Epoxides Sharpless titanium

M. G. Finn, K. B, Sharpless, Epoxidation with Titanium-Tartrate Catalysts in Asymmetric Synthesis, J. D. Morrison, Ed.. Vol. 5, pp 269-271, Academic, New York 1985. 

Finn, F M, Hofmann, K 1976, in Neurath, H, Hill, R L (eds), The Proteins, 3rd edn, Vol II, chapter 2(p 106—237), Academic Press New York London Finn, M G, Sharpless, fC. B 1985, On the Mechanism of Asymmetric Epoxidation with Titanium-Tartrate Catalysts, in Momson, J D (ed), Asymmetric Synthesis, Vol 5 Chiral Catalysis chapter 8, p 247, Academic Press New York Fischer, E 1914, Chem Ber 47,196 Fischer, H, Slangier G 1927, Liebigs, Ann Chem 459, 53 Fischer, H Neber, M 1932. Liebigs Ann Chem 496,1... 

B. E. Rossiter (1985). Synthetic aspects and application of asymmetric epoxidation , in Asymmetric Synthesis. Ed. J. Morrison. Orlando Academic Press, p. 194 M. G. Finn and K. B. Sharpless On the mechanism of asymmetric epoxidation with titanium-tartrate catalysts . Ibid., p. 247. 

Asymmetric epoxidation. Sharpless et a .1 have reviewed the numerous applications of titanium-catalyzed asymmetric epoxidations developed in their own and other laboratories. All the reactions conform to the enantiomeric selectivity first observed and formulated as in Scheme (I). 

There are many synthetic applications of epoxide formation. Titanium alkoxides in the presence of diethyltartrate as a chiral ligand catalyze the epoxidation of allylic alcohols enantioselectively (Sharpless reaction). In the presence of singlet... 

Whilst the Sharpless epoxidation with titanium catalysts and the Jacobsen-Katsuki epoxidation with manganese(salen) complexes are at the forefront of enantioselec-tive epoxidation with metal catalysts, there are alternative systems available. Ruthenium pyridinebisoxazoline (PYBOX) complexes have been independently reported, using either phenyliodinium diacetate or sodium periodate as... 

Kagan and Pitchen ° and Modena and coworkers independently reported the oxidation of sulfides to sulfoxides using modified Sharpless epoxidation catalyst (titanium/diethyl tartrate). By 1987, Kagan had already reported a catalytic variation of the reaction and an improved catalytic system allows for the use of lower (10 mol%) loading of catalyst. For example, sulfide (5.143) undergoes sulfoxidation with good enantioselectivity. An alternative catalyst based on Ti(0 Pr)4 and BINOL is also effective for sulfoxidation, providing up to 96% ee. ... 

Finn MG, Sharpless KB (1985) On the mechanism of asymmetric epoxidation with titanium-tartrate catalysts. In Scott JW, Morrison JD (eds) Asymmetric Synthesis, vol 5. Academic Press, Orlando, p 247... 

Finn MG, Sharpless KB (1985) On the mechanism of asymmetric epoxidation with titanium-... 

Sharp less asymmetric epoxidation (Section 12.15) An enantioselec-tive oxidation reaction that converts the double bond of an aUyUc alcohol to a predictable enantiomeiicaUy enriched epoxide. Sharpless reagent (Section 12.15) The reagent used in the Sharpless asymmetric epoxidation. The Sharpless reagent consists of tert-butyl hydroperoxide, a titanium catalyst, and one enantiomer of diethyl tartrate. 

Unsaturated chiral a-hydroxy esters are of interest due to possible reactions with the carbon double bond. They can easily be obtained from optically active cyanohydrins according to the Pinner method [35a]. Epoxidation of the chiral alcohols 9 with achiral oxidants, e.g., m-chloroperoxybenzoic acid (m-CPBA), yields a mixture of both possible epoxides 10a and 10b. With chiral (Sharpless titanium tartrate system) oxidants stereoselective epoxidation results. Using (+) dimethyl tartrate [(+) DMT] only the erythro isomer 10a is obtained (Scheme 6) [35b]. 

