Electrostatic and magnetic

The double-focusing combination of electrostatic- and magnetic-sector analyzers allows the inherent energy spread of the beam to be compensated for by design and ensures that there is no spread in the beam at the collector. 

Through the use of sequential electric (electrostatic) and magnetic fields (sectors) and various correcting lenses, the ion beam leaving the ion source can be adjusted so that it arrives at the collector in focus and with a rectangular cross-section aligned with the collector slits. For the use of crossed electromagnetic fields. Chapter 25 ( Quadrupole Ion Optics ) should be consulted. 

Electrostatic and Magnetic Effects. These two effects are generally small but may be significant in laboratory weighing. 

The creation terms embody the changes in momentum arising from external forces in accordance with Newton s second law (F = ma). The body forces arise from gravitational, electrostatic, and magnetic fields. The surface forces are the shear and normal forces acting on the fluid diffusion of momentum, as manifested in viscosity, is included in these terms. In practice the vector equation is usually resolved into its Cartesian components and the normal stresses are set equal to the pressures over those surfaces through which fluid is flowing. 

Thomson, W. (1872). Rcprini of Papers on Electrostatics and Magnetism. London Macmillan and Co. 

At the same time, the relatively low energy and ionic character of the chemical bonds between metal and fluorine cause some difficulties in the application of fluoride compounds. First, fluorides typically have a tendency towards thermolysis and hygroscopicity. In addition, fluoride compounds usually display relatively low temperatures of electrostatic and magnetic ordering. 

Physical devices (catalytic devices) for the nonchemical treatment of water and, more specifically, devices for scale prevention that employ magnetic fields have been part of the water treatment marketplace around the world since its earliest days. These devices include electronic, catalytic, electrostatic, and magnetic water treatments. There are also various other types of more recent alternative technologies (to chemical treatments) now available in the marketplace. These are being promoted for use in treating all types of MU water, FW, and BW. 

Double-focusing mass spectrometer A mass spectrometer consisting of electrostatic and magnetic sector analysers capable of achieving high-mass spectral resolution. 

Auger analysis of small features. The primary electron beam column is similar to that in electron microscopes, and it may contain both electrostatic and magnetic lenses for beam focussing as well as quadrupole deflectors for beam steering and octopole lenses for beam shaping. 

In this category, among the molecular, electrostatic and magnetic interparticle bonds, interest is primarily centered on the van der Waals-type attractive forces that may predominate in the absence of liquid and solid bonds. The force of the van der Waals attraction between two spheres of equal size is (R4)... 

In order to understand the nature of mixed-valent compounds one must consider both electrostatic and magnetic interactions between centres which have different oxidation states. Nevertheless, as schematically shown in Figure 14, simple electrostatic effects can help to clarify the so-called Robin-Day classification.24 This is based on the degree of electronic delocalization in (usually binuclear) mixed-valent compounds. 

The ion motion in the cell is complex because of the presence of electrostatic and magnetic trapping fields it consists of three different modes of oscillation. However, the primary mode of interest is the cyclotron motion, whose frequency, v., is directly proportional to the strength of the magnetic field B end inversely proportional to the mass-to-charge ratio m z of the ion v. = kzB/m). 

The metal is most often recovered from its principal ore, zircon. The ore is mined, crushed and preliminary segregation is by gravity, electrostatic, and magnetic separation. Separated ore mixed with carbon is charged into an arc furnace and heated to about 3,500°C. This forms zirconium carbide and silicon monoxide, and the monoxide is driven off as vapor. Zirconium carbide is then placed in a chlorinator and heated with chlorine gas at high temperatures. The carbide is converted to zirconium tetrachloride, ZrCfl. Also, small amounts of hafnium that is always associated with zirconium converts to its tetrachloride, HfCfl. 

A distinction must be made between gravitational effects for which the presence of material in the field does not change the intensity of the field, and the electrostatic and magnetic effects for which the presence of material within the field does alter the intensity. A complete treatment of electrostatic and magnetic effects would require a discussion of electromagnetic theory and the use of Maxwell s equations. However, we wish only to illustrate the thermodynamic effects of electric and magnetic fields. We therefore accept the results of a complete treatment and apply the results to simple systems. 

The basic physics of ion motion in electrostatic and magnetic fields are well understood.20 An ion formed in a magnetic field will acquire a... 

---