Electron transfer voltammetry

Fujita K, Nakamura N, Ohno H, Leigh BS, Niki K, Gray HB, Richards JH (2004) Mimicking protein-protein electron transfer voltammetry of Pseudomonas aeruginosa azurin and the thermus thermophilus Cu-A domain at omega-derivatized self-assembled-monolayer gold electrodes. J Am Chem Soe 126 13954-13961... 

Cyclic voltammetry provides a simple method for investigating the reversibility of an electrode reaction (table Bl.28.1). The reversibility of a reaction closely depends upon the rate of electron transfer being sufficiently high to maintain the surface concentrations close to those demanded by the electrode potential through the Nemst equation. Therefore, when the scan rate is increased, a reversible reaction may be transfomied to an irreversible one if the rate of electron transfer is slow. For a reversible reaction at a planar electrode, the peak current density, fp, is given by... 

In the previous section we saw how voltammetry can be used to determine the concentration of an analyte. Voltammetry also can be used to obtain additional information, including verifying electrochemical reversibility, determining the number of electrons transferred in a redox reaction, and determining equilibrium constants for coupled chemical reactions. Our discussion of these applications is limited to the use of voltammetric techniques that give limiting currents, although other voltammetric techniques also can be used to obtain the same information. 

Determining Equilibrium Constants for Coupled Chemical Reactions Another important application of voltammetry is the determination of equilibrium constants for solution reactions that are coupled to a redox reaction occurring at the electrode. The presence of the solution reaction affects the ease of electron transfer, shifting the potential to more negative or more positive potentials. Consider, for example, the reduction of O to R... 

More recent research provides reversible oxidation-reduction potential data (17). These allow the derivation of better stmcture-activity relationships in both photographic sensitization and other systems where electron-transfer sensitizers are important (see Dyes, sensitizing). Data for an extensive series of cyanine dyes are pubflshed, as obtained by second harmonic a-c voltammetry (17). A recent "quantitative stmcture-activity relationship" (QSAR) (34) shows that Brooker deviations for the heterocycHc nuclei (discussed above) can provide estimates of the oxidation potentials within 0.05 V. An oxidation potential plus a dye s absorption energy provide reduction potential estimates. Different regression equations were used for dyes with one-, three-, five-methine carbons in the chromophore. Also noted in Ref. 34 are previous correlations relating Brooker deviations for many heterocycHc nuclei to the piC (for protonation/decolorization) for carbocyanine dyes the piC is thus inversely related to oxidation potential values. 

A study of the electrochemical oxidation and reduction of certain isoindoles (and isobenzofurans) has been made, using cyclic voltammetry. The reduction wave was found to be twice the height of the oxidation wave, and conventional polarography confirmed that reduction involved a two-electron transfer. Peak potential measurements and electrochemiluminescence intensities (see Section IV, E) are consistent vidth cation radicals as intermediates. The relatively long lifetime of these intermediates is attributed to steric shielding by the phenyl groups rather than electron delocalization (Table VIII). 

Cyclic voltammetry and polarography have been used to study the mechanisms of fluorination and provide an indicator of their relative strengths [92JFC(59)157,92T1595], Two mechanisms have been proposed involving SN2 or electron transfer, although it is likely that which is followed depends on the N—F reagent used. 

Ruthenium, pyrazincbis(pentaammine-electron transfer, 1,360 Ruthenium, tetraamminedichloro-cyclic voltammetry, 1,483 Ruthenium, tetraamminedihalo-cyclic voltammetry, 1,482 Ruthenium, tetrachloronitrido-tetraphenylarsenate stereochemistry, 1, 44 Ruthenium, tris(acetyIacetone)-structure, 1,65... 

Cyclic voltammetry is the most widely used technique for acquiring qualitative information about electrochemical reactions. The power of cyclic voltammetry results from its ability to rapidly provide considerable information on the thermodynamics of redox processes, on the kinetics of heterogeneous electron-transfer reactions, and on coupled chemical reactions or adsorption processes. Cyclic voltammetry is often the first experiment performed in an electroanalytical study. In particular, it offers a rapid location of redox potentials of the electroactive species, and convenient evaluation of the effect of media upon the redox process. 

