Fire control environmental hazards

In previous studies we found that improved emission-control devices (such as hot-side electrostatic precipitaters and wet-scrubber systems) now being installed on modern pulverized-coal-fired power plants modify the quantity, chemical composition, and distribution characteristics of fine aerosol emissions (12,13). Such modifications must be understood to adequately assess human health and environmental hazards, and to apportion the contributions of sources to urban pollutant inventories. 

Facilities designing or adding environmental control, fire safety, or hazard control must ensure that these systems do not adversely impact the process or equipment. This is an endorsement for OSHAs Management of Change (for a non-covered process). 

The likelihood (probability) of an accidental release based on tlie history of current conditions and controls at tlie facility, consideration of any unusual environmental conditions (e.g., areas in flood plains), or tlie possibility of simultaneous emergency incidents (e.g., flooding or fire liazards resulting in tlie release of hazardous materials). 

Fourteen formulations of chemical alternatives were submitted to EPA under confidentiality and they were assessed based on numerous human health and ecotoxicity endpoints in addition to bioaccumulation potential and environmental persistence. They were also screened for potential exposure to workers, users and the aquatic environment. Where data gaps existed, EPA experts used models and chemical analogs to estimate the hazard for a particular endpoint. The literature and test data reviews were published in the final report, Environmentally Preferable Options for Furniture Fire Safety Low Density Furniture Foam . In addition, each hazard endpoint was ranked with a concern level (High, Moderate or Low) based on the criteria used by the EPA s New Chemicals Program to rate the concern level of new chemicals submitted under the Toxic Substance Control Act (TSCA). As seen in Figure 8.2, where the hazard endpoint rankings are bold, the value is based on experimental data. Where the hazard endpoints are presented in italic font, the value is estimated based on models or chemical analogs. In this way, detailed hazard information was summarized and presented in a clear and concise format. 

Low concentrations of VOCs in ambient ah of 1 to 1,000 ppmv (parts per million based on volume) are often harmful to human health. VOCs also promote the photochemical formation of ozone and other contaminants, and in high concentrations are a fire hazard. These severe environmental implications have resulted in increasingly stringent legislation in the U.S.A. and elsewhere to limit release of VOCs into the atmosphere. Control technologies for VOCs release include combustion and vapor recovery. Vapor recovery is preferred as combustion may result in the production of other air pollutants, and destroy valuable VOCs. 

Mirex (dodecachlorooctahydro-l,3,4-metheno-2H-cyclobuta [tv/] pentalene) has been used extensively in pesticidal formulations to control the red imported fire ant (Solenopsis invicta), and as a flame retardant in electronic components, plastics, and fabrics. One environmental consequence of mirex was the severe damage recorded to fish and wildlife in nine southeastern states and the Great Lakes, especially Lake Ontario. In 1978, the U.S. Environmental Protection Agency banned all further use of mirex, partly because of the hazards it imposed on nontarget biota. These included ... 

Impact on the environment may result from both unwanted fires, improper control of fire effluent or improper use of suppression system agents. Environmental considerations impact decisions on whether to provide protection for a hazard, and whether this protection should be provided automatically or manually. Scenarios to be considered include uncontrolled fires, potential hazardous situations, firefighting training, and fixed or mobile vehicle suppression system discharge testing. 

Assurances that new and existing chemical processes are conducted safely have never been more needed. Public awareness of the effects of chemical exposure has increased since the early 1970s. Although the initial focus of the Occupational Safety and Health Act of 1970 was on safety, clearly the emphasis now is on health. People at all levels of society are concerned about exposure to chemicals and the possible short- and longterm effects of chemicals on human health. The effects of chemicals on the environment from past or present waste sites, accidental releases or spills, and fires and explosions are reported daily in the news media. Control of all chemical processes to avoid accidental discharges and/or upsets that lead to fires, explosions, and environmental release is essential in the laboratory, the pilot plant, and the manufacturing plant. Chemical process hazard reviews are necessary at each step in the development of a process to ensure that the process can be controlled and conducted so as to minimize the risks to personnel, property, and the environment. 

---