Diels-Alder cycloreversion

Since the norcarene intermediate 34 has a double bond in the 6-membered ring, a Diels-Alder cycloreversion leading to cyclopropene (35) and butadiene is also a possible disconnection. The corresponding synthetic sequence has been carried out in the laboratory in 37% yield [32] ... 

Besides the bond-pair cheletropic disconnection of oxiranes and aziridines to an alkene and "atomic oxygen" (from a carboxylic peracid) or a nitrene, respectively, and the hetero-Diels-Alder cycloreversion, of special interest are the 1,3-dipolar cycloeliminations of five-membered rings [-(34-2)] leading to 1,3-dipoles and an unsaturated acceptor or dipolarophile. So large is the number of different five-membered heterocyclic systems resulting from 1,3-dipolar... 

An interesting one-pot, five-component domino process using an intermolecular Diels-Alder reaction of furans with AT-phenylmaleimide as its final step has been used to construct the central core of indolo[2,3- ]carbazoles (Equation 86) <2002AGE4291>. Thus, aminooxazoles produced from an Ugi three-component reaction undergo acylation/intramolecular Diels-Alder/retro-Diels-Alder cycloreversion with pentafluorophenyl arylprop-2-ynoates to give furan derivatives. Subsequent Diels-Alder cycloaddition at elevated temperatures with A -phenylmaleimide produces carbazoles in good yields (Table 5). 

There is a remarkable difference in the reaction modes of the two epimers of methyl 2,4-diphenyl-ejco-8-oxatricyclo[3.2.1.0 ]oct-6-ene-3-carboxylate (25). The jj -compound 25A isomerizes via [2n+2[Pg.2172]

The application of reversible click reactions, such as Cu-catalyzed azide-aUcyne addition, Michael-type addition, and retro Diels—Alder cycloreversion, is used as a simple approach to perform a degradation process under physiological conditions. This class of reversible chck reaction is promising for predictable, tunable control of cell microenvironment properties. 

Even azide moieties are capable of entering DA cycloaddition reactions with oxanorbornadiene derivatives, yielding triazole products. For example, the tandem [3 + 2]/Diels-Alder cycloreversion (CrDA) was used for the PEGyZatzon of an N-terminally azido functionalized peptide (GGRGDG). Furthermore, labeling of oxanorbornadiene-modified hen egg-white lysozyme with fluorescent coumarine was demonstrated. The release of furan... 

Second step is retro Diels-Alder cycloreversion of o s+o s+ic st3 e which is allowed thermally. T.S. of second step contains 6-electrons and 0-node, therefore, is aromatic predicting reaction is thermally allowed. 

This trend is revealed, for example, by the rates of Diels-Alder addition reactions of anthracene, naphthacene, and pentacene, in which three, four, and five rings, respectively are linearly fused. The rate data are shown in Table 9.3. The same trend can be seen in the activation energy and the resonance energy gained when cycloreversion of the adducts 9-12 yields the aromatic compoimd, as shown in Scheme 9.3. 

Cycloaddition involves the combination of two molecules in such a way that a new ring is formed. The principles of conservation of orbital symmetry also apply to concerted cycloaddition reactions and to the reverse, concerted fragmentation of one molecule into two or more smaller components (cycloreversion). The most important cycloaddition reaction from the point of view of synthesis is the Diels-Alder reaction. This reaction has been the object of extensive theoretical and mechanistic study, as well as synthetic application. The Diels-Alder reaction is the addition of an alkene to a diene to form a cyclohexene. It is called a [47t + 27c]-cycloaddition reaction because four tc electrons from the diene and the two n electrons from the alkene (which is called the dienophile) are directly involved in the bonding change. For most systems, the reactivity pattern, regioselectivity, and stereoselectivity are consistent with describing the reaction as a concerted process. In particular, the reaction is a stereospecific syn (suprafacial) addition with respect to both the alkene and the diene. This stereospecificity has been demonstrated with many substituted dienes and alkenes and also holds for the simplest possible example of the reaction, that of ethylene with butadiene ... 

The Boger pyridine synthesis involves the reaction of triazine 1 with activated alkene 2 in a hetero-Diels-Alder fashion. The intermediate bicyclic species 3 is unstable and a facile cycloreversion takes place due to the loss of nitrogen gas to afford the appropriately substituted pyridine derivative 4. 

