Differential thermal technique

Some scientists describe DSC techniques as a subset of DTA. DTA can be considered a more global term, covering all differential thermal techniques, while DSC is a DTA technique that gives calorimetric (heat transfer) information. This is the reason that DSC has calorimetry as part of its name. Most thermal analysis work is DSC, and Sections 15.3.3 and 15.3.4 provide information about the instrumentation and applications of this technique. 

The term DTA is used either as a general term for differential thermal techniques (including DSC) or for those techniques that measure temperature differences but are not designed to measure the heat flow. Figure 7.17 shows the... 

Ramachandran, V. S., Evaluation of Concrete Admixtures Using Differential Thermal Technique, ACI/RILEM Symposium 1985 on Technology of Concrete When Pozzolans, Stags and Chemical Admixtures are Used, pp. 35-52, Monterry, Mexico (1985)... 

It is generally thought that the product resulting from the hydration of cement in the presence of silica fume consists of C-S-H (I) type calcium silicate hydrate. The C/S ratio of this hydrate has values between 0.9 and 1.3 Differential thermal technique is capable of identifying the... 

Thermal analysis iavolves techniques ia which a physical property of a material is measured agaiast temperature at the same time the material is exposed to a coatroUed temperature program. A wide range of thermal analysis techniques have been developed siace the commercial development of automated thermal equipment as Hsted ia Table 1. Of these the best known and most often used for polymers are thermogravimetry (tg), differential thermal analysis (dta), differential scanning calorimetry (dsc), and dynamic mechanical analysis (dma). 

A variety of instmmental techniques may be used to determine mineral content. Typically the coal sample is prepared by low temperature ashing to remove the organic material. Then one or more of the techniques of x-ray diffraction, infrared spectroscopy, differential thermal analysis, electron microscopy, and petrographic analysis may be employed (7). 

The procedures of measuring changes in some physical or mechanical property as a sample is heated, or alternatively as it is held at constant temperature, constitute the family of thermoanalytical methods of characterisation. A partial list of these procedures is differential thermal analysis, differential scanning calorimetry, dilatometry, thermogravimetry. A detailed overview of these and several related techniques is by Gallagher (1992). 

Difl erential thermal analysis (DTA) and differential scanning calorimetry (DSC) are the other mainline thermal techniques. These are methods to identify temperatures at which specific heat changes suddenly or a latent heat is evolved or absorbed by the specimen. DTA is an early technique, invented by Le Chatelier in France in 1887 and improved at the turn of the century by Roberts-Austen (Section 4.2.2). A... 

Thermogravimetric analysis has also been used in conjunction with other techniques, such as differential thermal analysis (DTA), gas chromatography, and mass spectrometry, for the study and characterisation of complex materials such as clays, soils and polymers.35... 

To minimize the stresses induced by differential thermal expansion/contraction one must (1) employ fastening techniques that allow relative movement between the component parts of the composite structure, (2) minimize the difference in coefficient of linear thermal expansion between the materials... 

The techniques referred to above (Sects. 1—3) may be operated for a sample heated in a constant temperature environment or under conditions of programmed temperature change. Very similar equipment can often be used differences normally reside in the temperature control of the reactant cell. Non-isothermal measurements of mass loss are termed thermogravimetry (TG), absorption or evolution of heat is differential scanning calorimetry (DSC), and measurement of the temperature difference between the sample and an inert reference substance is termed differential thermal analysis (DTA). These techniques can be used singly [33,76,174] or in combination and may include provision for EGA. Applications of non-isothermal measurements have ranged from the rapid qualitative estimation of reaction temperature to the quantitative determination of kinetic parameters [175—177]. The evaluation of kinetic parameters from non-isothermal data is dealt with in detail in Chap. 3.6. 

The Sr-Cu system has been critically assessed. The most recent phase diagram, determined by combining differential thermal analysis and x-ray diffraction techniques, contains two intermediate compounds, both of which form in peritectic reactions, SrCu (588°C) and SrCu, (845°C) SrCu has also been prepared for independent structural analysis-. ... 

The thermal stability of peroxides can be expressed in terms of their half-hfe (ti/a)- Half-life values can be estimated in solution utilizing the technique of differential thermal analysis. These values, or more precisely the temperatures at which their half-life is equivalent, provide an indication of practical vulcanization temperatures [49] (Table 14.29). 

The form of graph on which are displayed the results of tests done by the technique of differential thermal analysis. 

Fig. 3 Schematic diagram illustrating the essential aspects of the differential thermal analysis technique. The experimental observable is the differential temperature between sample and reference, which will be plotted as a function of the system temperature.

Reliable and internationally accepted techniques for screening are differential scanning calorimetry (DSC) and differential thermal analysis (DTA). These techniques can provide exothermic enthalpy of reaction and observed... 

Differential thermal analysis (DTA) is a technique in which the temperature difference between a substance and reference material is measured as a function of temperature or time while the substance and reference material are subjected to a controlled increase in temperature. Differential scanning calorimetry (DSC) is a technique in which the difference in energy inputs into the sample and reference material required to keep their temperatures equal is measured as a function of temperature while the substance and reference material are subjected to a controlled increase in temperature [70]. 

The purpose of differential thermal systems is to record the difference in the enthalpy changes that occurs between the reference and the test sample when both are heated in an identical fashion. Several publications are available concerning the theoretical aspects and applications of various thermal analysis techniques, including the DSC [71-74]. Commercial instruments are available from a number of companies including Perkin-Elmer, TA Instruments, Toledo-Mettler, SET ARAM, Seiko, and Polymer Laboratories. 

Wunderlich, B., Differential Thermal Analysis, Techniques and Chemistry, Volume I, Part V (1971). 

Differential thermal analysis (DTA) a technique in which the temperature difference between a substance and a reference material is measured as a function of temperature, while the substance and the reference material are subjected to a controlled temperature program. 

Differential thermal analysis (DTA) Chemical testing technique that produces similar data to DSC. DTA uses temperature differences to generate test results DSC has largely replaced the DTA technique as a screening tool for obtaining chemical hazard test data... 

---