Ethylene cracking

One approach is to uses solvent extraction with dimethyl formamide (DMF) to remove Cj acetylene and a C, acetylene-propadiene mixture from their steam cracked ethylene and propylene streams. The simple acetylene is sold as welding gas, and the C, stream is sold as starting material for chemical synthesis. 

Severity - [SEMCONDUCTORS - COMPOUND SEMICONDUCTORS] (Vol21) -extent of cracking [ETHYLENE] (Vol 9)... 

Catalytic cracking Ethylene Propylene Butylenes Higher olefins... 

Ethylene is prepared from petroleum by a process called cracking. Ethylene is the most widely produced organic chemical, serving as the starting material not only for the polymer polyethylene, a widely used plastic, but also for many other useful organic compounds, as shown in Figure 10.4. 

Fig. 4 represents a simplified schematic flow diagram for an ethane and/or propane cracking ethylene plant. The separation sequences are shown as follows ... 

Fig. 4 Simplified schematic flow diagram for a typical ethane/propane cracking ethylene plant.

Section, which appears every month. It also has a special section on Patents which lists new patents according to their classification. The Process Issue of the Petroleum Refiner is now carrying a special section on Petrochemical Processes. In the September 1952 issue for example, Extractive Distillation for Aromatic Recovery, Modified SO2 Extraction for Aromatic Recovery, Udex Extraction, Ethylene Manufacture by Cracking, Ethylene Production, Hypersorption, Hydrocol, Dehydrogenation (for butadiene), and Butadiene Process, were described. These descriptions include the main essentials of the process, simplified flow diagrams, and the name of the company offering it. Formerly these processes were described under the Process Section. 

Tubular reactors are one of the basic types of chemical reactors. Such reactors can either be packed with catalyst or be empty, depending on the reaction system considered. Some examples for catalytic fixed bed tubular reactors are ethylene, sulphur or naphthalene oxidation reactors. On the other hand, hydrocarbon thermal Cracking, ethylene polymerization reactors are typical examples for empty tubular reactors. 

Lubricants Cracked ethylene-propylene-diene polymer United States 3,513,095 1970 Texaco... 

Pure hydrogen can be recovered by a methanation procedure from olefin plant tail gas that contains methane, ethylene and carbon monoxide. Typical methanation catalysts will remove up to 0.3% carbon monoxide and 0.3% ethylene at 270°C, 30 atm pressure and about 6000 h space velocity. A catalyst which does not crack ethylene to form carbon but which can produce ethane or... 

Properly speaking, steam cracking is not a refining process. A key petrochemical process, it has the purpose of producing ethylene, propylene, butadiene, butenes and aromatics (BTX) mainly from light fractions of crude oil (LPG, naphthas), but also from heavy fractions hydrotreated or not (paraffinic vacuum distillates, residue from hydrocracking HOC). 

In a single stage, without liquid recycle, the conversion can be optimized between 60 and 90%. The very paraffinic residue is used to make lubricant oil bases of high viscosity index in the range of 150 N to 350 N the residue can also be used as feedstock to steam cracking plants providing ethylene and propylene yields equal to those from paraffinic naphthas, or as additional feedstock to catalytic cracking units. 

Almost any hydrocarbon can serve as a starting material for production of ethylene and propene Cracking of petroleum (Section 2 16) gives ethylene and propene by processes involving cleavage of carbon-carbon bonds of higher molecular weight hydrocarbons... 

Pyrolysis gasoline is a by-product of the steam cracking of hydrocarbon feeds in ethylene crackers (see Ethylene). Pyrolysis gasoline typically contains about 50—70 wt % aromatics, of which roughly 50% is benzene, 30% is toluene, and 20% is mixed xylenes (which includes EB). 

The price of acetaldehyde duriag the period 1950 to 1973 ranged from 0.20 to 0.22/kg. Increased prices for hydrocarbon cracking feedstocks beginning in late 1973 resulted in higher costs for ethylene and concurrent higher costs for acetaldehyde. The posted prices for acetaldehyde were 0.26/kg in 1974, 0.78/kg in 1985, and 0.92/kg in 1988. The future of acetaldehyde growth appears to depend on the development of a lower cost production process based on synthesis gas and an increase in demand for processes based on acetaldehyde activation techniques and peracetic acid. 

Once the principal route to vinyl chloride, in all but a few percent of current U.S. capacity this has been replaced by dehydrochlorination of ethylene dichloride. A combined process in which hydrogen chloride cracked from ethylene dichloride was added to acetylene was advantageous but it is rarely used because processes to oxidize hydrogen chloride to chlorine with air or oxygen are cheaper (7) (see Vinyl polymers). 

Olefins are produced primarily by thermal cracking of a hydrocarbon feedstock which takes place at low residence time in the presence of steam in the tubes of a furnace. In the United States, natural gas Hquids derived from natural gas processing, primarily ethane [74-84-0] and propane [74-98-6] have been the dominant feedstock for olefins plants, accounting for about 50 to 70% of ethylene production. Most of the remainder has been based on cracking naphtha or gas oil hydrocarbon streams which are derived from cmde oil. Naphtha is a hydrocarbon fraction boiling between 40 and 170°C, whereas the gas oil fraction bods between about 310 and 490°C. These feedstocks, which have been used primarily by producers with refinery affiliations, account for most of the remainder of olefins production. In addition a substantial amount of propylene and a small amount of ethylene ate recovered from waste gases produced in petroleum refineries. 

ElexibiHty allows the operator to pick and choose the most attractive feedstock available at a given point in time. The steam-cracking process produces not only ethylene, but other products as weU, such as propylene, butadiene, butylenes (a mixture of monounsaturated C-4 hydrocarbons), aromatics, etc. With ethane feedstock, only minimal quantities of other products ate produced. As the feedstocks become heavier (ie, as measured by higher molecular weights and boiling points), increasing quantities of other products are produced. The values of these other coproduced products affect the economic attractiveness and hence the choice of feedstock. 

In order to increase the solubiUty parameter of CPD-based resins, vinyl aromatic compounds, as well as other polar monomers, have been copolymerized with CPD. Indene and styrene are two common aromatic streams used to modify cyclodiene-based resins. They may be used as pure monomers or contained in aromatic steam cracked petroleum fractions. Addition of indene at the expense of DCPD in a thermal polymerization has been found to lower the yield and softening point of the resin (55). CompatibiUty of a resin with ethylene—vinyl acetate (EVA) copolymers, which are used in hot melt adhesive appHcations, may be improved by the copolymerization of aromatic monomers with CPD. As with other thermally polymerized CPD-based resins, aromatic modified thermal resins may be hydrogenated. 

Energy source Process designation Feedstock Typical cracked gas concentrations, mol % Acetylene Ethylene ... 

Hoechst HTP Process. The two-stage HTP (high temperature pyrolysis) process was operated by Farbwerke Hoechst ia Germany. The cracking stock for the HTP process can be any suitable hydrocarbon. With hydrocarbons higher than methane, the ratio of acetylene to ethylene can be varied over a range of 70 30 to 30 70. Total acetylene and ethylene yields, as wt % of the feed, are noted ia Table 11. 

---