Copolymer tackifier

HMPSA - TP elastomers such as styrene block copolymers, tackifier resin, plasticizers, fillers, stabilizers. 

Shell Oil Co. EB/UV radiation cure of composition comprising a monoalkenyl arene/conjugated diene block copolymer, tackifying resin, and a di-tetra functional acrylate or methacrylate selected from the group consisting of acrylic and methacrylic acid esters of polyols. Improved high-temperature properties and solvent resistance. PSA properties,... 

The adhesives discussed above are all applied in the solution and hot-melt forms. These are pressure-sensitive at room temperature. These materials may be based on EVA copolymers tackified with various resins and softeners. They produce rather soft adhesives with poor cohesive strength. Their use is small, mostly on label stock. Of wider interest are hot-melt adhesives based on the block copolymers of styrene with butadiene or isoprene. Vinyl ether polymers are also used, particularly in medicinal self-adhering plasters or dressings. ... 

Kraton 107 block copolymer tackified with Polyester Aluminum 24 (13) [40] 1,500(40] ... 

Emulsion Adhesives. The most widely used emulsion-based adhesive is that based upon poly(vinyl acetate)—poly(vinyl alcohol) copolymers formed by free-radical polymerization in an emulsion system. Poly(vinyl alcohol) is typically formed by hydrolysis of the poly(vinyl acetate). The properties of the emulsion are derived from the polymer employed in the polymerization as weU as from the system used to emulsify the polymer in water. The emulsion is stabilized by a combination of a surfactant plus a coUoid protection system. The protective coUoids are similar to those used paint (qv) to stabilize latex. For poly(vinyl acetate), the protective coUoids are isolated from natural gums and ceUulosic resins (carboxymethylceUulose or hydroxyethjdceUulose). The hydroHzed polymer may also be used. The physical properties of the poly(vinyl acetate) polymer can be modified by changing the co-monomer used in the polymerization. Any material which is free-radically active and participates in an emulsion polymerization can be employed. Plasticizers (qv), tackifiers, viscosity modifiers, solvents (added to coalesce the emulsion particles), fillers, humectants, and other materials are often added to the adhesive to meet specifications for the intended appHcation. Because the presence of foam in the bond line could decrease performance of the adhesion joint, agents that control the amount of air entrapped in an adhesive bond must be added. Biocides are also necessary many of the materials that are used to stabilize poly(vinyl acetate) emulsions are natural products. Poly(vinyl acetate) adhesives known as "white glue" or "carpenter s glue" are available under a number of different trade names. AppHcations are found mosdy in the area of adhesion to paper and wood (see Vinyl polymers). 

Pentaerythritol in rosin ester form is used in hot-melt adhesive formulations, especially ethylene—vinyl acetate (EVA) copolymers, as a tackifier. Polyethers of pentaerythritol or trim ethyl ol eth an e are also used in EVA and polyurethane adhesives, which exhibit excellent bond strength and water resistance. The adhesives maybe available as EVA melts or dispersions (90,91) or as thixotropic, one-package, curable polyurethanes (92). Pentaerythritol spko ortho esters have been used in epoxy resin adhesives (93). The EVA adhesives are especially suitable for cellulose (paper, etc) bonding. 

Pressure sensitive adhesives typically employ a polymer, a tackifier, and an oil or solvent. Environmental concerns are moving the PSA industry toward aqueous systems. Polymers employed in PSA systems are butyl mbber, natural mbber (NR), random styrene—butadiene mbber (SBR), and block copolymers. Terpene and aUphatic resins are widely used in butyl mbber and NR-based systems, whereas PSAs based on SBR may require aromatic or aromatic modified aUphatic resins. 

New vinyl acetate—acrylate (VAA) emulsion copolymers stabilized with poly(vinyl alcohol) have been developed. The acryflc component of the VAAs contributes to improved compatibiUty with tackifiers (143). 

Among the different pressure sensitive adhesives, acrylates are unique because they are one of the few materials that can be synthesized to be inherently tacky. Indeed, polyvinylethers, some amorphous polyolefins, and some ethylene-vinyl acetate copolymers are the only other polymers that share this unique property. Because of the access to a wide range of commercial monomers, their relatively low cost, and their ease of polymerization, acrylates have become the dominant single component pressure sensitive adhesive materials used in the industry. Other PSAs, such as those based on natural rubber or synthetic block copolymers with rubbery midblock require compounding of the elastomer with low molecular weight additives such as tackifiers, oils, and/or plasticizers. The absence of these low molecular weight additives can have some desirable advantages, such as ... 