Substantial loss in sensitivity is expected for analytes with slow electron-transfer kinetics. This may be advantageous for measurements of species with fast electron-transfer kinetics in the presence of a species (e.g., dissolved oxygen) that is irreversible. (For the same reason, the technique is very useful for the study of electron processes.) Theoretical discussions on AC voltammetry are available in the literature (16-18). 

The cleavage mechanism can be clarified by cyclic voltammetries as shown in Figure 5. In aprotic solution (curves a) steps (l) and (2) correspond to the successive electron transfers leading finally to the dianion. On the other hand, in protic solution (curve c), step (2) has disappeared while step (l) has grown and then obviously corresponds to an ECE process. Anyhow, and whatever the medium, step (3) is identified as that in which the produced olefin (here 1,1-diphenylethylene) is reduced in all cases. 

In contrast, aromatic sulphoxides do not need extreme experimental conditions to give a well-defined step in polarography and voltammetry. Thus methyl phenyl sulphoxide (80) exhibits69 a well-defined wave in strongly acidic media at very moderate potential values. The reduction scheme assumes the transient formation of a protonated form prior to the electron transfer ... 

The use of direct electrochemical methods (cyclic voltammetry Pig. 17) has enabled us to measure the thermodynamic parameters of isolated water-soluble fragments of the Rieske proteins of various bci complexes (Table XII)). (55, 92). The values determined for the standard reaction entropy, AS°, for both the mitochondrial and the bacterial Rieske fragments are similar to values obtained for water-soluble cytochromes they are more negative than values measured for other electron transfer proteins (93). Large negative values of AS° have been correlated with a less exposed metal site (93). However, this is opposite to what is observed in Rieske proteins, since the cluster appears to be less exposed in Rieske-type ferredoxins that show less negative values of AS° (see Section V,B). 

Cyclic voltammetry and other electrochemical methods offer important and sometimes unique approaches to the electroactive species. Protein organization and kinetic approaches (Correia dos Santos et al. 1999, Schlereth 1999) can also be studied by electrochemical survey. The electron transfer reaction between cytochrome P450scc is an important system for... 

Fig. 8 Reactions of various carbocations with Kuhn s anion [2 ] as compared with their reduction potentials (peak potentials measured vs. Ag/Ag in acetonitrile by cyclic voltammetry cf. Tables 1 and 8 and Okamoto et al., 1983). SALT, salt formation COV, covalent bond formation ET, single-electron transfer. 

Hyun et al. [345] prepared PbS Q-dots in a suspension and tethered them to Ti02 nanoparticles with a bifunctional thiol-carboxyl linker molecule. Strong size dependence due to quantum confinement was inferred from cyclic voltammetry measurements, for the electron affinity and ionization potential of the attached Q-dots. On the basis of the measured energy levels, the authors claimed that pho-toexcited electrons should transfer efficiently from PbS into T1O2 only for dot diameters below 4.3 nm. Continuous-wave fluorescence spectra and fluorescence transients of the PbS/Ti02 assembly were consistent with electron transfer from small Q-dots. The measured charge transfer time was surprisingly slow ( 100 ns). Implications of this fact for future photovoltaics were discussed, while initial results from as-fabricated sensitized solar cells were presented. 

The large size of redox enzymes means that diffusion to an electrode surface will be prohibitively slow, and, for enzyme in solution, an electrochemical response is usually only observed if small, soluble electron transfer mediator molecules are added. In this chapter, discussion is limited to examples in which the enzyme of interest is attached to the electrode surface. Electrochemical experiments on enzymes can be very simple, involving direct adsorption of the protein onto a carbon or modified metal surface from dilute solution. Protein film voltammetry, a method in which a film of enzyme in direct... 

