Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Containment chemical composition

Samples were tested on in a melt of salts (75% Na SO, 25% NaCl) at 950°C in an air atmosphere for 24 hours. Micro X-rays spectrum by the analysis found that the chemical composition of carbides of an alloy of the ZMI-3C and test alloys differs noticeably. In the monocarbide of phase composition of an alloy of the ZMI-3C there increased concentration of titanium and tungsten is observed in comparison with test alloys containing chemical composition tantalum. The concentration of more than 2% of tantalum in test alloys has allowed mostly to deduce tungsten from a mono carbide phase (MC) into solid solution. Thus resistance of test alloys LCD has been increased essentially, as carbide phase is mostly sensitive aggressive environments influence. The critical value of total molybdenum and tungsten concentration in MC should not exceed 15%. [Pg.437]

Source characterization results are not located in a centralized facility which is constantly updated. The Environmental Protection Agency has established the Environmental Assessment Data System (EADS) (31) which contains chemical compositions of particulate matter emissions tests. This existing computerized structure can provide the centralized location for receptor model source characterization information. Procedures such as those described for ambient data in the previous section need to be developed in order to allow receptor model users access to this data base over telephone lines. The data required of receptor model source tests should be incorporated into the EADS, and source characterization results should report this information in an EADS compatible format. [Pg.101]

Structural keys describe the chemical composition and structural motifs of molecules represented as a Boolean array. If a certain structural feature is present in a molecule or a substructure, a particular bit is set to 1 (true), otherwise to 0 (false). A bit in this array may encode a particular functional group (such as a carboxylic acid or an amidelinkage), a structural element (e.g., a substituted cyclohexane), or at least n occurrences of a particular element (e.g., a carbon atom). Alternatively, the structural key can be defined as an array of integers where the elements of this array contain the frequency of a specific feature in the molecule. [Pg.403]

The tables in this section contain values of the enthalpy and Gibbs energy of formation, entropy, and heat capacity at 298.15 K (25°C). No values are given in these tables for metal alloys or other solid solutions, for fused salts, or for substances of undefined chemical composition. [Pg.532]

Sample Preservation Without preservation, many solid samples are subject to changes in chemical composition due to the loss of volatile material, biodegradation, and chemical reactivity (particularly redox reactions). Samples stored at reduced temperatures are less prone to biodegradation and the loss of volatile material, but fracturing and phase separations may present problems. The loss of volatile material is minimized by ensuring that the sample completely fills its container without leaving a headspace where gases can collect. Samples collected from materials that have not been exposed to O2 are particularly susceptible to oxidation reactions. For example, the contact of air with anaerobic sediments must be prevented. [Pg.198]

Chemical Composition. From the point of view of leathermaking, hides consist of four broad classes of proteins coUagen, elastin, albumen, and keratin (3). The fats are triglycerides and mixed esters. The hides as received in a taimery contain water and a curing agent. Salt-cured cattie hides contain 40—50% water and 10—20% ordinary salt, NaCl. Surface dirt is usuaUy about 2—5 wt %. Cattie hides have 5—15% fats depending on the breed and source. The balance of the hide is protein (1). [Pg.81]

The physical and mechanical properties of steel depend on its microstmcture, that is, the nature, distribution, and amounts of its metaHographic constituents as distinct from its chemical composition. The amount and distribution of iron and iron carbide determine most of the properties, although most plain carbon steels also contain manganese, siUcon, phosphoms, sulfur, oxygen, and traces of nitrogen, hydrogen, and other chemical elements such as aluminum and copper. These elements may modify, to a certain extent, the main effects of iron and iron carbide, but the influence of iron carbide always predominates. This is tme even of medium alloy steels, which may contain considerable amounts of nickel, chromium, and molybdenum. [Pg.384]

Wax usually refers to a substance that is a plastic solid at ambient temperature and that, on being subjected to moderately elevated temperatures, becomes a low viscosity hquid. Because it is plastic, wax usually deforms under pressure without the appHcation of heat. The chemical composition of waxes is complex all of the products have relatively wide molecular weight profiles, with the functionaUty ranging from products that contain mainly normal alkanes to those that are mixtures of hydrocarbons and reactive functional species. [Pg.314]

Wool belongs to the family of proteins (qv) called keratins. However, morphologically the fiber is a composite and each of the components differs in chemical composition. Principally the components are proteinaceous, although wool cleaned of wax, suint, and other extraneous materials acquired during growth contains small amounts of Hpids (stmctural and free), trace elements, and, in colored fibers, pigments called melanin. [Pg.342]

Chemical Composition. Wool wax is a complex mixture of esters of water-soluble alcohols (168) and higher fatty acids (169) with a small proportion (ca 0.5%) of hydrocarbons (170). A substantial effort has been made to identify the various components, but results are compHcated by the fact that different workers use wool waxes from different sources and employ different analytical techniques. Nevertheless, significant progress has been made, and it is possible to give approximate percentages of the various components. The wool-wax acids (Table 9) are predominantiy alkanoic, a-hydroxy, and CO-hydroxy acids. Each group contains normal, iso, and anteiso series of various chain length, and nearly all the acids are saturated. [Pg.354]

Chromium-containing wood preservatives and their chemical compositions are Hsted ia Table 13 (199). Chromium compounds have a triple function ia wood preservation (200). Most importantiy, after impregnation of the wood the Cr(VI) compounds used ia the formulations react with the wood extractives and the other preservative salts to produce relatively insoluble complexes from which preservative leaches only very slowly. This mechanism has been studied in the laboratory (201—206) and the field (207). Finally, although most of the chromium is reduced to chromium (ITT), there is probably some slight contribution of the chromium (VT) to the preservative value (208). [Pg.147]

The chemical composition of vermiculite can be quite variable (145). The megascopic varieties are generally trioctahedral, and the clay-si2e varieties contain both dioctahedral and trioctahedral varieties (144). Smectite minerals do not commonly occur as macroscopic single crystals. [Pg.199]

As we have already seen, when an alloy contains more of the alloying element than the host metal can dissolve, it will split up into two phases. The two phases are "stuck" together by interphase boundaries which, again, have special properties of their own. We look first at two phases which have different chemical compositions but the same crystal structure (Fig. 2.5a). Provided they are oriented in the right way, the crystals can be made to match up at the boundary. Then, although there is a sharp change in... [Pg.19]


See other pages where Containment chemical composition is mentioned: [Pg.58]    [Pg.58]    [Pg.302]    [Pg.195]    [Pg.251]    [Pg.401]    [Pg.34]    [Pg.358]    [Pg.448]    [Pg.125]    [Pg.324]    [Pg.158]    [Pg.459]    [Pg.379]    [Pg.1]    [Pg.2]    [Pg.2]    [Pg.203]    [Pg.472]    [Pg.134]    [Pg.497]    [Pg.342]    [Pg.508]    [Pg.317]    [Pg.407]    [Pg.144]    [Pg.193]    [Pg.344]    [Pg.397]    [Pg.449]    [Pg.458]    [Pg.238]    [Pg.527]    [Pg.146]    [Pg.1440]    [Pg.216]    [Pg.142]    [Pg.522]   
See also in sourсe #XX -- [ Pg.443 ]




SEARCH



Chemicals containers

Chemicals containment

© 2024 chempedia.info