Cyclohexanone catalytic reduction

H2N (CH2)a NH2- Colourless solid when pure m.p. 4LC, b.p. 204 C. Manufactured by the electrochemical combination of two molecules of acrylonitrile to adiponitrile followed by catalytic reduction, or by a series of steps from cyclohexanone via adipic acid. Used in the production of Nylon [6, 6]. 

Adipic acid can also be obtained from cyclohexane extracted from petroleum, or manufactured by catalytic reduction of benzene. The cyclohexane is oxidized with air in the presence of copper or cobalt, which act as catalysts, to give a mixture of cyclohexanol and cyclohexanone, both of... 

Spiradines F and G. Spiradine G has been assigned structure (19) by Toda and Hirata. Spiradine F is its monoacetate. The empirical formula fitted an atisine derivative. The presence of an exocyclic methylene group on a six-membered ring (permanganate cleavage to a cyclohexanone) fitted this. The presence of two carbinolamine ether groups was shown by borohydride reduction to a tetra-hy dro-triol (20). Catalytic reduction produced a saturated triol, which on selenium... 

The use of the cobalt triad carbonyls as catalysts continues to provide many papers for this report. Publications cover the silylformylation of 1-Hexyne catalyzed by diodium-cobalt carbonyl clusters the formation of hydroxycarbene cobalt carbonyl derivatives, the use of rhodium cluster carbonyls in the water-gas shift reaction Rh4(CO) 2> and Co3Rh(CO)] 2 catalysts for the hydrosilation of isoprene, cyclohexanone and cyclohexenone catalytic reduction of NO by CO and the carbonylation of unsaturated compounds The chemistry of iridium carbonyl cluster complexes has been extended by making use of capping reactions with HgCl2and Au(PPh3)Q... 

Being more tolerant to impurities dian aluminium alkoxides, Sn(Oct)2 is widely used for the industrial production of PCL and PLAs mainly in bulk, within batch reactors. Any discussion on die industrial production of polymers has to integrate not only the polymerisation process, but also the monomer production. eCL is prepared by the Baeyer-Villiger oxidation of cyclohexanone (Renz et al, 1999 Rocca et al, 2003), which is produced by the catalytic oxidation of cyclohexane, itself resulting from the catalytic reduction of benzene, made available from oil, a non-renewable resource (Fig. 4.8). 

Other methods for the preparation of cyclohexanecarboxaldehyde include the catalytic hydrogenation of 3-cyclohexene-1-carboxaldehyde, available from the Diels-Alder reaction of butadiene and acrolein, the reduction of cyclohexanecarbonyl chloride by lithium tri-tcrt-butoxy-aluminum hydride,the reduction of iV,A -dimethylcyclohexane-carboxamide with lithium diethoxyaluminum hydride, and the oxidation of the methane-sulfonate of cyclohexylmethanol with dimethyl sulfoxide. The hydrolysis, with simultaneous decarboxylation and rearrangement, of glycidic esters derived from cyclohexanone gives cyclohexanecarboxaldehyde. 

Tetrahydrocarboline derivatives have recently been synthesized from 2-o-nitroarylated cyclohexanone derivatives. Thus, reductive cyclization of 3-(2,4-dinitrophenyl)-l-methyl-4-piperidone (68) (prepared by the reaction of 2,4-dinitrochlorobenzene with l-methyl-4-A-pyrrolidmo-3-piperideine) gave 7-amino-2-methyl-l,2,3,4-tetrahydro-y-carboline (69). Neither catalytic nor chemical reduction of the... 

We recently reported that Cu/Si02 is an effective catalyst for the hydrogenation of cyclohexanones under very mild experimental conditions. Thus, a series of cyclohexanones with different substituents, including 3-oxo-steroids, could be reduced under 1 atm of H2 at 40-90°C, with excellent selectivity (5). The catalyst is non-toxic and reusable. This prompted us to investigate the reduction of cyclohexanones over a series of supported copper catalysts under hydrogen transfer (h.t.) conditions (2-propanol, N2, 83 °C) and to compare the results with those obtained under catalytic hydrogenation (n-heptane, 1 atm H2, 40-90°C) conditions. Here we report the results obtained in the hydrogenation of 4-tert-butyl-cyclohexanone, a molecule whose reduction,... 

Pyrrolidone is a lactone used for the production of nylon-4. This reactant may be produced by the reduction ammoniation of maleic anhydride. s-Caprolactam, used in the production of nylon-6, may be produced by the Beckman rearrangement of cyclohexanone oxime (structure 17.11). The oxime may be produced by the catalytic hydrogenation of nitrobenzene, the photolytic nitrosylation of cyclohexane (structure 17.9), or the reaction of cyclohexanone and hydroxylamine (structure 17.10). Nearly one-half of the production of caprolactam is derived from phenol. 

You can also catalytically reduce aldehydes and ketones to produce 1° and 2° alcohols. Reduction conditions are very similar to those used to reduce alkene double bonds. If a molecule possesses both a double bond and an aldehyde or ketone functional group, reduction of the aldehyde or ketone group is best carried out using sodium borohydride. The reduction of cyclohexanone by hydrogen gas with a platinum catalyst produces cyclohexanol in good yield. 

The catalytic effect of DMP+ can be best demonstrated with an example. Consider the reduction of cyclohexanone 16). This substrate does not exhibit a polarographic wave, nor a CV reduction peak (Fig. la and 2a). On the other hand, DMP+ shows... 

Catalytic Oppenauer oxidations (Eq. 28) and Meerwein-Ponndorf-Verley reductions (Eq. 29) were studied in detail [232,234]. The gadolinium derivative, employed in situ without elimination of LiCl, was reported to be ten times more reactive in the MPV reduction of cyclohexanone as the standard reagent Al(OiPr)3 [235]. 

Preparative Methods the most convenient preparation of (/ ,/ )-stilbenediamine is described in Organic Syntheses." Condensation of benzil and cyclohexanone in the presence of ammonium acetate and acetic acid (eq 1) produces a spirocyclic 2//-imidazole (mp 105-106 °C). Reduction with Lithium in THF/NH3 followed by an ethanol quench and hydrolysis with aqueous HCl (eq 2) affords the racemic diamine as a pale yellow solid (mp 81-82 °C). Resolution is achieved by multiple recrystallizations of the tartaric acid salts ifom water/ethanol. The sulfonamides are prepared by reaction of the enantiomeri-cally pure diamine with the appropriate anhydride or sulfonyl chloride in CH2CI2 in the presence of Triethylamine and a catalytic amount of 4-Dimethylaminopyridine (eq 3). 

A simultaneous reduction-oxidation sequence of hydroxy carbonyl substrates in the Meerwein-Ponndorf-Verley reduction can be accomplished by use of a catalytic amount of (2,7-dimethyl-l,8-biphenylenedioxy)bis(dimethylaluminum) (8) [33], This is an efficient hydride transfer from the sec-alcohol moiety to the remote carbonyl group and, because of its insensitivity to other functionalities, should find vast potential in the synthesis of complex polyfunctional molecules, including natural and unnatural products. Thus, treatment of hydroxy aldehyde 18 with 8 (5 mol%) in CH2CI2 at 21 °C for 12 h resulted in formation of hydroxy ketone 19 in 78 % yield. As expected, the use of 25 mol% 8 enhanced the rate and the chemical yield was increased to 92 %. A similar tendency was observed with the cyclohexanone derivative. It should be noted that the present reduction-oxidation sequence is highly chemoselective, and can be utilized in the presence of other functionalities such as esters, amides, rert-alco-hols, nitriles and nitro compounds, as depicted in Sch. 10. 

---