Dust magnesium

Oil and Metal Incendiary Mixtures. PTl is a complex mixture composed of magnesium dust, magnesium oxide, and carbon (qv), along with an adequate amount of petroleum (qv) and asphalt (qv) to form the paste (7). The U.S. developers have adopted the formula type c paste (goop),... 

Suspensions of oxidizable particles (e.g., flour, coal dust, magnesium powder, zinc dust, carbon powder, and flowers of sulfur) in the air can constitute a powerful explosive mixture. These materials should be used with adequate ventilation and should not be exposed to ignition sources. Some solid materials, when finely divided, are spontaneously combustible if allowed to dry while exposed to air. These materials include zirconium, titanium, Raney nickel, finely divided lead (such as prepared by p5trolysis of lead tartrate), and catalysts such as activated carhon containing active metals and hydrogen. 

Mg(OH)2 powder is classified by OSHA as a nuisance dust. ACGIH categorizes the powder form as particulates not otherwise classified. Exposure limits are as follows (108) ACGIH 10 mg/m , OSHA 5 mg/m (respirable), and 15 mg/m (total). Magnesium hydroxide is reported in the EPA TSCA inventory (109). 

Safety. Magnesium oxide (fume) has a permissible exposure limit (PEL) (134) (8 hours, TWA), of 10 mg/m total dust and 5 mg/m respirable fraction. Tumorigenic data (intravenous in hamsters) show a TD q of 480 mg/kg after 30 weeks of intermittent dosing (135), and toxicity effects data show a TC q of 400 mg/m for inhalation in humans (136). Magnesium oxide is compatible with most chemicals exceptions are strong acids, bromine pentafluoride, chlorine trifluoride, interhalogens, strong oxidizers, and phosphorous pentachloride. 

Magnesium vanadates, as vanadium compounds in general, are known irritants of the respiratory tract and conjunctiva. The threshold limit value (TLV) for vanadium compounds in air recommended by the National Institute of Occupational Safety and Health is 0.05 mg/m based on a typical 8-h workday and 40-h workweek (7,147). Chronic inhalation can lead to lung diseases such as bronchitis, bronchopneumonia, and lobar pneumonia. These dust-related effects can be avoided by use of individual respirators in areas where exposure is likely. 

Some cutting fluids, eg, oils, may present a fire ha2ard. Some work materials, eg, magnesium, aluminum, titanium (under certain conditions), and uranium, in finely divided form, also present fire ha2ards. Very small metal chips or dust may ignite. 

Magnesium is removed from brines of the Great Salt Lake in the form of magnesium chloride. This is then used to make elemental magnesium, dust suppressants, and bischofite flake. Magnesium chloride is also used in drilling mud, ion-exchange resins, oxi-chloral cements, fertilizers, and miscellaneous industrial uses. 

High 50,000 0,000 8-16 Aluminum, copper, zinc, vanadium, calcined dolomite, hme, magnesia, magnesium carhonates, sodium chloride, sodium and potassium compounds Flue dust, natural and reduced iron ores Flue dust, iron oxide, natural and reduced iron ores, scrap metals... 

A hydrated magnesium silicate in fibrous form. The fibres are believed to be the more hazardous component of asbestos dust. 

Metals — Several metals react with water and air with the extent of reactivity being dependent upon the physical state of the metal. The highly reactive metals such as lithium, sodium, and potassium are pyrophoric (i.e., they ignite spontaneously in air without an ignition source). In contrast, the less reactive metals such as magnesium, zirconium, titanium, aluminum, and zinc are highly pyrophoric only as dusts. 

Sand that is used in filtration must be free of clay, dust, and other impurities. The ratio of lime, lime-stone, and magnesium oxide will have to be lower than 5 weight percent. The standard guide value of the quality of fresh sand is to be below 2% soluble matter at 20 °C within 24 hours in hydrochloric acid of a 20 weight percent concentration. 

Combustible dusts include metal dust (e.g., aluminum, magnesium, and their commercial alloys), carbonaceous dust (e.g., carbon black, charcoal, and coal), flour, grain, wood, plastics, and chemicals. 

Group E Gonductive dust and metal dust aluminum, magnesium, and their commercial alloys... 

---