures. The formation of nitrosoamines from iVW-dimethylanilines appears to be particularly favored when both ortho positions are occupied by nitro groups, although /V-nitroso compounds were also obtainable from other nitrodimethylanilines. The product of the reaction, of course, is an /V-nitroso secondary amine. 

In the course of the catalytic hydrogenation of a,us dinitriles over Raney nickel, by-products are obtained from C-N and C-C bond formation. The mechanism of the formation of these compounds was investigated. Cyclic and linear secondary amines can result from the same secondary imine through a transimination process involving a ring-chain tautomerism. Stereochemical results for 2-aminomethyl-cyclopentylamine (AMCPA) are in accordance with a specific cyclisation pathway favored by an intramolecular hydrogen bond giving rise to the cis isomer from aminocapro-nitrile, unfavored in the case of adiponitrile which leads to the trans AMCPA as the major isomer. 

Cyanation of carbonyl compounds has one of the richest histories of any transformation in the field of asymmetric catalysis, and intensive research efforts have continued unabated since the editorial deadline for the first edition of Comprehensive Asymmetric Catalysis in 1998. This chapter will summarize all efforts in this area from 1998 to date, highlighting the most important catalytic systems from a synthetic and/or mechanistic standpoint. Significant advances in both the cyanation of aldehydes (formation of secondary cyanohydrins Section 28.2.1) and the cyanation of ketones (formation of tertiary cyanohydrins Section 28.2.2) will be addressed [1,2]. 

The fact that the co-ordination number for so many elements is six, and is generally independent of the nature of the co-ordinated groups, has made A. Werner suggest that the number is decided by available space rather than affinity, and that six is usually the maximum number which can be fitted about the central atom to form a stable system. Consequently, the co-ordination number represents a property of the atom which enables the constitution of molecular compounds to be referred back to actual linkings between definite atoms. A molecular compound is primarily formed through the agency of secondary valencies and, just as primary valencies determine the number of univalent atoms or their equivalent which can be linked to a central atom, so secondary valencies determine the number of mols. which can be attached to the central atom. The secondary valency is often active only towards definite mol. complexes, and hence the formation of additive compounds with other mol. complexes does not occur. Accordingly, the number of secondary valencies which are active towards different molecules is not always the same. 

The reduction is usually effected catalytically in ethanol solution using hydrogen under pressure in the presence of Raney nickel. As in the reduction of nitriles (Section 5.16.1, p. 771), which also involves the intermediate imine, ammonia or the amines should be present in considerable excess to minimise the occurrence of undesirable side reactions leading to the formation of secondary and tertiary amines. These arise from the further reaction of the carbonyl compound with the initially formed amine product. Selected experimental conditions for these reductive alkylation procedures have been well reviewed.210 Sodium borohydride has also been used as an in situ reducing agent and is particularly effective with mixtures of primary amines and aliphatic aldehydes and ketones.211... 

---