Coupling reactions catalyst

Reaction conditions N -Dimethyl formamide, room temperature Synthetic strategy One-step amination via coupling reaction Catalyst CuBr, rac-BINOL (I) as ligand... 

Lithiation at C2 can also be the starting point for 2-arylatioii or vinylation. The lithiated indoles can be converted to stannanes or zinc reagents which can undergo Pd-catalysed coupling with aryl, vinyl, benzyl and allyl halides or sulfonates. The mechanism of the coupling reaction involves formation of a disubstituted palladium intermediate by a combination of ligand exchange and oxidative addition. Phosphine catalysts and salts are often important reaction components. 

The peroxo species can oxidize other reactants, Hquids, catalyst, or final product in the subsequent coupling reaction. One example of such oxidation is observed in the preparation of triphenylphosphine (13—15). If this reaction is hydrolyzed in air instead of an inert N2 atmosphere, then the amount of triphenylphosphine oxide increases from less than 1 wt % to greater than 15 wt %. 

Polymerization by G—G Goupling. An aromatic carbon—carbon coupling reaction has been employed for the synthesis of rigid rod-like polyimides from imide-containing dibromo compounds and aromatic diboronic acids ia the presence of palladium catalyst, Pd[P(CgH )2]4 (79,80). 

Alkyl- and aryl-pyridazines can be prepared by cross-coupling reactions between chloropyridazines and Grignard reagents in the presence of nickel-phosphine complexes as catalysts. Dichloro[l,2-bis(diphenylphosphino)propane]nickel is used for alkylation and dichloro[l,2-bis(diphenylphosphino)ethane]nickel for arylation (78CPB2550). 3-Alkynyl-pyridazines and their A-oxides are prepared from 3-chloropyridazines and their A-oxides and alkynes using a Pd(PPh3)Cl2-Cu complex and triethylamine (78H(9)1397). 

The reaction shown above for the steam reforming of methatie led to die formation of a mixture of CO and H2, die so-called synthesis gas. The mixture was given this name since it can be used for the preparation of a large number of organic species with the use of an appropriate catalyst. The simplest example of this is the coupling reaction in which medrane is converted to ethane. The process occurs by the dissociative adsorption of methane on the catalyst, followed by the coupling of two methyl radicals to form ethane, which is then desorbed into the gas phase. 

A closer analysis of die equilibrium products of the 1 1 mixture of methane and steam shows the presence of hydrocarbons as minor constituents. Experimental results for die coupling reaction show that the yield of hydrocarbons is dependent on the redox properties of the oxide catalyst, and the oxygen potential of the gas phase, as well as die temperamre and total pressure. In any substantial oxygen mole fraction in the gas, the predominant reaction is the formation of CO and the coupling reaction is a minor one. 

The lithium oxide-promoted barium oxide also functions as a catalyst for the methane coupling reaction, but the mechanism is not clearly understood at the present time. The only comment that might be offered here is that the presence of ions on the surface of this material might etdrance the formation of methyl radicals drrough the formation of hydroxyl groups thus... 

The coupling reaction proceeds better when a rigorously degassed Raney nickel catalyst is used, but a nickel catalyst prepared by a much simplifled procedure (Note 9) is also effective. The coupling may also be promoted by other elements, including copper and palladium. 

They have also developed a route to 2-allenylindole derivatives (98T13929). When prop-2-ynyl carbonates (76) are reacted with 73 in the presence of palladium catalyst, a cross-coupling reaction occurs to give 77a (46%) and 77b (45%). Under a pressurized carbon monoxide atmosphere (10 atm), the palladium-catalyzed reaction of 73 with 78 provides 79a (60%) and 79b (60%) (2000H2201). In a similar reaction, when the substrate is changed to aryl halides (80), 2-aryl-1-methoxyindoles such as 81a (70%) and 81b (60%) are prepared (97H2309). 

A number of StHle coupling reactions have been reported by Handy et al. [95]. With PdCl2(PhCN)2/Ph3As/Cul in [BMlM][Bp4], good yields and good catalyst recyclability (up to five times) were reported for the reaction between a-iodenones and vinyl and aryl stannanes (Scheme 5.2-19). However, the reported reaction rates were significantly lower than those obtained in NMP. 

The ease of formation of the carbene depends on the nucleophilicity of the anion associated with the imidazolium. For example, when Pd(OAc)2 is heated in the presence of [BMIM][Br], the formation of a mixture of Pd imidazolylidene complexes occurs. Palladium complexes have been shown to be active and stable catalysts for Heck and other C-C coupling reactions [34]. The highest activity and stability of palladium is observed in the ionic liquid [BMIM][Brj. Carbene complexes can be formed not only by deprotonation of the imidazolium cation but also by direct oxidative addition to metal(O) (Scheme 5.3-3). These heterocyclic carbene ligands can be functionalized with polar groups in order to increase their affinity for ionic liquids. While their donor properties can be compared to those of donor phosphines, they have the advantage over phosphines of being stable toward oxidation. 

In the direct coupling reaction (Scheme 30), it is presumed that a coordinatively unsaturated 14-electron palladium(o) complex such as bis(triphenylphosphine)palladium(o) serves as the catalytically active species. An oxidative addition of the organic electrophile, RX, to the palladium catalyst generates a 16-electron palladium(n) complex A, which then participates in a transmetalation with the organotin reagent (see A—>B). After facile trans- cis isomerization (see B— C), a reductive elimination releases the primary organic product D and regenerates the catalytically active palladium ) complex. 

Experience in PTC with cationic catalysts showed that, in general, the most suitable compounds have symmetrical structures, are lipophilic, and have the active cationic charge centrally located or sterically shielded by substituents. For anionic catalysis sodium tetraphenylborate fulfills these conditions, but it is not stable under acidic conditions. However, certain derivatives of this compound, namely sodium tetra-kis[3,5-bis(trifluoromethyl)phenyl]borate (TFPB, 12.162) and sodium tetrakis[3,5-bis-(l,l,l,3,3,3-hexafluoro-2-methoxy-2-propyl)phenyl]borate (HFPB) are sufficiently stable to be used as PTC catalysts for azo coupling reactions (Iwamoto et al., 1983b 1984 Nishida et al., 1984). These fluorinated tetraphenylborates were found to catalyze strongly azo coupling reactions, some of which were carried out with the corresponding diazotization in situ. 

Carbon-carbon bond formation reactions and the CH activation of methane are another example where NHC complexes have been used successfully in catalytic applications. Palladium-catalysed reactions include Heck-type reactions, especially the Mizoroki-Heck reaction itself [171-175], and various cross-coupling reactions [176-182]. They have also been found useful for related reactions like the Sonogashira coupling [183-185] or the Buchwald-Hartwig amination [186-189]. The reactions are similar concerning the first step of the catalytic cycle, the oxidative addition of aryl halides to palladium(O) species. This is facilitated by electron-donating substituents and therefore the development of highly active catalysts has focussed on NHC complexes. 

Other coupling reactions were also employed to prepare poly(arylene etherjs. Polymerization of bis(aryloxy) monomers was demonstrated to occur in the presence of an Fe(III) chloride catalyst via a cation radical mechanism (Scholl reaction).134 This reaction also involves carbon-carbon bond formation and has been used to prepare soluble poly(ether sulfone)s, poly(ether ketone)s, and aromatic polyethers. 

---