Engine coolants tests

Mercer, A. D., Laboratory Research in the Development and Testing of Inhibited Coolants in Boiling Heat Transfer Conditions , in Engine Coolant Testing Slate of the Art 1979. ASTM STP 705, W. H. Ailor, ed., 53-80 (1980)... [Pg.1092]

Beal, R. E., Testing of Solder for Corrosion by Engine Coolants, Engine Coolant Testing State of the Art, ASTM STP 705, 1980, pp. 327-355. [Pg.579]

Engine Coolant Testing Second Symposium, ASTM STP 887, R. E. Beal, Ed., ASTM International, West Conshohocken, PA, 1984. [Pg.685]

S.M. Woodward, A. V. Gershun, Characterisation of used engine coolant by statistical analysis , in R.E. Beal (ed). Engine Coolant Testing 3rd Volume, ASTM STP 1192 American Society for Testing and Materials, Philadelphia (1993) pp. 234—247. [Pg.452]

RI,. Chance, Electrochemical Corrosion of an Alu-minum Alloy in Cavitating Ediylene Glycol Solutions, p r presented at the Intemational Sympo-sium on State of the Art Engine Coolant Testing, April 1979, (Atlanta, GA), ASTM... [Pg.96]

Worldwide Trends in Engine Coolants, Cooling System Materials, and Testing SP-811, Society of Automotive Engineers, Warrendale, Pa., 1990. [Pg.193]

ASTM Committee D-15 on Engine Coolants (Minutes), Memphis, Term., American Society of Testing and Materials, Philadelphia, Pa., 1990. [Pg.193]

In the UK, a standard for describing minimum requirements for inhibited engine coolants is provided by BS 6580 . (Test methods are described in BS 5117.)... [Pg.789]

Examples of various vibratory test procedures for studying cavitation-erosion of metals in inhibited engine coolants have been given in an ASTM Special Technical Publication... [Pg.1057]

The three types of test procedure discussed in this chapter may often be identified in testing of inhibitors or inhibited products. The testing of inhibited engine coolants provides a suitable example. [Pg.1083]

Testing corrosion inhibiting, engine coolant concentrate ( antifreeze )... [Pg.1097]

D 1384 1987 Method for corrosion test for engine coolants in glassware... [Pg.1099]

D 2570 1985 Method for simulated service corrosion testing of engine coolants... [Pg.1099]

D 2758 1986 Method of testing engine coolants by engine dynamometer... [Pg.1099]

D 2809 1989 Test method for cavitation erosion-corrosion characteristics of aluminium pumps with engine coolants... [Pg.1099]

D 2847 1985 Practice for testing engine coolants in car and light truck service... [Pg.1099]

Test method for corrosion of cast aluminium alloys in engine coolants under heat-transfer conditions... [Pg.1100]

Laws have been enacted in many states in an attempt to prevent the sale and distribution of deleterious antifreeze products, such as salt solutions or petroleum coolants. Even ethylene glycol engine coolants must be evaluated by testing and comparison of test results with specifications for engine coolant concentrate, such as ASTM D 3306. These tests ensure desired levels of antifreeze coolant concentrate and inhibitor are available to adequately protect cooling systems against freezing, boilover and corrosion (Fig. 2). [Pg.8]

Select the engine coolant or antirust with care to ensure adequate corrosion protection. Use only those products conforming to recognized standards such as ASTM D 3306 for engine coolant. Additionally, if your vehicle engine contains major cast aluminum components, be certain the engine coolant meets the heat rejection corrosion limits in ASTM specification D 3306 as determined by ASTM Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Transfer Conditions (D 4340). [Pg.10]

Inspection and Test. Before installing any engine coolant, the cooling system should be inspected and necessary service work completed. The essential Spring and Fall cooling system service [5] is as follows ... [Pg.12]

Check Accuracy of Tester. Test the instrument with solutions of known freezing protection. A 33% solution of ethylene glycol engine coolant in water protects to 0°F (—18°C) and a 50% solution should indicate —34°F (—37°C) protection. [Pg.14]

Practice for Testing Engine Coolants in Car and Light Truck Service, D 2847, Annual Book of ASTM Standards, Vol. 15.05. [Pg.18]

ASTM (1988) Standard Test Metitod for Foaming Tendencies of Engine Coolants H2. in Glassware, ASTM Designation D1881-86. American Society for Testing and Materials, Philadelphia, PA. [Pg.82]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...