Ketones dehydrogenation

On the other hand, acyclic ketones, when oxidized in trifluoroacetic acid [82] or in MeCN [83], gave dehydrogenated ketones and products substituted at the remote (y, S, or e) positions. 

Attempts to dehydrogenate ketones have been plagued by product inhibition, particularly by cyclometallation of the initially produced a,/3-unsaturated ketones or by additions of aromatized cyclic ketones. Within the range of substrates that is presently very limited by these factors, however, regioselective dehydrogenation of ketones has been successfully achieved [31]. 

Sodium salt of 12-tungstophosphoric acid acts as catalyst for isomerization, polymerization, nitrile synthesis, dehydrochlorination, dehydrogenation, ketone synthesis, ring-closure synthesis, oil bodying, aromatization, and desulfurization [10.4,10.21]. 

Oxidation of carbon side-chains has resulted in the synthesis of dithiazolyl ketone (82) and thiazolyl phenyl ketone (83). The hydrocarbon chain can also be dehydrogenated in acetic acid in the presence of... 

Production of maleic anhydride by oxidation of / -butane represents one of butane s largest markets. Butane and LPG are also used as feedstocks for ethylene production by thermal cracking. A relatively new use for butane of growing importance is isomerization to isobutane, followed by dehydrogenation to isobutylene for use in MTBE synthesis. Smaller chemical uses include production of acetic acid and by-products. Methyl ethyl ketone (MEK) is the principal by-product, though small amounts of formic, propionic, and butyric acid are also produced. / -Butane is also used as a solvent in Hquid—Hquid extraction of heavy oils in a deasphalting process. 

Direct oxidation yields biacetyl (2,3-butanedione), a flavorant, or methyl ethyl ketone peroxide, an initiator used in polyester production. Ma.nufa.cture. MEK is predominandy produced by the dehydrogenation of 2-butanol. The reaction mechanism (11—13) and reaction equihbtium (14) have been reported, and the process is in many ways analogous to the production of acetone (qv) from isopropyl alcohol. 

The one-step route from 2-propanol coproduces diisobutyl ketone and acetone, and is practiced in the United States by Union Carbide (61). The details of a vapor-phase 2-propanol dehydrogenation and condensation process for the production of acetone, MIBK, and higher ketones have been described in recent patents (62,63). The process converts an a2eotropic 2-propanol—water feed over a copper-based catalyst at 220°C and produces a product mixture containing 2-propanol (11.4%), acetone (52.4%), MIBK (21.6%), diisobutyl ketone (6.5%), and 4-methyl-2-pentanol (2.2%). 

Biacetyl is produced by the dehydrogenation of 2,3-butanediol with a copper catalyst (290,291). Prior to the availabiUty of 2,3-butanediol, biacetyl was prepared by the nitrosation of methyl ethyl ketone and the hydrolysis of the resultant oxime. Other commercial routes include passing vinylacetylene into a solution of mercuric sulfate in sulfuric acid and decomposing the insoluble product with dilute hydrochloric acid (292), by the reaction of acetal with formaldehyde (293), by the acid-cataly2ed condensation of 1-hydroxyacetone with formaldehyde (294), and by fermentation of lactic acid bacterium (295—297). Acetoin [513-86-0] (3-hydroxy-2-butanone) is also coproduced in lactic acid fermentation. 

L = P(CH3)3 or CO, oxidatively add arene and alkane carbon—hydrogen bonds (181,182). Catalytic dehydrogenation of alkanes (183) and carbonylation of bensene (184) has also been observed. Iridium compounds have also been shown to catalyse hydrogenation (185) and isomerisation of unsaturated alkanes (186), hydrogen-transfer reactions, and enantioselective hydrogenation of ketones (187) and imines (188). 

Dehydrogenation processes for acetone, methyl isobutyl ketone [108-10-1], and higher ketones (qv) utilizing, in one process, a copper-based catalyst have been disclosed (18,19). Dehydrogenation reaction is used to study the acid—base character of catalytic sites on a series of oxides (20,21). 

Rhenium oxides have been studied as catalyst materials in oxidation reactions of sulfur dioxide to sulfur trioxide, sulfite to sulfate, and nitrite to nitrate. There has been no commercial development in this area. These compounds have also been used as catalysts for reductions, but appear not to have exceptional properties. Rhenium sulfide catalysts have been used for hydrogenations of organic compounds, including benzene and styrene, and for dehydrogenation of alcohols to give aldehydes (qv) and ketones (qv). The significant property of these catalyst systems is that they are not poisoned by sulfur compounds. 

In the petroleum (qv) industry hydrogen bromide can serve as an alkylation catalyst. It is claimed as a catalyst in the controlled oxidation of aHphatic and ahcycHc hydrocarbons to ketones, acids, and peroxides (7,8). AppHcations of HBr with NH Br (9) or with H2S and HCl (10) as promoters for the dehydrogenation of butene to butadiene have been described, and either HBr or HCl can be used in the vapor-phase ortho methylation of phenol with methanol over alumina (11). Various patents dealing with catalytic activity of HCl also cover the use of HBr. An important reaction of HBr in organic syntheses is the replacement of aHphatic chlorine by bromine in the presence of an aluminum catalyst (12). Small quantities of hydrobromic acid are employed in analytical chemistry. 

The chloranil dehydrogenation of A -3-ketones offers a convenient direct conversion to A -ketones. t-Butanol and xylene are the most suitable solvents. Slightly higher yields have been claimed with mixed organic acid-inert solvent systems, although somewhat lower yields (50-60%) are... 

---