Cyanides activator

Cyanide activates K p channels in the brain and also in the heart. The K p channel inhibitor gUbenclamide blocked the effect of KCN in the Langendorf perfused rat heart. However part of the effect of gUdenclamide and that of KCN on cell potassium is due to inhibition of Na K ATPase. An increase in K loss through the K /lactate co-transporter by KCN was also demonstrated by use of a blocker of this transport system, a-cyano-4-hydroxycinnamic acid. Thus the effect of KCN on K efQux in the heart involves three factors activation of the K p channel, blockage of Na K ATPase, and activation of the K lactate cotransporter. 

Hydrochloric acid is a strong acid under the aqueous conditions, this leads to nitrile hydrolysis, protonation of the cyanide activates it to attack by water, which after a sequence of protonation-deprotonation steps leads to an amide product. 

A FI multisensor system comprising potentiometric sensors of different types for the determination of free cyanide activity in basic solutions for extraction of noble metals has been developed [35]. Solvent polymeric membrane sensors based on metalloporphyrin and crystalline sensors were combined in the sensor system. The sensors of different types were built into the system to form a multisensor detector. The FI multisensor was also beneficial due to computerizing of measurements, automatic sampling, and sample treatment and also due to minimizing amounts of reagents. Preparation of sensor membranes is described below. 

With material such as gut mucosa and gastric juices even this treatment may not release the vitamin sufficiently to make it available to the test micro-organism. In these cases, a more complicated extraction involving the use of cyanide-activated papain is needed. ... 

Indoleacetic acid In a 1-litre flask, fitted with a reflux condenser, place a solution of 35 2 g. of sodium cyanide in 70 ml. of water, then add 25 g. of gramine and 280 ml. of 95 per cent, ethanol. Reflux the mixture (steam bath) for 80 hours. Dilute the cooled reaction mixture with 35 ml. of water, shake with a little activated charcoal (e.g., Norit), filter and concentrate to about 350 ml. imder reduced pressure (water pump) in order to remove most of the alcohol. Cool to about 5°, filter off the solid and wash it with a little cold water keep the filtrate (A). Recrystallise the solid from alcohol-ether to give 5-0 g. of 3-indoleacetamide, m.p. 150-151°. 

As a class of compounds, the two main toxicity concerns for nitriles are acute lethality and osteolathyrsm. A comprehensive review of the toxicity of nitriles, including detailed discussion of biochemical mechanisms of toxicity and stmcture-activity relationships, is available (12). Nitriles vary broadly in their abiUty to cause acute lethaUty and subde differences in stmcture can greatly affect toxic potency. The biochemical basis of their acute toxicity is related to their metaboHsm in the body. Following exposure and absorption, nitriles are metabolized by cytochrome p450 enzymes in the Hver. The metaboHsm involves initial hydrogen abstraction resulting in the formation of a carbon radical, followed by hydroxylation of the carbon radical. MetaboHsm at the carbon atom adjacent (alpha) to the cyano group would yield a cyanohydrin metaboHte, which decomposes readily in the body to produce cyanide. Hydroxylation at other carbon positions in the nitrile does not result in cyanide release. 

Compounds with active hydrogen add to the carbonyl group of acetone, often followed by the condensation of another molecule of the addend or loss of water. Hydrogen sulfide forms hexamethyl-l,3,5-trithiane probably through the transitory intermediate thioacetone which readily trimerizes. Hydrogen cyanide forms acetone cyanohydrin [75-86-5] (CH2)2C(OH)CN, which is further processed to methacrylates. Ammonia and hydrogen cyanide give (CH2)2C(NH2)CN [19355-69-2] ix.orn. 6<55i the widely used polymerization initiator, azobisisobutyronitrile [78-67-1] is made (4). 

Activators enhance the adsorption of collectors, eg, Ca " in the fatty acid flotation of siUcates at high pH or Cu " in the flotation of sphalerite, ZnS, by sulfohydryl collectors. Depressants, on the other hand, have the opposite effect they hinder the flotation of certain minerals, thus improving selectivity. For example, high pH as well as high sulfide ion concentrations can hinder the flotation of sulfide minerals such as galena (PbS) in the presence of xanthates (ROCSS ). Hence, for a given fixed collector concentration there is a fixed critical pH that defines the transition between flotation and no flotation. This is the basis of the Barsky relationship which can be expressed as [X ]j[OH ] = constant, where [A ] is the xanthate ion concentration in the pulp and [Oi/ ] is the hydroxyl ion concentration indicated by the pH. Similar relationships can be written for sulfide ion, cyanide, or thiocyanate, which act as typical depressants in sulfide flotation systems. 

