Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Quality control elements

Homogeneity of data. Homogeneous data will be uniform in structure and composition, usually possible to describe with a fixed number of parameters. Homogeneous data is encountered in simple NDT inspection, e.g. quality control in production. Inhomogeneous data will contain various combinations of indications from construction elements, defects and noise sources. An example of inhomogenous data are ultrasonic B-scan images as described in [Hopgood, 1993] or as encountered in the ultrasonic rail-inspection system described later in this paper. [Pg.98]

Quality control elements required by the instrumental analyzer method include analyzer calibration error ( 2 percent of instrument span allowed) verifying the absence of bias introduced by the sampling system (less than 5 percent of span for zero and upscale cah-bration gases) and verification of zero and calibration drift over the test period (less than 3 percent of span of the period of each rim). [Pg.2200]

Several methods have evolved to achieve, sustain, and improve quality, they are quality control, quality improvement, and quality assurance, which collectively are known as quality management. This trilogy is illustrated in Figure 2.1. Techniques such as quality planning, quality costs, Just-in-time , and statistical process control are all elements of... [Pg.28]

For these reasons alloying elements appear in all the commercial anodes, and very careful quality control is required to keep disadvantageous tramp elements (notably iron and copper) below defined threshold levels. Many anode failures can be attributed to poor production quality control. A guide to minimum quality standards has been produced ... [Pg.119]

Typical applications of such methods are the determination of trace elements in (a) the investigation of pollution problems (b) the examination of geological specimens (c) quality control in the manufacture of semiconductors. [Pg.9]

Benoliel MJ. Quevauviller P, Rodrigues E, Andrade ME, Cavaco MA, Cortez L (1997) Certification of reference materials for quality control of major element determinations in ground-water Part i Feasibility study, fresenius J Anal Chem 358 574-580. [Pg.43]

Ihnat M (1994) Development of a new series of agricultural/food reference materials for analytical quality control of elemental determinations. J AOAC Inti 77 1605-1627. [Pg.44]

Kramer KJM, Dorten WS, Groenewoud H van hex, de Haan E, Kramer GN, Monteiro L, Muntau H, Quevauviller Ph (1999) Collaborative study to improve the quality control of rare earth element determinations in environmental matrices. J Environ Monit 1 83-89. [Pg.45]

Quevauviller Ph, Maier EA, Vercoutere K, Muntau H, Griepink B (1992a) Certified reference material (CRM 397) for the quality control of trace element analysis of human hair. Fresenius J Anal Chem 343 335-338. [Pg.47]

Quevauviller Ph, Vercoutere K, Griepink B (1992b) Certified reference materials (CRMs 398 and 399) for the quality control of major element determination in freshwater. Mikrochim Acta 108 195-204. [Pg.47]

Quevauviller Ph, Herzig R. and Muntau H (1996b) Certified reference material of lichen (CRM 482) for the quality control of trace element biomonitoring. Sci Total Environ 187 143-152 Quevauviller Ph, Lachica M., Barahona E, Rauret G, Ure A, Gomez A, and Muntau H (1997) The certification of the EDTA-extractable contents (mass fractions) of Cd, Cr, Ni, Pb, and Zn and of the DTPA-extractable contents (mass fractions) of Cd and Ni in calcareous soil by the extraction procedures given CRM 600. EUR Report 17555 Quevauviller Ph. Maier EA, and Griepink B, eds. (1995) Quality Assurance for Environmental Analysis. Elsevier. Amsterdam. [Pg.108]

Particularly for direct microanalytical techniques using <10 mg of sample for analysis, it is highly desirable to obtain quantitative information on element- and compound-specific homogeneity in the certificates for validation and quality control of measurements. As the mean concentration in a CRM is clearly material-related, the standard deviation of this mean value should represent the element s distribution in this matrix rather than differences in the analytical procedures used. [Pg.130]

