Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Equilibrium constants metal ions

Once the stoichiometry of the complex has been established, the stability constant(s) can be calculated, provided the data yields a curve showing some dissociation in the neighborhood of the stoichiometric point (curve B in Figure 22-12). Briefly, for any data point in the region of curvature, complex formation did not proceed to completion, as evidenced from the difference between the measured curve and the "theoretical" one. Here there is obviously an equilibrium between metal ion, ligand and complex, and from each data point a value of the stability constant can be calculated. [Pg.360]

The Universal Force Field, UFF, is one of the so-called whole periodic table force fields. It was developed by A. Rappe, W Goddard III, and others. It is a set of simple functional forms and parameters used to model the structure, movement, and interaction of molecules containing any combination of elements in the periodic table. The parameters are defined empirically or by combining atomic parameters based on certain rules. Force constants and geometry parameters depend on hybridization considerations rather than individual values for every combination of atoms in a bond, angle, or dihedral. The equilibrium bond lengths were derived from a combination of atomic radii. The parameters [22, 23], including metal ions [24], were published in several papers. [Pg.350]

Perhaps the most extensively studied catalytic reaction in acpreous solutions is the metal-ion catalysed hydrolysis of carboxylate esters, phosphate esters , phosphate diesters, amides and nittiles". Inspired by hydrolytic metalloenzymes, a multitude of different metal-ion complexes have been prepared and analysed with respect to their hydrolytic activity. Unfortunately, the exact mechanism by which these complexes operate is not completely clarified. The most important role of the catalyst is coordination of a hydroxide ion that is acting as a nucleophile. The extent of activation of tire substrate througji coordination to the Lewis-acidic metal centre is still unclear and probably varies from one substrate to another. For monodentate substrates this interaction is not very efficient. Only a few quantitative studies have been published. Chan et al. reported an equilibrium constant for coordination of the amide carbonyl group of... [Pg.46]

The equilibrium constants obtained using the metal-ion induced shift in the UV-vis absorption spectrum are in excellent agreement with the results of the Lineweaver-Burke analysis of the rate constants at different catalyst concentrations. For the copper(II)ion catalysed reaction of 2.4a with 2.5 the latter method gives a value for of 432 versus 425 using the spectroscopic method. [Pg.58]

From the equilibrium constant and the apparent rate constant, the rate constant for reaction of the metal-ion coordinated dienophile can be calculated using equation 2.2 (derived in... [Pg.58]

A quantitative correlation between rate and equilibrium constants for the different metal ions is absent. The observed rate enhancements are a result of catalysis by the metal ions and are clearly not a result of protonation of the pyridyl group, since the pH s of all solutions were within the region where the rate constant is independent of the pH (Figure 2.1). [Pg.59]

Catalysis by the four metal ions was also compared with respect to their sensitivity towards substituents in the dienophile. To this end the equilibrium constants for complexation of2.4a-g to the four different ions were determined. The results are shown in Table 2.6. [Pg.59]

Table 2.6. Equilibrium constants from complexation of 2.4a, 2.4b, and 2.4d to different metal ions (Kj) and second-order rate constants for the Diels-Alder reaction of these complexes with 2 (%cd) in water at 2.00 M ionic strength and 25°C. ... Table 2.6. Equilibrium constants from complexation of 2.4a, 2.4b, and 2.4d to different metal ions (Kj) and second-order rate constants for the Diels-Alder reaction of these complexes with 2 (%cd) in water at 2.00 M ionic strength and 25°C. ...
So far the four metal ions have been compared with respect to their effect on (1) the equilibrium constant for complexation to 2.4c, (2) the rate constant of the Diels-Alder reaction of the complexes with 2.5 and (3) the substituent effect on processes (1) and (2). We have tried to correlate these data with some physical parameters of the respective metal-ions. The second ionisation potential of the metal should, in principle, reflect its Lewis acidity. Furthermore the values for Iq i might be strongly influenced by the Lewis-acidity of the metal. A quantitative correlation between these two parameters... [Pg.60]

Figure 2.6. Hammett plots for the equilibrium constant of binding of 2.4 to Co, NL, Cu and (open symbols), and for the rate constants of reaction of the metal-ion - 2.4 complex with 2.5 (solid symbols). Figure 2.6. Hammett plots for the equilibrium constant of binding of 2.4 to Co, NL, Cu and (open symbols), and for the rate constants of reaction of the metal-ion - 2.4 complex with 2.5 (solid symbols).
Table 3.1 summarises the influence of the diamine ligands on the equilibrium constant for binding of 3.8c to the ligand-metal ion complex (K ) and the second-order rate constant for reaction of the ternary complex (ICjat) (Scheme 3.5) with diene 3.9. [Pg.83]

The equilibrium constant for a reaction in which a metal—ligand complex dissociates to form uncomplexed metal ion and ligand (Kd). [Pg.144]

The product is equal to the equilibrium constant X for the reaction shown in equation 30. It is generally considered that a salt is soluble if > 1. Thus sequestration or solubilization of moderate amounts of metal ion usually becomes practical as X. approaches or exceeds one. For smaller values of X the cost of the requited amount of chelating agent may be prohibitive. However, the dilution effect may allow economical sequestration, or solubilization of small amounts of deposits, at X values considerably less than one. In practical appHcations, calculations based on concentration equihbrium constants can be used as a guide for experimental studies that are usually necessary to determine the actual behavior of particular systems. [Pg.391]

Most biological environments contain substantial amounts of divalent and monovalent metal ions, including Mg, Ca, Na, K, and so on. What effect do metal ions have on the equilibrium constant for ATP hydrolysis and the... [Pg.77]

