Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

FESEM scanning electron

FESEM, scanning electron microscopy for field emission gun. ... [Pg.269]

A Dektak siuface profilometer was used to measure the etch rates. The profiles of the etched films were observed by field emission scanning electron microscopy (FESEM). In addition, x-ray photoelectron spectroscopy PCPS) was utilized to examine the existence of possible etch products or redeposited materials, and to elucidate the etch mechanism of Co2MnSi magnetic films in a CVOa/Ar plasma. [Pg.378]

MCM-41 samples have been characterized by means of powder X-ray diffraction (X Pert Philips, CuKa radiation), nitrogen adsorption measurements at 77 K (Quantachrome Autosorbl) and Field Emission Scanning Electron Microscopy (Assing FESEM Supra 25) before soaking in SBF and after different immersion times. [Pg.249]

Scanning Electron Microscopy and Extreme FESEM in Catalysis. 195... [Pg.194]

VI. Recent Advances in Ultra-High Resolution, Low-Voltage Field Emission Scanning Electron Microscopy and Extreme FESEM in Catalysis... [Pg.217]

Field emission devices, 17 49-50 Field emission FPDs (FEDs), 22 259 Field emission microscope (FEM), 16 503 Field emission microscopy (FEM), 24 74 Field emission scanning electron microscope (FESEM), 16 492 Field emission scanning electron... [Pg.356]

Fig. 8 Different views of T. foetus hydrogenosomes ( ) after field-emission scanning electron microscopy (FESEM) (a) and freeze-etching (b,c). An isolated hydrogenosome obtained from T. foetus observed by FESEM, where details of its surface can be seen, b A calcium deposit in the peripheral vesicle (asterisk) c shows that the peripheral vesicle (arrow) presents a smooth surface, distinct from the organelle body. Bars = 50 nm. (From Benchimol 2000)... Fig. 8 Different views of T. foetus hydrogenosomes ( ) after field-emission scanning electron microscopy (FESEM) (a) and freeze-etching (b,c). An isolated hydrogenosome obtained from T. foetus observed by FESEM, where details of its surface can be seen, b A calcium deposit in the peripheral vesicle (asterisk) c shows that the peripheral vesicle (arrow) presents a smooth surface, distinct from the organelle body. Bars = 50 nm. (From Benchimol 2000)...
Enhanced imaging of several dairy products has been demonstrated through the application of a relatively elaborate preparative technique in combination with a cold-field emission scanning electron microscope (FESEM) [86], The preparative methods include a metal-impregnation technique, termed tannin-ferrocyanide-osmium (TA-F-O, Figure 21), which was adapted from Hirano et al. [87]. [Pg.270]

FESEM Field emission scanning electron microscopy... [Pg.96]

Rizwan SB, Dong YD, Boyd BJ, Rades T, Hook S (2007) Characterisation of biconti-nuous cubic liquid crystalline systems of phytantriol and water using cryo field emission scanning electron microscopy (cryo FESEM). Micron 38 478M 85... [Pg.50]

Are carbynes produced in laboratory carbon and C IC Ar vapors designed to simulate the properties carbon dust in astrophysical environments Field-emission scanning electron microscope (FESEM) and HRTEM studies of vapor-condensed carbon smokes showed a wide range of carbon morphologies that were free of metal impurities (at EDS detection limits), viz. 1. Ceo and higher fullerenes that agglomerated into amorphous soot grains, 2. fullerenic nanotubes and onions, 3. amorphous carbon sheets,... [Pg.357]

Field emission scanning electron microscopy (FESEM), glancing incidence x-ray diffraction (GIXRD), transmission electron microscopy (TEM), micro Raman scattering, Fourier transform inftaied (FTIR) spectrometry, Rutherford back scattering (RBS) studies and electron probe micro analysis (EPMA) have been carried out to obtain micro-structural and compositional properties of the diamond/p-SiC nanocomposite films. Atomic force microscopy (AFM) and indentation studies have been carried out to obtain film properties on the tribological and mechanical front. [Pg.372]

The brazed Joints were mounted in epoxy, ground, polished, and examined using Field Emission Scanning Electron Microscopy (FESEM) (model Hitachi 4700) coupled with energy dispersive x-ray spectroscopy (EDS). Microhardness scans were made with a Knoop indenter across the joint interfaces on a Struers Duramin-A300 machine under a load of 200 g and loading time of 10 s. Multiple (4 to 6) hardness scans were made across each joint to check the reproducibility. [Pg.495]

Field Emission Scanning Electron Microscopy (FESEM)... [Pg.128]

See other pages where FESEM scanning electron is mentioned: [Pg.187]    [Pg.187]    [Pg.218]    [Pg.217]    [Pg.172]    [Pg.190]    [Pg.84]    [Pg.530]    [Pg.571]    [Pg.135]    [Pg.241]    [Pg.110]    [Pg.217]    [Pg.947]    [Pg.243]    [Pg.74]    [Pg.243]    [Pg.199]    [Pg.292]    [Pg.486]    [Pg.494]    [Pg.554]    [Pg.530]    [Pg.557]    [Pg.571]    [Pg.75]    [Pg.128]    [Pg.95]    [Pg.46]    [Pg.580]    [Pg.428]   


SEARCH



Field effect scanning electron microscopy FESEM)

Field emission scanning electron microscopes FESEM)

Field emission scanning electron microscopy, FESEM

Scanning electron microscopy FESEM

© 2024 chempedia.info