Interestingly, in the inverse-electron-demand Diels-Alder reactions of oxepin with various enophiles such as cyclopentadienones and tetrazines the oxepin form, rather than the benzene oxide, undergoes the cycloaddition.234 236 Usually, the central C-C double bond acts as dienophile. Oxepin reacts with 2,5-dimethyl-3,4-diphenylcyclopenta-2,4-dienone to give the cycloadduct 6 across the 4,5-C-C double bond of the heterocycle.234 The adduct resists thermal carbon monoxide elimination but undergoes cycloreversion to oxepin and the cyclopenta-dienone.234... 

Triazine (38) is ideal for inverse electron-demand Diels-Alder cycloadditions, for example, with azulene to give a l,4-bis(CF3)phthalazine (89CB711). A rare example of the synthesis of a five-membered heterocycle originating from [4 + 1] cycloaddition followed by [4 + 2] cycloreversion was reported using (38). The intermediate tetraazanorbomadienimine (39) is highly strained and eliminates N2 [82AG(E)284]. 

The Diels Alder reaction is reversible and the direction of cycloaddition is favored because two n bonds are replaced by two cr-bonds. The cycloreversion occurs when the diene and/or dienophile are particularly stable molecules (i.e. 

The retro Diels-Alder reaction usually requires high temperatures in order to surmount the high activation barrier of the cycloreversion. Moreover, the strategy of retro Diels-Alder reaction is used in organic synthesis to mask a diene fragment or to protect a double bond [47]. Some examples are illustrated in Scheme 1.11. 

The retro Diels-Alder reaction is strongly accelerated when an oxide anion substituent is incorporated at positions 1 and 2 of the six-membered ring which has to be cycloreversed, namely at one terminus carbon of the original diene or at one sp carbon of the dienophile [51] (Equation 1.22). 

The first example of an oxide-anion accelerated retro Diels Alder reaction was reported by Papies and Grimme [52]. The adduct 19 (Equation 1.23) treated with tetra-w-butylammonium fluoride (TBAF) in THE at room temperature is immediately converted into 20, in contrast to the parent 21 (Equation 1.24) which undergoes cycloreversion into 22 at 100 °C. The dramatic oxide-anion acceleration (> 10 ) was ascribed to the loss of basicity of about 8pK, units in the transformation of alcoholate ion of precursor 19... 

Because of their low reactivity, a Diels-Alder reaction of 2-pyrones usually requires such a high temperature that the initial bicyclic lactone adducts often undergo cycloreversion [30,33] with loss of CO2. In some cases this limitation has been overcome by carrying out the reaction imder high pressure conditions. Posner and coworkers have shown [34-36] that the presence of a tolylthio group or a bromine atom at the 3- or 5-position increases the reactivity of 2-pyrones. 3-Bromo-2-pyrone (35) (Scheme 2.15), as well as its regioisomer 5-bromo (36)... 

The reaction of furan with 2,5-dihydrothiophene-3,4-dicarboxylic anhydride is remarkable (Scheme 6.19). Furan is a poor diene and requires high pressure to affect cycloadditions [39]. On the other hand, high temperatures are forbidden because cycloaddition products derived from furan undergo cycloreversion under these conditions. In 5.0m LP-DE, the Diels-Alder reaction of furan with 2,5-dihydrothiophene-3,4-dicarboxylic anhydride proceeds at room temperature and atmospheric pressure in 9.5 h with 70 % yield and with the same diastereos-electivity found when the reaction is carried out under high pressure [40]. 

Keywords cycloreversion, Diels-Alder oligomers, cycloreversion behavior... 

Scheme 6. Photochemical [2 + 2] cycloreversion of the dodecadehydro[18]annulene in furan as the solvent, followed by [4 + 2] Diels-Alder cycloaddition, gives the oxanorbornadiene adducts 38-40 [66]...

Scheme 9.17. Domino amide-formation/hetero-Diels-Alder reaction/Michael-cycloreversion producing pyrrolopyridines 9-86.