Through all these calculations of the effect of pH and metal ions on the ATP hydrolysis equilibrium, we have assumed standard conditions with respect to concentrations of all species except for protons. The levels of ATP, ADP, and other high-energy metabolites never even begin to approach the standard state of 1 M. In most cells, the concentrations of these species are more typically 1 to 5 mM or even less. Earlier, we described the effect of concentration on equilibrium constants and free energies in the form of Equation (3.12). For the present case, we can rewrite this as... [Pg.78]

It should be noted that whereas a completely soluble hydroxide (e.g. NaOH) will give a solution of high pH in which the pH will increase with concentration of the hydroxide, the pH of a solution of a sparingly soluble hydroxide will depend upon the equilibrium constant for hydrolysis and the activity of metal ions. [Pg.161]

Now look at the numerical values of the equilibrium constants. The K s listed range from 10+1 to 10 16, so we see there is a wide variation. We want to acquire a sense of the relation between the size of the equilibrium constant and the state of equilibrium. A large value of K must mean that at equilibrium there are much larger concentrations present of products than of reactants. Remember that the numerator of our equilibrium expression contains the concentrations of the products of the reaction. The value of 2 X 10,s for the K for reaction (19) certainly indicates that if a reaction is initiated by placing metallic copper in a solution containing Ag+ (for example, in silver nitrate solution), when equilibrium is finally reached, the concentration of Cu+2 ion, [Cu+2], is very much greater than the square of the silver ion concentration, [Ag+]2. [Pg.154]

In the context of Scheme 11-1 we are also interested to know whether the variation of K observed with 18-, 21-, and 24-membered crown ethers is due to changes in the complexation rate (k ), the decomplexation rate (k- ), or both. Krane and Skjetne (1980) carried out dynamic 13C NMR studies of complexes of the 4-toluenediazo-nium ion with 18-crown-6, 21-crown-7, and 24-crown-8 in dichlorofluoromethane. They determined the decomplexation rate (k- ) and the free energy of activation for decomplexation (AG i). From the values of k i obtained by Krane and Skjetne and the equilibrium constants K of Nakazumi et al. (1983), k can be calculated. The results show that the complexation rate (kx) does not change much with the size of the macrocycle, that it is most likely diffusion-controlled, and that the large equilibrium constant K of 21-crown-7 is due to the decomplexation rate constant k i being lower than those for the 18- and 24-membered crown ethers. Izatt et al. (1991) published a comprehensive review of K, k, and k data for crown ethers and related hosts with metal cations, ammonium ions, diazonium ions, and related guest compounds. [Pg.299]

As shown in Fig. 33, the decreasing mechanism of this fluctuation is summarized as follows At a place on the electrode surface where metal dissolution happens to occur, the surface concentration of the metal ions simultaneously increases. Then the dissolved part continues to grow. Consequently, as the concentration gradient of the diffusion layer takes a negative value, the electrochemical potential component contributed by the concentration gradient increases. Here it should be noted that the electrochemical potential is composed of two components one comes from the concentration gradient and the other from the surface concentration. Then from the reaction equilibrium at the electrode surface, the electrochemical potential must be kept constant, so that the surface concentration component acts to compensate for the increment of the concen-... [Pg.270]

Even though the equilibrium constant for the formation of Au3- from gold is very unfavorable, the reaction proceeds because any Au3+ ions formed are immediately complexed by Cl- ions and removed from the equilibrium. In a process widely used in the refining of the metal, gold also reacts with sodium cyanide in an aerated aqueous solution to form the complex ion [Au(CN)2] ... [Pg.787]

Use the information in Appendix 2B to determine the equilibrium constant for the disproportionation of copper(l) ions in aqueous solution at 25°C to copper metal and copper(ll) ions. [Pg.817]

In the introductory chapter we stated that the formation of chemical compounds with the metal ion in a variety of formal oxidation states is a characteristic of transition metals. We also saw in Chapter 8 how we may quantify the thermodynamic stability of a coordination compound in terms of the stability constant K. It is convenient to be able to assess the relative ease by which a metal is transformed from one oxidation state to another, and you will recall that the standard electrode potential, E , is a convenient measure of this. Remember that the standard free energy change for a reaction, AG , is related both to the equilibrium constant (Eq. 9.1)... [Pg.176]

In aqueous solutions at pH 7, there is little evidence of complex formation between [MesSnflV)] and Gly. Potentiometric determination of the formation constants for L-Cys, DL-Ala, and L-His with the same cation indicates that L-Cys binds more strongly than other two amino acids (pKi ca. 10,6, or 5, respectively). Equilibrium and spectroscopic studies on L-Cys and its derivatives (S-methyl-cystein (S-Me-Cys), N-Ac-Cys) and the [Et2Sn(IV)] system showed that these ligands coordinate the metal ion via carboxylic O and the thiolic 5 donor atoms in acidic media. In the case of S-Me-Cys, the formation of a protonated complex MLH was also detected, due to the stabilizing effect of additional thioether coordination. ... [Pg.365]


See other pages where Equilibrium constants metal ions is mentioned: [Pg.242]    [Pg.39]    [Pg.257]    [Pg.370]    [Pg.67]    [Pg.82]    [Pg.83]    [Pg.84]    [Pg.139]    [Pg.141]    [Pg.174]    [Pg.175]    [Pg.20]    [Pg.144]    [Pg.771]    [Pg.49]    [Pg.343]    [Pg.16]    [Pg.23]    [Pg.91]    [Pg.224]    [Pg.397]    [Pg.297]    [Pg.364]    [Pg.257]   
See also in sourсe #XX -- [ Pg.241 ]




SEARCH



Constants, metals

Equilibrium constant for binding of metal ions

Ion equilibria

Metal ions constant

© 2024 chempedia.info