Some of the intended categories of use of radioisotopic reference material have been reviewed recently by Fajgelj et al. (1999). They include assignment of property values, establishing the traceability of a measurement result, determining the uncertainty of a measurement result, calibration of an apparatus, assessment of a measurement method, use for recovery studies and use for quality control purposes. It should be noted however that, in general, natural matrix reference materials are not recommended for calibration purposes. This should preferably be done with pure chemical forms of the element labelled with the isotope of interest. Calibrated isotopic sources of this kind are available from a number of commercial suppliers and are not the subject of this review. [Pg.144]

Ihnat M (1998b) Plant and related reference materials for data quality control of elemental content. In Kalra YP (ed.) Handbook of Reference Methods for Plant Analysis pp 235-284. CRC Press, Boca Raton. [Pg.232]

The literature includes a number of mis-matches, the following standing as examples for the many The use of bovine liver and other animal tissues for QC in the analysis of hmnan body fluids should not be considered by analysts. The matrix and the levels of trace elements do not match the levels to be analyzed, which may lead to serious errors. An even more severe mis-use was recently reported by Schuhma-cher et al. (1996) for NIST SRM 1577a Bovine Liver, which was used for QC in the analysis of trace elements in plant materials and soil samples in the vicinity of a municipal waste incinerator. Also recently, Cheung and Wong (1997) described how the quality control for the analysis of trace elements in clams (shellfish) and sediments was performed with the same material NIST SRM 1646, Estuarine sediment. Whilst the selected SRM was appropriate for sediments, its usefulness as a QC tool for clams is difficult to prove see also Chapter 8. This inappropriate use is the more mystifying because a broad selection of suitable shellfish RMs from various producers is available. [Pg.239]

Quality control unit means any person or organizational element designated by the firm to be responsible for the duties relating to quality control. [Pg.7]

Applications X-ray fluorescence is widely used for direct examination of polymeric materials (analysis of additives, catalyst residues, etc.) from research to recycling, through production and quality control, to troubleshooting. Many problems meet the concentration range in which conventional XRF is strong, namely from ppm upwards. Table 8.42 is merely indicative of the presence of certain additive classes corresponding to elemental analysis element combinations are obviously more specific for a given additive. It should be considered that some 60 atomic elements may be found in polymeric formulations. The XRF technique does not provide any structural information about the analytes detected the technique also has limited utility when... [Pg.634]

Applications ICP-MS has become the technique of choice for the determination of elements in a wide range of liquid samples at concentrations in the ng L 1 to [igL-1 range. Typical applications of ICP-MS are multi-element analysis of liquids (even with high solid contents) element speciation by hyphenation to chromatographic techniques continuous on-line gas analysis multi-element trace analysis of polymers and trace analysis in high-purity materials. ICP-MS is routinely used for quality control purposes. [Pg.658]

Aside from market conditions, supply, and demand, four elements (Fig. 12.15) strongly impact the successful commercialization and diffusion of a printed (or other) technology platform into the market (1) standards, (2) awareness, (3) supply chain, and (4) quality control/assurance. Each of these elements is typically addressed prior to commercialization, although these elements are not a prerequisite for success. [Pg.398]


See other pages where Quality control elements is mentioned: [Pg.406]    [Pg.406]    [Pg.707]    [Pg.722]    [Pg.242]    [Pg.815]    [Pg.118]    [Pg.221]    [Pg.228]    [Pg.234]    [Pg.280]    [Pg.24]    [Pg.362]    [Pg.156]    [Pg.319]    [Pg.4]    [Pg.64]    [Pg.112]    [Pg.115]    [Pg.172]    [Pg.218]    [Pg.227]    [Pg.291]    [Pg.1007]    [Pg.1043]    [Pg.83]    [Pg.181]    [Pg.597]    [Pg.666]    [Pg.598]   
See also in sourсe #XX -- [ Pg.292 ]




SEARCH



Control elements

Controlling elements

© 2024 chempedia.info