EDCLY

SC EDC (87C51FC) operates under the conditions of 32 kb program internal memory As to expand the internal memory, additional external IC WM of 2 kb memory is used. 

Keyboard is a contact matrix of dimension 3x4. In order to handle it, the principle of scanning buttons at running zero on input lines is used in SC EDC. 

The operator sets TU on the area to be controlled and puts the button B Under the command of SC EDC impulse of proper value and duration is formed in source controllable current (SCC). 

After the time-varying process has finished and the signal has become stabilized twelve-bit ADT connected with common line of SC EDC starts to work. And 5... 10 is later after start ADT gives digital code of input voltage, and this code is recorded into SC EDC memory. 

The information received is begin processed in SC EDC according to the above-described algorithm, and the final result indicates on LCI. 

If at the moment of controlling there is unreliable contact between electrodes and object being tested or Ac has been discharged till the value of 10.5 V, the emergency signals from Cp 1, Cp 2 go to SC EDC, and LCI indicates proper information. 

Most HCl consumed foi the production of EDC and methyl chloride is recycled acid generated in an integrated process and therefore does not affect net supphes of HCl. The exclusion of HCl consumption for EDC and methyl chloride production gives a better indication of net HCl supply. This figure gives only an order of magnitude of net HCl available for captive consumption and sales. 

Most of the HCl produced is consumed captively, ie, at the site of production, either in integrated operations such as ethylenedichloride—vinyl chloride monomer (EDC/VCM) plants and chlorinated methane plants or in separate HCl consuming operations at the same location. Captive use of anhydrous HCl accounted for 80—85% of the total demand in 1989. The combined merchant market for anhydrous and aqueous HCl in that same year was about 9.1 X 10 metric tons on the basis of 100% HCl (see Table 12) (73). 

Ethylene Dichlonde and Vinyl Chloride. In the United States, all ethylene dichloride [107-60-2] (EDC) is produced from ethylene, either by chlorination or oxychlorination (oxyhydrochlorination). The oxychlorination process is particularly attractive to manufacturers having a supply of by-product HCl, such as from pyrolysis of EDC to vinyl chloride [75-01-4] monomer (VCM), because this by-product HCl can be fed back to the oxychlorination reactor. EDC consumption follows demand for VCM which consumed about 87% of EDC production in 1989. VCM is, in turn, used in the manufacture of PVC resins. Essentially all HCl generated during VCM production is recycled to produce precursor EDC (see Chlorocarbons and Cm OROHYDROCARBONS ViNYLPOLYAffiRS). 

IDG = interest during constmction EDC = escalation during constmction. 

Energy Development Consultants, "Oil Shale in the United States, 1981," EDC, Golden, Colo., 1980. 

Pyrolysis. Vinyl chloride is more stable than saturated chloroalkanes to thermal pyrolysis, which is why nearly all vinyl chloride made commercially comes from thermal dehydrochlorination of EDC. When vinyl chloride is heated to 450°C, only small amounts of acetylene form. Litde conversion of vinyl chloride occurs, even at 525—575°C, and the main products are chloroprene [126-99-8] and acetylene. The presence of HCl lowers the amount of chloroprene formed. 

In a typical balanced plant producing vinyl chloride from EDC, all the HCl produced in EDC pyrolysis is used as the feed for oxychlorination. On this basis, EDC production is about evenly spHt between direct chlorination and oxychlorination, and there is no net production or consumption of HCl. The three principal operating steps used in the balanced process for ethylene-based vinyl chloride production are shown in the block flow diagram in Eigure 1, and a schematic of the overall process for a conventional plant is shown in Eigure 2 (76). A typical material balance for this process is given in Table 2. 

Represents EDC necessary for a stoichiometric balance, including that converted to by-products, but no recycled EDC. 

Direct Chlorination of Ethylene. Direct chlorination of ethylene is generally conducted in Hquid EDC in a bubble column reactor. Ethylene and chlorine dissolve in the Hquid phase and combine in a homogeneous catalytic reaction to form EDC. Under typical process conditions, the reaction rate is controlled by mass transfer, with absorption of ethylene as the limiting factor (77). Ferric chloride is a highly selective and efficient catalyst for this reaction, and is widely used commercially (78). Ferric chloride and sodium chloride [7647-14-5] mixtures have also been utilized for the catalyst (79), as have tetrachloroferrate compounds, eg, ammonium tetrachloroferrate [24411-12-9] NH FeCl (80). The reaction most likely proceeds through an electrophilic addition mechanism, in which the catalyst first polarizes chlorine, as shown in equation 5. The polarized chlorine molecule then acts as an electrophilic reagent to attack the double bond of ethylene, thereby faciHtating chlorine addition (eq. 6) ... 

