Field emission scanning electron microscopes FESEM

Field emission devices, 17 49-50 Field emission FPDs (FEDs), 22 259 Field emission microscope (FEM), 16 503 Field emission microscopy (FEM), 24 74 Field emission scanning electron microscope (FESEM), 16 492 Field emission scanning electron... 

Enhanced imaging of several dairy products has been demonstrated through the application of a relatively elaborate preparative technique in combination with a cold-field emission scanning electron microscope (FESEM) [86], The preparative methods include a metal-impregnation technique, termed tannin-ferrocyanide-osmium (TA-F-O, Figure 21), which was adapted from Hirano et al. [87]. 

Are carbynes produced in laboratory carbon and C IC Ar vapors designed to simulate the properties carbon dust in astrophysical environments Field-emission scanning electron microscope (FESEM) and HRTEM studies of vapor-condensed carbon smokes showed a wide range of carbon morphologies that were free of metal impurities (at EDS detection limits), viz. 1. Ceo and higher fullerenes that agglomerated into amorphous soot grains, 2. fullerenic nanotubes and onions, 3. amorphous carbon sheets,... 

SEM is used to probe microstructural features from 10 nm- 1 tim A Field Emission Scanning Electron Microscope (FESEM) allows imaging of many non-conductive materials at relatively low voltages (200 eV - 30 keV) witiiout applying a conductive coating. An energy dispersive x-ray spectrometer (EDS)... 

Figure 1. Photograph (left) and field emission scanning electron microscopic (FESEM) image (right) of PS colloidal monolayer on the glass substrate.

Field Emission Scanning Electron Microscope (FESEM)... 

Flgnre 3.15 Mild steel A37 after exposure in flowing S-CO2 at 400°C (a) Field Emission Scanning Electron Microscope (FESEM) cross-section—80 bar for 350 h (b) Glow Discharge Optical Emission Spectrometer (GDOES) profile of surface—250 bar for 350 h. 

The imaging of polymer patterns was performed by Field Emission Scanning Electron Microscope (FESEM, JSM-7401E, HiOL ltd.). Figure 7 presents the FESEM images of PS/PAA blends spin-coated on MHDA/BZT patterned gold template at 70/30, 50/50 and 30/70 composition ratios. The PS/PAA blend with 70/30 ratio... 

A LEO 1530 field emission scanning electron microscope (FESEM) was employed to investigate the dispersion state of the nanocomposites. The electrical conductivities were measured in accordance with the ASTM D4496 standard along the flow directions of the tensile bars (cf Figure 1). Fach sample was cut at different locations while maintaining a constant thickness. Both ends of the sample parallel to the flow direction were then coated with conductive carbon paint, and the resistance was measured from the center. The electrical conductivity (p) was then calculated using Equation 1 ... 

Five wt% MWNT-filled polycarbonate composites (untreated and treated) were prepared through a solution method described elsewhere [23] and compression molded at 220°C under a pressure of 1 ton for 40 minutes to produce samples with a dog-bone geometry and dimensions W x W x Vi The samples were tensile stretched on an Instron machine in liquid nitrogen. This created a sharp fracture surface. Some samples were coated with gold and examined in a field emission scanning electron microscope (FESEM) under 12 kV. 

---