Thermoplastic block copolymers were used for pressure-sensitive and hot-melt rubber adhesives as from the middle sixties. These adhesives found application in packaging, disposable diapers, labels and tapes, among other industrial markets. The formulation of these adhesives generally includes an elastomer (generally containing styrene endblocks and either isoprene, butadiene or ethylene-butylene midblocks) and a tackifier (mainly a rosin derivative or hydrocarbon resin). 

Butyl rubber (BR) and polyisobutylene (PIB) are widely used in adhesives as primary elastomeric binders and as tackifiers and modifiers. The main difference between these polymers is that butyl is a copolymer of isobutylene with a minor amount of isoprene (which introduces unsaturation due to carbon-carbon double bonds), while polyisobutylene is a homopolymer. 

Block copolymers can contain crystalline or amorphous hard blocks. Examples of crystalline block copolymers are polyurethanes (e.g. B.F. Goodrich s Estane line), polyether esters (e.g. Dupont s Hytrel polymers), polyether amides (e.g. Atofina s Pebax grades). Polyurethanes have enjoyed limited utility due to their relatively low thermal stability use temperatures must be kept below 275°F, due to the reversibility of the urethane linkage. Recently, polyurethanes with stability at 350°F for nearly 100 h have been claimed [2]. Polyether esters and polyether amides have been explored for PSA applications where their heat and plasticizer resistance is a benefit [3]. However, the high price of these materials and their multiblock architecture have limited their use. All of these crystalline block copolymers consist of multiblocks with relatively short, amorphous, polyether or polyester mid-blocks. Consequently they can not be diluted as extensively with tackifiers and diluents as styrenic triblock copolymers. Thereby it is more difficult to obtain strong, yet soft adhesives — the primary goals of adding rubber to hot melts. 

Standard-grade PSAs are usually made from styrene-butadiene rubber (SBR), natural rubber, or blends thereof in solution. In addition to rubbers, polyacrylates, polymethylacrylates, polyfvinyl ethers), polychloroprene, and polyisobutenes are often components of the system ([198], pp. 25-39). These are often modified with phenolic resins, or resins based on rosin esters, coumarones, or hydrocarbons. Phenolic resins improve temperature resistance, solvent resistance, and cohesive strength of PSA ([196], pp. 276-278). Antioxidants and tackifiers are also essential components. Sometimes the tackifier will be a lower molecular weight component of the high polymer system. The phenolic resins may be standard resoles, alkyl phenolics, or terpene-phenolic systems ([198], pp. 25-39 and 80-81). Pressure-sensitive dispersions are normally comprised of special acrylic ester copolymers with resin modifiers. The high polymer base used determines adhesive and cohesive properties of the PSA. 

NR, styrene-butadiene mbber (SBR), polybutadiene rubber, nitrile mbber, acrylic copolymer, ethylene-vinyl acetate (EVA) copolymer, and A-B-A type block copolymer with conjugated dienes have been used to prepare pressure-sensitive adhesives by EB radiation [116-126]. It is not necessary to heat up the sample to join the elastomeric joints. This has only been possible due to cross-linking procedure by EB irradiation [127]. Polyfunctional acrylates, tackifier resin, and other additives have also been used to improve adhesive properties. Sasaki et al. [128] have studied the EB radiation-curable pressure-sensitive adhesives from dimer acid-based polyester urethane diacrylate with various methacrylate monomers. Acrylamide has been polymerized in the intercalation space of montmorillonite using an EB. The polymerization condition has been studied using a statistical method. The product shows a good water adsorption and retention capacity [129]. 

Styrene Copolymers. The so-called thermoplastic rubbers based on styrene-butadiene-styrene and styrene-isoprene-styrene block copolymers can be used for hot-melt adhesives, particularly when extended with tackifying resins and oils. They can be made into pressure-sensitive adhesives, as melts with low viscosity—being applied from fine spinnerets which are oscillated to make a... 

Poly(vinyl ethers) have extensive uses as nonmigrating tackifiers in adhesives and particularly pressure-sensitive tapes and labels, as viscosity-index improvers in lubricants and as plasticizers in coatings, films, and elastomers. They are available and used in dry state, solution or as blends with a wide variety of compatible polymers and copolymers. 

---