Early studies of ET dynamics at externally biased interfaces were based on conventional cyclic voltammetry employing four-electrode potentiostats [62,67 70,79]. The formal pseudo-first-order electron-transfer rate constants [ket(cms )] were measured on the basis of the Nicholson method [99] and convolution potential sweep voltammetry [79,100] in the presence of an excess of one of the reactant species. The constant composition approximation allows expression of the ET rate constant with the same units as in heterogeneous reaction on solid electrodes. However, any comparison with the expression described in Section II.B requires the transformation to bimolecular units, i.e., M cms . Values of of the order of 1-2 x lO cms (0.05 to O.IM cms ) were reported for Fe(CN)g in the aqueous phase and the redox species Lu(PC)2, Sn(PC)2, TCNQ, and RuTPP(Py)2 in DCE [62,70]. Despite the fact that large potential perturbations across the interface introduce interferences in kinetic analysis [101], these early estimations allowed some preliminary comparisons to established ET models in heterogeneous media. 

A hanging electrolyte drop has also been applied to determine ionic species in solution using differential-pulse-stripping voltammetry procedures [69]. Particular emphasis was given to assessing the selectivity and sensitivity of the method. The technique of current-scan polarography has also been applied in the study of electron-transfer [70] and coupled electron-transfer-ion-transfer [71,72] reactions at the ITIES in this configuration. 

The voltammograms at the microhole-supported ITIES were analyzed using the Tomes criterion [34], which predicts ii3/4 — iii/4l = 56.4/n mV (where n is the number of electrons transferred and E- i and 1/4 refer to the three-quarter and one-quarter potentials, respectively) for a reversible ET reaction. An attempt was made to use the deviations from the reversible behavior to estimate kinetic parameters using the method previously developed for UMEs [21,27]. However, the shape of measured voltammograms was imperfect, and the slope of the semilogarithmic plot observed was much lower than expected from the theory. It was concluded that voltammetry at micro-ITIES is not suitable for ET kinetic measurements because of insufficient accuracy and repeatability [16]. Those experiments may have been affected by reactions involving the supporting electrolytes, ion transfers, and interfacial precipitation. It is also possible that the data was at variance with the Butler-Volmer model because the overall reaction rate was only weakly potential-dependent [35] and/or limited by the precursor complex formation at the interface [33b]. 

A nickel-promoted C—S bond cleavage has been reported,860 which occurs when solutions of the Ni1 complex of (330) are electrogenerated. The product was identified by cyclic voltammetry and spectroscopy as [Ni(C6H4S2)2]2. EPR and NMR evidence suggests a one-electron mechanism, involving reduction to a 19-electron Ni1 species, electron transfer, and concomitant C—S bond cleavage, extrusion of ethylene followed by a further one-electron reduction and extrusion of ethylene sulfide. 

On the basis of theoretical calculations Chance et al. [203] have interpreted electrochemical measurements using a scheme similar to that of MacDiarmid et al. [181] and Wnek [169] in which the first oxidation peak seen in cyclic voltammetry (at approx. + 0.2 V vs. SCE) represents the oxidation of the leucoemeraldine (1 A)x form of the polymer to produce an increasing number of quinoid repeat units, with the eventual formation of the (1 A-2S")x/2 polyemeraldine form by the end of the first cyclic voltammetric peak. The second peak (attributed by Kobayashi to degradation of the material) is attributed to the conversion of the (1 A-2S")x/2 form to the pernigraniline form (2A)X and the cathodic peaks to the reverse processes. The first process involves only electron transfer, whereas the second also involves the loss of protons and thus might be expected to show pH dependence (whereas the first should not), and this is apparently the case. Thus the second peak would represent the production of the diprotonated (2S )X form at low pH and the (2A)X form at higher pH with these two forms effectively in equilibrium mediated by the H+ concentration. This model is in conflict with the results of Kobayashi et al. [196] who found pH dependence of the position of the first peak. 

The electron transfer between an electrochemically produced perylene dianion and a C02 molecule was also suggested by cyclic voltammetry in a DMF solution.161 Later, perylene was used162 in the photochemical fixation of C02, as a nonmetal electron carrier to C02. 

---