Oxychlorination of Ethylene. When compared with direct chlorination, the oxychlorination process is characterized by higher capital investment, higher operating costs, and slightly less pure EDC product. However, use of the oxychlorination process is dictated by the need to consume the HCl generated in EDC pyrolysis. 

In oxychlorination, ethylene reacts with dry HCl and either air or pure oxygen to produce EDC and water. Various commercial oxychlorination processes differ from one another to some extent because they were developed independentiy by several different vinyl chloride producers (78,83), but in each case the reaction is carried out in the vapor phase in either a fixed- or fluidized-bed reactor containing a modified Deacon catalyst. Unlike the Deacon process for chlorine production, oxychlorination of ethylene occurs readily at temperatures weU below those requited for HCl oxidation. 

Chlorinated by-products of ethylene oxychlorination typically include 1,1,2-trichloroethane chloral [75-87-6] (trichloroacetaldehyde) trichloroethylene [7901-6]-, 1,1-dichloroethane cis- and /n j -l,2-dichloroethylenes [156-59-2 and 156-60-5]-, 1,1-dichloroethylene [75-35-4] (vinyhdene chloride) 2-chloroethanol [107-07-3]-, ethyl chloride vinyl chloride mono-, di-, tri-, and tetrachloromethanes (methyl chloride [74-87-3], methylene chloride [75-09-2], chloroform, and carbon tetrachloride [56-23-5])-, and higher boiling compounds. The production of these compounds should be minimized to lower raw material costs, lessen the task of EDC purification, prevent fouling in the pyrolysis reactor, and minimize by-product handling and disposal. Of particular concern is chloral, because it polymerizes in the presence of strong acids. Chloral must be removed to prevent the formation of soflds which can foul and clog operating lines and controls (78). 

Oxychlorination reactor feed purity can also contribute to by-product formation, although the problem usually is only with low levels of acetylene which are normally present in HCl from the EDC cracking process. Since any acetylene fed to the oxychlorination reactor will be converted to highly chlorinated C2 by-products, selective hydrogenation of this acetylene to ethylene and ethane is widely used as a preventive measure (78,98—102). 

Direct chlorination usually produces EDC with a purity greater than 99.5 wt %, so that, except for removal of the FeCl, Httle further purification is necessary. Ferric chloride can be removed by adsorption of a sofld, or the EDC can be distilled from the FeCl in a boiling reactor, as noted above. Alternatively, the FeCl can be removed by washing with water, usually in conjunction with EDC from the oxychlorination process. 

EDC from the oxychlorination process is less pure than EDC from direct chlorination and requires purification by distillation. It is usually first washed with water and then with caustic solution to remove chloral and other water-extractable impurities (103). Subsequently, water and low boiling impurities are taken overhead in a first (light ends or heads) distillation column, and finally, pure, dry EDC is taken overhead in a second (heavy ends or product) column (see Fig. 2). 

Unreacted EDC recovered from the pyrolysis product stream contains a variety of cracking by-products. A number of these, eg, trichloroethylene, chloroprene, and benzene, are not easily removed by simple distillation and require additional treatment (78). Chloroprene can build up in the light ends... 

Ethylene Dichloride Pyrolysis to Vinyl Chloride. Thermal pyrolysis or cracking of EDC to vinyl chloride and HCl occurs as a homogenous, first-order, free-radical chain reaction. The accepted general mechanism involves the four steps shown in equations 10—13 ... 

Although there are minor differences in the HCl—vinyl chloride recovery section from one vinyl chloride producer to another, in general, the quench column effluent is distilled to remove first HCl and then vinyl chloride (see Eig. 2). The vinyl chloride is usually further treated to produce specification product, recovered HCl is sent to the oxychlorination process, and unconverted EDC is purified for removal of light and heavy ends before it is recycled to the cracking furnace. The light and heavy ends are either further processed, disposed of by incineration or other methods, or completely recycled by catalytic oxidation with heat recovery followed by chlorine recovery as EDC (76). 

---