Furthermore, oxazoles of type 9-82 bearing a secondary amino functionality can be converted into pyrrolo[3,4-b]pyridines 9-86 by reaction with appropriate acid chlorides 9-83 in a triple domino process consisting of amide formation/hetero Diels-Alder reaction and retro-Michael cycloreversion via 9-84 and 9-85 (Scheme 9.17). The pyrrolo[3,4-fc]pyridines can be obtained in even higher yields when the whole sequence is carried out as a four-component synthesis in toluene. Here, 1.5 equiv. NH4C1 must be added for the formation of the now intermediate oxazoles [56b]. 

A somewhat milder route which appears to be devoid of the complications of isomerization is the retro-Diels-Alder reaction of bicyclo [2.2.2] octadienes, frequently substituted with aryl groups (5,30,53,65), [Eq. (2)], and recently Wiberg (88,90) described a very mild route involving both [2 + 2] and [2 + 4] cycloreversions which occur at 60°C to generate Me2Si=C(SiMe3)2. However, the generality of this latter source of silenes has not been established yet [Eq. (3)]. 

The scope of the microwave technique in the preparation of fullerene derivatives was determined in the well known Diels-Alder reaction of C6o with anthracene (1) [71], which has been reported to occur under thermal conditions (13% [71a], reflux, toluene, three days 25% [71b], reflux, benzene, 12 h) (Scheme 9.22). In addition to 76, multiply-substituted adducts that undergo cycloreversion to the starting materials were formed. 

A similar transformation occurs as a critical step in the total synthesis of (+)-estrone by a Diels-Alder cycloaddition-cycloreversion pathway (Eq. 80).227 It is worth noting that in this reaction the conjugated double bond is stereoselectively reduced while both an isolated double bond and a ketone carbonyl are preserved. 

Dicyclohexyl ether [Brpnsted acid promoted ketone reduction, symmetrical ether], 123 Diels-Alder cycloaddition-cycloreversion pathway, alkene to alkane reductions, trisubstituted alkenes, 39-40 3,5-Dimethyl-1 -cyclohexen-1 -yl... 

Retro-Diels-Alder reactions can be used to regenerate dienes or alkenes from Diels-Alder protected cyclohexene derivatives under pyrolytic conditions144. Most of the synthetic utility of this reaction comes from releasing the alkene by diene-deprotection. However, tetralin undergoes cycloreversion via the retro-Diels-Alder pathway to generate o-quinodimethane under laser photolysis (equation 89)145. A precursor of lysergic acid has been obtained by deprotection of the conjugated double bond and intramolecular Diels Alder reaction (equation 90)146. 

On heating, dihydrooxazines (548) undergo the known [4 +2]-cycloreversion to give the previously unknown conjugated en-imines CH2=C(C02Me)CH=N—E as intermediates. The latter can be trapped in a Diels—Alder reaction at the terminal or internal electron-rich double bond. 

In the last 5 years, catalytic antibodies have been generated for several reaction types, including the various types of hydrolysis, transesterification, amide bond formation, /3-elimination, cycloreversion, transacylation, redox reactions, E-Z isomerization, epoxidation, and Diels-Alder reactions. For more information on these and other recent developments, such as semi-synthetic antibodies, site-directed mutagenesis, and the bait-and-switch strategy, the reader should consult the appropriate authorities (Schultz, 1988, 1989a,b Benkovic et al., 1990 Janda et al., 1990, 1991 Janjic and Tramontano, 1990 Lerner et al., 1991). 

In addition to the reaction of vinylcarbene complexes with alkynes, further synthetic procedures have been developed in which Fischer-type carbene complexes are used for the preparation of benzenes. Most of these transformations are likely to be mechanistically related to the Dbtz benzannulation reaction, and can be rationalized as sequences of alkyne-insertions, CO-insertions, and electrocycli-zations. A selection of examples is given in Table 2.18. Entry 4 in Table 2.18 is an example of the Diels-Alder reaction (with inverse electron demand) of an enamine with a pyran-2-ylidene complex (see also Section 2.2.7 and Figure 2.36). In this example the adduct initially formed eliminates both chromium hexacarbonyl ([4 -I- 2] cycloreversion) and pyrrolidine to yield a substituted benzene. 

---