Economics consumer

Device Markets. New markets for cardiovascular devices are driven by a least five interrelated factors. Technology, competition, economics, consumer demand, and symbiosis of dmgs and devices all play roles. 

It was pointed out, that the periodical inspection of the steam drums has been become an absolute must especially under the circumstance, that the economical pressure results in smaller wall thickness, higher steam pressure and higher rotation speed. The conventional periodical inspection (hydrotest and visual inside inspection) is on one hand time consuming and therefore expensive and on the other hand the results of the hydrotest are doubtful and can result in a seriously damage of the roundness and balance of the steam drum. 

A catalyst is a material that accelerates a reaction rate towards thennodynamic equilibrium conversion without itself being consumed in the reaction. Reactions occur on catalysts at particular sites, called active sites , which may have different electronic and geometric structures than neighbouring sites. Catalytic reactions are at the heart of many chemical industries, and account for a large fraction of worldwide chemical production. Research into fiindamental aspects of catalytic reactions has a strong economic motivating factor a better understanding of the catalytic process... 

Dry Foods. Dry foods are concentrated sources of nutrition and provide the most economical nutritional value because water in canned foods is expensive. Dry foods tend to scrape the teeth as pets eat, minimizing tartar deposition. When dry food is moistened prior to being consumed, tartar accumulates in a manner comparable to deposits observed with caimed foods. Approximately 95 to 98% of dry-type cat and dog foods are made by the extmsion process the remainder is made by pelleting or baking. 

Proteins. Proteins (qv) supply amino acids (qv), palatabiHty enhancement, and, when present in more than requited amounts, energy as the proteins are degraded and nitrogen compounds excreted. Dogs and cats can consume and meet amino acid requirements in the form of pure amino acids with complete success. However, animal tissue cannot differentiate between pure, plant, or animal sources of those amino acids, and those amino acids can be obtained much more economically from either plant or animal proteins. 

The terms synthetic, artificial, and chemical have aroused the doubts and suspicions of consumers in some instances (68,69). However, many such chemical components also occur in nature, ie, nature identical (37,68) (see Eood additives). It has been noted by the EDA that an artificial flavor is no less safe, nutritious, or desirable than a natural flavor, and that the purpose for distinguishing between a natural and artificial flavor is for economic reasons, ie, the natural flavor is often more expensive than the artificial flavor (70). Since it is generally economically impractical to isolate many of the components... 

Trends in commercial fuel, eg, fossd fuel, hydroelectric power, nuclear power, production and consumption in the United States and in the Organization of Economic Cooperation and Development (OECD) countries, are shown in Tables 2 and 3. These trends indicate (6,13) (/) a significant resurgence in the production and use of coal throughout the U.S. economy (2) a continued decline in the domestic U.S. production of cmde oil and natural gas lea ding to increased imports of these hydrocarbons (qv) and (J) a continued trend of energy conservation, expressed in terms of energy consumed per... 

The quantity of breathing gas consumed in deep dives is of both economical and logistical concern at depths of 300 m, a reasonably active diver requites ca 1.8 m (64 fT at STP) of breathing gas per minute. In closed-cycle breathing systems, of both the self-contained and umbiHcal types, the helium is recitculated after carbon dioxide is removed and the oxygen replenished (147). 

The economics of the arc-coal process is sensitive to the electric power consumed to produce a kilogram of acetylene. Early plant economic assessments indicated that the arc power consumption (SER = kwh/kgC2H2) must be below 13.2. The coal feedcoal quench experiments yielded a 9.0 SER with data that indicated a further reduction to below 6.0 with certain process improvements. In the propane quench experiment, ethylene as well as acetylene is produced. The combined process SER was 6.2 with a C2H2/C2H4 production ratio of 3 to 2. Economic analysis was completed uti1i2ing the achieved acetylene yields, and an acetylene price approximately 35% lower than the price of ethylene was projected. 

Although most lime is sold as quicklime, production of hydrated lime is also substantial. This product is made by the lime manufacturer in the form of a fluffy, dry, white powder, and its use obviates the necessity of slaking. Small lime consumers caimot economically justify the additional processing step that hydration entails. 

Waste Treatment. Microwave energy has been studied for the desulfurization of coal (qv) and treatment of wastes (190). Developments in microwave incinerators for medical and radioactive wastes have occurred (191,192). Even a consumer unit for consumption of sohd household waste has been proposed (193). Economic factors remain a key barrier in these developments. 

Composition of Foods Raw, Processed, Prepared, Agricultural HandbookNo. 8-1 to 8-21, Washington, D.C., Consumer and Eood Economics Institute, United States Department of Agriculture, 1989 to 1992. 

Though less important economically, solvent usage consumes a larger portion of the 1-nitropropane production than is consumed of the other nitroparaffins for this use. In particular, a blend of nitroethane and 1-nitropropane has been developed which is useful as an additive for improved coatings performance (116). 

The current and projected HDPE capacities are shown in Table 3, and producers of resins in Table 4. In most cases, an accurate estimation of the total HDPE volume is compHcated by the fact that a large number of plants also use the same reactors for manufacture of HDPE or LLDPE. UHMWPE is produced in the United States (Himont and American Hoechst), in Japan (Asahi), and in Germany (Hoechst) worldwide capacity is approximately 45,000 tons. The use of post-consumer (recycled) HDPE is gradually increasing in volume. The growth of recycling programs is driven principally by economics (110,114) it has increased from a mere 60,000 tons in 1989 to 350,000 tons in 1994 and is expected to increase to 1.4 million t in the year 2000 (115). 

In the United States, fibers and injection mol ding are the main appHcations for polypropylene (Table 8), followed by film. In Europe and Japan, injection mol ding appHcations predominate (Table 10). This market area is more likely to decline in economic recession, as consumers postpone purchases of apphances and automobiles. Film appHcations are important in both regions, but fibers are a much less important use for polypropylene in Japan than in other developed regions. The heavy use of polypropylene nonwovens in the manufacture of disposable diapers and similar products, and the wide use of polypropylene carpets in the United States, account for the greater consumption of fibers. 

Historically, the world s petroleum production pattern can be related to geologic, economic, and pohtical factors. In the past, many countries have had large excesses in production capacity, whereas in the 1990s, only countries in the Middle East, such as Saudi Arabia, Kuwait, Iraq, and the United Arab Emirates, have, in the short mn, enough excess capacity to expand production of conventional cmde petroleum in any significant manner. In the Middle East, production of petroleum is over five times the region s consumption (see Table 4). On a much smaller scale, Africa produces far more petroleum than it consumes (3.4 times). 

---