Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Particle attachment

Zinc ores are generally floated at the mine (18). In the case of simple zinc sulfide ores, flotation is carried out by treatment with copper sulfate to activate the sphalerite causing it to be wet by the organic collector (eg, xanthate). The now-hydrophobic zinc ore particles attach themselves to the rising bubbles. Oxidized ore particles present must be sulftdized with sodium sulfide to be floated (19). Flotation produces concentrates which are ca 50—60% zinc. In mixed ore, the lead and copper are usually floated after depressing the sphalerite with cyanide or zinc sulfate. The sphalerite is then activated and floated. [Pg.399]

Another modification is the use of microbubble column flotation (13). In this process, smaller bubbles are generated to enhance the recovery of micrometer-sized particles. A countercurrent flow of feed slurry is also used to further enhance the bubble—particle attachment. The process is capable of produciug ultraclean coals containing less than 0.8% ash. [Pg.254]

Various techniques are available to separate the different types of particles that may be present in a sohd mixture. The choice depends on the physicochemical nature of the sohds and on site-specific considerations (for example, wet versus diy methods). A key consideration is the extent of the liberation of the individual particles to be separated. Particles attached to each other obviously cannot be separated by direct mechanical means except after the attachment has been broken. In ore processing, the mineral values are generally liberated by size reduction (see Sec. 20). Rarely is liberation complete at any one size, and a physical-separation flow sheet wih incorporate a sequence of operations that often are designed first to rejec t as much... [Pg.1755]

Thermodynamics of Wetting. The fundamental objective of flotation is to contact solid particles suspended in water with air bubbles (Fig. 19-65 ) and cause a stable bubble-particle attachment (Fig. 19-65Z ). It is seen that attachment of the particle to an air bubble destroys the solid-water and air-water interfaces and creates air-solid interface. The free energy change, on a unit area basis, is given by... [Pg.1810]

Hydrodynamic Forces Necessary To Release Non-Brownian Particles Attached to a Surface... [Pg.547]

A number of important processes depend on the permanence of particle attachment to surfaces by Van der Waal forces in the presence of flowing fluids. These include enzyme fixation, particle filtration, oil production, nuclear reaction excursions, migration of surface contaminants, etc. The release of particles attached to a surface plays an important role in these processes. [Pg.547]

When ultrasound emitter and electrode are different elements in the system, electrode-apart-transducer configuration, Fig. 4.2a, ultrasound removes the nanoparticles from the cathode to form suspended seeds. The ultrasonic agitation maintains a suspension of these preformed nanoparticles, which move continuously around, hit the electrodes, and these charged particles attach to one another and grow in suspension [90]. In this case, ultrasound keeps the larger structures from agglomeration. [Pg.120]

Attachment There is a high specificity in the interaction between virus and host. The most common basis for host specificity involves the attachment process. The virus particle itself has one or more proteins on the outside which interact with specific cell surface components called receptors. The receptors on the cell surface are normal surface components of the host, such as proteins, polysaccharides, or lipoprotein-polysaccharide complexes, to which the virus particle attaches. In the absence of the receptor site, the virus cannot adsorb, and hence cannot infect. If the receptor site is altered, the host may become resistant to virus infection. However, mutants of the virus can also arise which are able to adsorb to resistant hosts. [Pg.124]

Bacteriophage T7 Bacteriophage T7 and its close relative T3 are relatively small DNA viruses that infect Escherichia coli. (Some strains of Shigella and Pasteurella are also hosts for phage T7.) The virus particle has an icosahedral head and a very small tail. The virus particle is fairly complex, with S different proteins in the head and 3-6 different proteins in the tail. One tail protein, the tail fiber protein, is the means by which the virus particle attaches to the bacterial cell surface. Only female cells of Escherichia coli can be infected with T7 male cells can be infected but the multiplication process is terminated during the latent period. [Pg.140]

FIGURE 2-10 Tracking a gold particle attached to a single molecule of phosphatidyl ethanolamine. What appears to be simple Brownian diffusion at a time resolution of 33 ms per video frame (A) is revealed to actually consist of fast hop diffusion by recording 300 times faster (B) at 110 ps per video frame. In (A) each color represents 60 frames = 2 seconds. In (B) each color indicates an apparent period of confinement within a compartment and black indicates intercompartmental hops. The residency time for each compartment is indicated. The hypothetical explanations are illustrated in part (C) and discussed in the text. Adapted from [29]. [Pg.31]

Fig. 2.2-1. A neutron capture event seen in relation to the size of the target. Electron microscopic image of uncontrasted tumor tissue, stained for boron by antibodies. The smaller structure surrounded by clusters of dots is the nucleus. The thin structure lined with dots is the cell membrane. The dots are gold particles attached to the antibodies which are specifically directed against the... Fig. 2.2-1. A neutron capture event seen in relation to the size of the target. Electron microscopic image of uncontrasted tumor tissue, stained for boron by antibodies. The smaller structure surrounded by clusters of dots is the nucleus. The thin structure lined with dots is the cell membrane. The dots are gold particles attached to the antibodies which are specifically directed against the...
Fig. 38 (Upper panel) Scanning force microscopy images of gold nanoparticles (diameter 17 nm) adsorbed along a surface-anchored poly(acryl amide) brush with a molecular weight gradient (Edge of each image = 1 p.m). (Lower panel) Dry thickness of poly(acryl amide) on the substrate before particle attachment (right, ) and particle number density profile (left, ). (Reproduced with permission from [140])... Fig. 38 (Upper panel) Scanning force microscopy images of gold nanoparticles (diameter 17 nm) adsorbed along a surface-anchored poly(acryl amide) brush with a molecular weight gradient (Edge of each image = 1 p.m). (Lower panel) Dry thickness of poly(acryl amide) on the substrate before particle attachment (right, ) and particle number density profile (left, ). (Reproduced with permission from [140])...
Figure 2.22 Colloidal particle attached to a solid surface by a water meniscus. Figure 2.22 Colloidal particle attached to a solid surface by a water meniscus.

See other pages where Particle attachment is mentioned: [Pg.8]    [Pg.1050]    [Pg.437]    [Pg.137]    [Pg.1815]    [Pg.2016]    [Pg.171]    [Pg.1050]    [Pg.25]    [Pg.5]    [Pg.49]    [Pg.379]    [Pg.118]    [Pg.12]    [Pg.226]    [Pg.119]    [Pg.140]    [Pg.11]    [Pg.297]    [Pg.254]    [Pg.270]    [Pg.220]    [Pg.321]    [Pg.9]    [Pg.101]    [Pg.239]    [Pg.11]    [Pg.107]    [Pg.108]    [Pg.108]    [Pg.109]    [Pg.112]    [Pg.112]    [Pg.225]    [Pg.284]    [Pg.429]    [Pg.278]   


SEARCH



Attachment of radon decay products to aerosol particles

Motion of Particles Attached to Giant

Motion of Particles Attached to Giant Vesicles: Falling Ball Viscosimetry

Motion of Particles Attached to Giant Vesicles: Falling Ball Viscosimetry and

Particle attachement/detachement mechanism

Particles attached metallic

Role of r.s.c. in transport stage at different particle attachment

© 2024 chempedia.info