Effects rheological properties

The influence of the composition of asphalt has been recognized, for many years, as being an important factor in controlling the performance of such materials. Furthermore, rheological properties have always been associated with composition but, in order to utilize compositional data effectively, more definitive correlations between composition and properties are needed (46—48). 

Block (Star) Arrangement. The known star polymers, like their linear counterparts, exhibit microphase separation. In general, they exhibit higher viscosities in the melt than their analogous linear materials. Their rheological behavior is reminiscent of network materials rather than linear block copolymers (58). Although they have been used as compatibiUzers in polymer blends, they are not as effective at property enhancements as linear diblocks... 

The properties of PVC may also he expected to depend on the molecular weight distribu n. Most commercial polymers, however, appear to have similar values for MJM and in any case there is little published information on effects of altering the parameter. It is perhaps rather surprising that there appears to be little work reported on the effect of blends of polymers of differing molecular weight on mechanical and rheological properties. 

The solvent-borne NR adhesives show an important mechanical component in the bonding process, and therefore bulk mechanical and rheological properties (addition of fillers is quite effective) are important. In fact, these adhesives are mainly suitable when at least one of the surfaces to be joined is water-porous (paper, concrete, leather, textiles). 

Lopata, V.J., Chung, M., Janke, C.J. and Havens, S.J., Electron curing of epoxy resins initiator and concentration effects on curing dose and rheological properties. 28th Int. SAMPE Technical Conference, 901, 1996. 

Holma, B. (1985). Influence of buffer capacity and pH-dependent rheological properties of respiratory mucus on health effects due to acidic pollution. Set. Total Environ. 41, 101-123. 

Acrylamide polymers are used as multipurpose additives in the oil-producing industry. Introduction of polymers into drilling fluids-drilling muds improves the rheological properties of the fluids in question, positively affects the size of suspended particles, and adds to filterability of well preparation to operation. Another important function is soil structure formation, which imparts additional strength to the well walls. A positive effect is also observed in secondary oil production, where acrylamide polymers additives improve the mobility of aqueous brines injections, which contribute to... 

Kalyan et al. [56] have also studied the effect of alpha-olefin comonomers on the rheological properties and processing of LLDPE. The characteristics of the resins are shown in Table 2. It is found that 1-octene-based LLDPE has the lowest shear viscosity as compared to 1-butene- and 1-hexene-based polymers (Fig. 9). Decrease in power consumption, pressure before the die, temperature in the die, and increase in output has also been found according to shear viscosities of the polymers during tubular film extrusion. 

Industrial production media must also contain sources of potassium, phosphorous and magnesium. Trace elements may also have to be added. The water used for medium preparation will be from the public water supply or other readily available source. The quality of the water is carefully monitored because the presence of certain metal salts, for example, calcium, copper and iron, can have adverse effects on both the growth of the oiganism and the rheological properties of the exopolysaccharides. 

Effect of Filler Particle Size and Shape on the Rheological Properties of Composites... 

Particle size and shape have a strong effect on the rheological properties of materials as well, viscosity among them. 

Particle shape of the filler can also have a significant effect on the rheological properties of filled systems [169,170],... 

Some of these questions have strict and unambiguous answers, in a mathematical model, to other answers are derived from extensive empirical material. The present paper will discuss the problems formulated above, but concerning only rheological properties of filled polymer melts, leaving out the discussion of specific hydrodynamic effects occurring during their flow in channels of different geometrical form. 

The fact that the appearance of a wall slip at sufficiently high shear rates is a property inwardly inherent in filled polymers or an external manifestation of these properties may be discussed, but obviously, the role of this effect during the flow of compositions with a disperse filler is great. The wall slip, beginning in the region of high shear rates, was marked many times as the effect that must be taken into account in the analysis of rheological properties of filled polymer melts [24, 25], and the appearance of a slip is initiated in the entry (transitional) zone of the channel [26]. It is quite possible that in reality not a true wall slip takes place, but the formation of a low-viscosity wall layer depleted of a filler. This is most characteristic for the systems with low-viscosity binders. From the point of view of hydrodynamics, an exact mechanism of motion of a material near the wall is immaterial, since in any case it appears as a wall slip. 

Nikolaeva NE, Sabsai OYu, Fridman ML (1985) Rheological properties of gas-filled polymers and their effects on processing Ser. Pererabotka plastmass. NIITEHIM, Moscow... 

Optical and electro-optical behavior of side-chain liquid crystalline polymers are described 350-351>. The effect of flexible siloxane spacers on the phase properties and electric field effects were determined. Rheological properties of siloxane containing liquid crystalline side-chain polymers were studied as a function of shear rate and temperature 352). The effect of cooling rate on the alignment of a siloxane based side-chain liquid crystalline copolymer was investigated 353). It was shown that the dielectric relaxation behavior of the polymers varied in a systematic manner with the rate at which the material was cooled from its isotropic phase. 

Effects of Fillers on Rheological Properties of Rubber and Rubber Nanocomposites.785... 

EFFECTS OF FILLERS ON RHEOLOGICAL PROPERTIES OF RUBBER AND RUBBER NANOCOMPOSITES... 

---