In the presence of strongly acidic media, such as triflic acid, hydrogen cyanide or trimethylsilyl cyanide formylates aromatics such as ben2ene. Diprotonotated nittiles were proposed as the active electrophilic species in these reactions (119). 

Nitriles. Nitriles can be prepared by a number of methods, including ( /) the reaction of alkyl haHdes with alkaH metal cyanides, (2) addition of hydrogen cyanide to a carbon—carbon, carbon—oxygen, or carbon—nitrogen multiple bond, (2) reaction of hydrogen cyanide with a carboxyHc acid over a dehydration catalyst, and (4) ammoxidation of hydrocarbons containing an activated methyl group. For reviews on the preparation of nitriles see references 14 and 15. 

Solvent for Displacement Reactions. As the most polar of the common aprotic solvents, DMSO is a favored solvent for displacement reactions because of its high dielectric constant and because anions are less solvated in it (87). Rates for these reactions are sometimes a thousand times faster in DMSO than in alcohols. Suitable nucleophiles include acetyUde ion, alkoxide ion, hydroxide ion, azide ion, carbanions, carboxylate ions, cyanide ion, hahde ions, mercaptide ions, phenoxide ions, nitrite ions, and thiocyanate ions (31). Rates of displacement by amides or amines are also greater in DMSO than in alcohol or aqueous solutions. Dimethyl sulfoxide is used as the reaction solvent in the manufacture of high performance, polyaryl ether polymers by reaction of bis(4,4 -chlorophenyl) sulfone with the disodium salts of dihydroxyphenols, eg, bisphenol A or 4,4 -sulfonylbisphenol (88). These and related reactions are made more economical by efficient recycling of DMSO (89). Nucleophilic displacement of activated aromatic nitro groups with aryloxy anion in DMSO is a versatile and useful reaction for the synthesis of aromatic ethers and polyethers (90). 

Zinc ores are generally floated at the mine (18). In the case of simple zinc sulfide ores, flotation is carried out by treatment with copper sulfate to activate the sphalerite causing it to be wet by the organic collector (eg, xanthate). The now-hydrophobic zinc ore particles attach themselves to the rising bubbles. Oxidized ore particles present must be sulftdized with sodium sulfide to be floated (19). Flotation produces concentrates which are ca 50—60% zinc. In mixed ore, the lead and copper are usually floated after depressing the sphalerite with cyanide or zinc sulfate. The sphalerite is then activated and floated. 

Nearly all uses and appHcations of benzyl chloride are related to reactions of the active haUde substituent. More than two-thirds of benzyl chloride produced is used in the manufacture of benzyl butyl-phthalate, a plasticizer used extensively in vinyl flooring and other flexible poly(vinyl chloride) uses such as food packaging. Other significant uses are the manufacture of benzyl alcohol [100-51-6] and of benzyl chloride-derived quaternary ammonium compounds, each of which consumes more than 10% of the benzyl chloride produced. Smaller volume uses include the manufacture of benzyl cyanide [140-29-4], benzyl esters such as benzyl acetate [140-11-4], butyrate, cinnamate, and saUcylate, benzylamine [100-46-9], and benzyl dimethyl amine [103-83-8], and -benzylphenol [101-53-1]. In the dye industry benzyl chloride is used as an intermediate in the manufacture of triphenylmethane dyes (qv). First generation derivatives of benzyl chloride are processed further to pharmaceutical, perfume, and flavor products. 

Hydrogen cyanide adds to an olefinic double bond most readily when an adjacent activating group is present in the molecule, eg, carbonyl or cyano groups. In these cases, a Michael addition proceeds readily under basic catalysis, as with acrylonitrile (qv) to yield succinonitnle [110-61-2], C4H4N2, iu high yield (13). Formation of acrylonitrile by addition across the acetylenic bond can be accompHshed under catalytic conditions (see Acetylene-DERIVED chemicals). 

High yields of optically active cyanohydrins have been prepared from hydrogen cyanide and carbonyl compounds using an enzyme as catalyst. Reduction of these optically active cyanohydrins with lithium aluminum hydride in ether affords the corresponding substituted, optically active ethanolamine (5) (see Alkanolamines). 

Reference 38 is a good guide to the selection of plate thickness test methods. Test methods may vary with the purity and electrochemical activity of the deposit. Metals deposited from commercial plating solutions are seldom pure. For example, zinc deposits from the three commonly used baths, ie, cyanide, chloride, and zincate, vary significantly in purity and activity (39). Standard ASTM test methods for determining plate thickness are... 

---