The first practical method for asymmetric epoxidation of primary and secondary allylic alcohols was developed by K.B. Sharpless in 1980 (T. Katsuki, 1980 K.B. Sharpless, 1983 A, B, 1986 see also D. Hoppe, 1982). Tartaric esters, e.g., DET and DIPT" ( = diethyl and diisopropyl ( + )- or (— )-tartrates), are applied as chiral auxiliaries, titanium tetrakis(2-pro-panolate) as a catalyst and tert-butyl hydroperoxide (= TBHP, Bu OOH) as the oxidant. If the reaction mixture is kept absolutely dry, catalytic amounts of the dialkyl tartrate-titanium(IV) complex are suflicient, which largely facilitates work-up procedures (Y. Gao, 1987). Depending on the tartrate enantiomer used, either one of the 2,3-epoxy alcohols may be obtained with high enantioselectivity. The titanium probably binds to the diol grouping of one tartrate molecule and to the hydroxy groups of the bulky hydroperoxide and of the allylic alcohol... 

The Sharpless-Katsuki asymmetric epoxidation reaction (most commonly referred by the discovering scientists as the AE reaction) is an efficient and highly selective method for the preparation of a wide variety of chiral epoxy alcohols. The AE reaction is comprised of four key components the substrate allylic alcohol, the titanium isopropoxide precatalyst, the chiral ligand diethyl tartrate, and the terminal oxidant tert-butyl hydroperoxide. The reaction protocol is straightforward and does not require any special handling techniques. The only requirement is that the reacting olefin contains an allylic alcohol. 

In 1980, Katsuki and Sharpless communicated that the epoxidation of a variety of allylic alcohols was achieved in exceptionally high enantioselectivity with a catalyst derived from titanium(IV) isopropoxide and chiral diethyl tartrate. This seminal contribution described an asymmetric catalytic system that not only provided the product epoxide in remarkable enantioselectivity, but showed the immediate generality of the reaction by examining 5 of the 8 possible substitution patterns of allylic alcohols all of which were epoxidized in >90% ee. Shortly thereafter. Sharpless and others began to illustrate the... 

A model for the catalytically active species in the Sharpless epoxidation reaction is formulated as a dimer 3, where two titanium centers are linked by two chiral tartrate bridges. At each titanium center two isopropoxide groups of the original tetraisopropoxytitanium-(IV) have been replaced by the chiral tartrate ligand ... 

The emergence of the powerful Sharpless asymmetric epoxida-tion (SAE) reaction in the 1980s has stimulated major advances in both academic and industrial organic synthesis.14 Through the action of an enantiomerically pure titanium/tartrate complex, a myriad of achiral and chiral allylic alcohols can be epoxidized with exceptional stereoselectivities (see Chapter 19 for a more detailed discussion). Interest in the SAE as a tool for industrial organic synthesis grew substantially after Sharpless et al. discovered that the asymmetric epoxidation process can be conducted with catalytic amounts of the enantiomerically pure titanium/tartrate complex simply by adding molecular sieves to the epoxidation reaction mix-... 

Allylic alcohols can be converted to epoxy-alcohols with tert-butylhydroperoxide on molecular sieves, or with peroxy acids. Epoxidation of allylic alcohols can also be done with high enantioselectivity. In the Sharpless asymmetric epoxidation,allylic alcohols are converted to optically active epoxides in better than 90% ee, by treatment with r-BuOOH, titanium tetraisopropoxide and optically active diethyl tartrate. The Ti(OCHMe2)4 and diethyl tartrate can be present in catalytic amounts (15-lOmol %) if molecular sieves are present. Polymer-supported catalysts have also been reported. Since both (-t-) and ( —) diethyl tartrate are readily available, and the reaction is stereospecific, either enantiomer of the product can be prepared. The method has been successful for a wide range of primary allylic alcohols, where the double bond is mono-, di-, tri-, and tetrasubstituted. This procedure, in which an optically active catalyst is used to induce asymmetry, has proved to be one of the most important methods of asymmetric synthesis, and has been used to prepare a large number of optically active natural products and other compounds. The mechanism of the Sharpless epoxidation is believed to involve attack on the substrate by a compound formed from the titanium alkoxide and the diethyl tartrate to produce a complex that also contains the substrate and the r-BuOOH. ... 

Asymmetric epoxidation is another important area of activity, initially pioneered by Sharpless, using catalysts based on titanium tetraisoprop-oxide and either (+) or (—) dialkyl tartrate. The enantiomer formed depends on the tartrate used. Whilst this process has been widely used for the synthesis of complex carbohydrates it is limited to allylic alcohols, the hydroxyl group bonding the substrate to the catalyst. Jacobson catalysts (Formula 4.3) based on manganese complexes with chiral Shiff bases have been shown to be efficient in epoxidation of a wide range of alkenes. 

