Epoxies properties

In response to the simultaneous needs for improving epoxy properties and decreasing the cost of polyimide based materials, several approaches have been attempted to combine the two. The physical addition of polyimide to epoxy has been limited by the fundamental immiscibility of polymers containing imide... [Pg.110]

Uses Defoamer for paints, elastomeric coatings, aq. epoxies Properties Liq. [Pg.203]

Chem. Descrip. POE polyamine Uses Curing agent, modifier, flexibilizer for epoxies Properties Lt. yel. liq. water-sol. vise. 60 cps Jeffamine ED-2003 [Huntsman]... [Pg.445]

Uses Defoamer, air release agent for petrol, solv.-based paints, e.g., NC, PU, PE, alkyds, epoxy Properties Liq. [Pg.617]

Uses Antisettling agent for nonaq. decorative and house paints suspending agent for nonpolar solv. paints, suitable for all ds, epoxies Properties Gardner 2 liq. dens. 8.7 Ib/gal vise. 55 cps VOC12.8% (EPA Method 24) 47% act., 42% solids, 42.71% water Use Level 0.1-1.0% (on finished paint)... [Pg.855]

Chem. Descrip. Triphenyl phosphite CAS 101-02-0 EINECS/ELINCS 202-908-4 Uses Stabilizer for styrenics, engineering thennoplastics, polyesters (to regulate vise., improve color stability), polyolefins (as catalyst adjuvant), PU (to prevent scorching during curing and improve color stability), epoxies, PVC, coatings, adhesives antioxidant for epoxies Properties APHA 50 max. clear liq. m.w. 310 sp.gr. 1.180-1.186 (25/... [Pg.928]

The variety of finishes is so wide, that their uses will be described later in detail, while the characteristic epoxy properties will be more easily understood when the resin structures are seen. Let us proceed to the resins. [Pg.176]

Techniques Used to Study the Curing Reaction and Epoxy Properties... [Pg.490]

CEMl Epoxy Paper + glass Punchable epoxy, properties between XXXPC and FR4 Used extensively in consumer items, e.g. radios, smoke detectors low-cost substitute for FR4 in single-sided wiring... [Pg.282]

A full, finite-element analysis of an adhesively bonded butt joint with rigid adherends has been performed to investigate the range of applicability of the asymptotic solutions. The failure load and epoxy properties used in these calculations are the same as those used in the small-scale yielding calculations for steel-epoxy adhesively bonded butt joints presented above (i.e. E = 3.5 GPa,... [Pg.171]

The actual change in die cured epoxy properties is dependent on the level of LP used. In general, elongation, impact resistance, and tensile strength ineiease with increasing LP level, while brittleness decreases. [Pg.320]

Uses Corrosion inhibitor for metalworking fluids antistat flotation collector additive for fuel, lubricant, petrol, refining intermediate for surfactants, textile foamers, ethoxylates and agric, chem, crosslinking agent for epoxies Properties Gardner 5 max, cl, liq, ammoniacal odor insol. in water m.w. 272 sp.gr. 0.85 vise. 6cSt fp, 50f b,p,400 F min, pour pt, 50 F amine no. 195-215 flash pt. (PMCC) 201 F... [Pg.823]

Uses Antiflo ing agent particularly effective in alkyds and epoxies Properties Liq. [Pg.1448]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...