DOE contractor

Does contractor maintain an insurance policy of the type and minimum amount as specified m the contracted agreement (Please attach a copy of current insurance certificate.) ... 

Does contractor provide month-end balances to ABC Co. of ABC Co. owned raw materials, intermediates and finished product volumes ... 

DOE Order 5483.1 A, Occupational Safety and Health Program for DOE Contractor Employees at Government-Owned Contractor Operated (GOCO) Facilities. ... 

Each handbook contains an abstract, a foreword, an overview, learning objectives, and text material, and is divided into modules so that content and order may be modified by individual DOE contractors to suit their specific training needs. Each subject area is supported by a separate examination bank with an answer key. 

Process technology information must include at least (1) block flow diagrams or simplified process flow diagrams such as the type shown in Figure 4.1 (2) process chemistry (3) DOE contractor-established criteria for maximum inventory levels for process chemicals ... 

Process equipment design and materials must be documented by identifying the applicable codes and standards (e g., ASME, ASTM, API). If the codes and standards are not current, the DOE contractor must document that the design, construction, testing, inspection, and operation are still suitable for the intended use. If the process technology requires a design that departs from the applicable codes and standards, the contractor must document that the design and construction are suitable for the intended purpose. 

DOE contractors must retain PrHAs and updates for each process covered by the PSM Rule, along with documented resolutions of recommendations, for the life of the process. 

The PSM Rule specifies that DOE contractors use one or more of the following methodologies, as appropriate, to determine and evaluate the hazards of the process being analyzed ... 

Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, 175 Oak Ridge Turnpike, Oak Ridge, TN 37831 prices available at (423) 576-8401, fax C (423) 576-5725, E-mail C reports adonis.osti.gov... 

H. Maru et al., "ERC Direct Carbonate Fuel Cell Program Overview," DOE Contractor s Review Meeting, Morgantown, WV, August 26-28, 1997. 

Unfortunately, for two reasons the full potential of CBPCs has not yet been exploited in the DOE complex. In spite of its high technical success, this technology is only one decade old and is experiencing growing pains. Considerable familiarity is needed before a DOE contractor will accept the technology as a low risk venture. Also the technology has been... 

Lipert, T. E. et al. (1981) Testing and verification of granular bed filters for removal of particulates and alkalies. High Temperature, High Pressure Particulate and Alkali Control in Coal Combustion Process Streams. In Proceedings U.S. DOE Contractors Meeting, CONF-810249, pp. 471-489. 

Develop and link existing component and vehicle models to enhance systems analysis capabilities Collect experimental data and models from DOE contractors to validate system model predictions and to provide systems level insights to component developers... 

Initiated fuel cell component data collection effort with DOE contractors and received data from several parties... 

This analysis effort has focused on two areas 1) model enhancement and validation with data collected from DOE contractors and 2) application of the model to understand some of the design tradeoffs associated with fuel cell vehicles. The approach has been to work closely with industry partners to ensure that the models are accurate, to focus on appropriate systems issues, and to disseminate the study results in peer reviewed forums when possible. 

Voluntary Protection Program—The Department of Energy Voluntary Protection Program (DOE-VPP), which promotes safety and health excellence through cooperative efforts among labor, management, and government at DOE contractor sites. DOE has also formed partnerships with other... 

The EFCOG/DOE CSTC CUSHR Team conducted a limited review of how DOE sites address compressed gases. Results showed that at these sites, only 50-70% of requirements were addressed in site documentation of chemical-related safety and health requirements. These results confirmed the view that while all DOE contractors who engage in the same work activities must follow the same requirements, many either do not know which requirements apply to their work or are confused by them. The Team concluded that this was likely due to the fact that multiple requirements from many varied sources frequently overlap, covering the same points in slightly different and sometimes conflicting ways. 

Energy Asset Disposal System a module within the Federal Disposal System (FEDS) (see definition) database, available to DOE and DOE contractor personnel to conduct internal screening of excess chemicals for use within the agency it became effective Sept. 1, 1998. [NOTE EADS has replaced the Reportable Excess Automated Property System (REAPS) mentioned in 41CFR109-43.304-1.50],... 

DOE contractors must reduce or eliminate the generation of waste, the release of pollutants to the environment, and the use of Class I ozone-depleting substances (ODS), (see definition) through source reduction, re-use, segregation, and recycling and by procuring recycled-content materials and environmentally preferable products and services. 

DOE O 450.1, CRD sec. 4 4.5.6 DOE contractor purchase of certain designated items shall be only of those composed of the highest... 

---