The enantioselective epoxidation method developed by Sharpless and co-workers is an important asymmetric transformation known today. This method involves the epoxidation of allylic alcohols with fcrt-butyl hydroperoxide and titanium (sopropoxide in the presence of optically active pure tartarate esters, see Eqn. (25). 

The epoxidation of allylic alcohols can also be effected by /-butyl hydroperoxide and titanium tetraisopropoxide. When enantiomerically pure tartrate ligands are included, the reaction is highly enantioselective. This reaction is called the Sharpless asymmetric epoxidation.55 Either the (+) or (—) tartrate ester can be used, so either enantiomer of the desired product can be obtained. 

Sharpless epoxidation involves treating an allylic alcohol with titanium(IV) tetraisopropoxide [Ti(0-/Pr)4], tert-butyl hydroperoxide [t-BuOOH], and a specific enantiomer of a tartrate ester. 

The scope of metal-mediated asymmetric epoxidation of allylic alcohols was remarkably enhanced by a new titanium system introduced by Katsuki and Sharpless epoxidation of allylic alcohols using a titanium(IV) isopropoxide, dialkyl tartrate (DAT), and TBHP (TBHP = tert-butyl-hydroperoxide) proceeds with high enantioselectivity and good chemical yield, regardless of... 

These epoxide-opening conditions were originally developed by Sharpless and coworkers for the regiocontrolled opening of 2,3-epoxy alcohols [30]. It has been proposed that ligand exchange of the substrate with isopropoxide forms a covalently bound substrate-titanium complex (Chart 3.3). Nucleophilic attack on this complex at the 3-position is favored over attack at the 2-position. In the case of 49,... 

The use of alkylhydroperoxides as epoxidizing agents for allylic alcohols under catalytic conditions was soon expanded into enantioselective epoxidation with use of the more mild titanium alkoxides in the presence of chiral tartaric esters116. As concerns the epoxidation of functionalized dienes, these now so-called Sharpless conditions [Ti(OPr )4, dialkyl tartrate, TBHP] have been utilized to enantioselectively epoxidize 1,4-pentadiene-... 

Since its discovery in 1980,7 the Sharpless expoxidation of allylic alcohols has become a benchmark classic method in asymmetric synthesis. A wide variety of primary allylic alcohols have been epoxidized with over 90% optical yield and 70-90% chemical yield using TBHP (r-BuOOH) as the oxygen donor and titanium isopropoxide-diethyl tartrate (DET, the most frequently used dialkyl tartrate) as the catalyst. One factor that simplifies the standard epoxidation reaction is that the active chiral catalyst is generated in situ, which means that the pre-preparation of the active catalyst is not required. 

The asymmetric dihydroxylation protocol was the second massive contribution by Professor Barry Sharpless to synthetic organic chemistry. The first procedure, introduced with Katsuki, involves the catalytic asymmetric epoxida-tion of allylic alcohols. A typical example is shown in Scheme 17, wherein ( )-allylic alcohol (23) is epoxidized with tert-b utyl hyd roperox ide, in the presence of titanium tetra-isopropoxide and optically active diethyl tartrate to give the... 

In 1980, Katsuki and Sharpless[1] reported that, with the combination of a titanium(IV) alkoxide, an enantiomerically pure tartrate ester [for example (+)-diethyl tartrate ((+)-DET) or (+) di-iso-propyltartrate ((+)-DIPT)] and tert-butyl hydroperoxide, they were able to carry out the epoxidation of a variety of allylic alcohols in good yield and with a good enantiomeric excess (Figure 5.1). 

In 1990, Choudary [139] reported that titanium-pillared montmorillonites modified with tartrates are very selective solid catalysts for the Sharpless epoxidation, as well as for the oxidation of aromatic sulfides [140], Unfortunately, this research has not been reproduced by other authors. Therefore, a more classical strategy to modify different metal oxides with histidine was used by Moriguchi et al. [141], The catalyst showed a modest e.s. for the solvolysis of activated amino acid esters. Starting from these discoveries, Morihara et al. [142] created in 1993 the so-called molecular footprints on the surface of an Al-doped silica gel using an amino acid derivative as chiral template molecule. After removal of the template, the catalyst showed low but significant e.s. for the hydrolysis of a structurally related anhydride. On the same fines, Cativiela and coworkers [143] treated silica or alumina with diethylaluminum chloride and menthol. The resulting modified material catalyzed Diels-Alder reaction between cyclopentadiene and methacrolein with modest e.s. (30% e.e.). As mentioned in the Introduction, all these catalysts are not yet practically important but rather they demonstrate that amorphous metal oxides can be modified successfully. 

---