Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Components in salts

In your laboratory work you will deal mostly with liquid solutions. Liquid solutions can be made by mixing two liquids (for example, alcohol and water), by dissolving a gas in a liquid (for example, carbon dioxide and water), or by dissolving a solid in a liquid (for example, sugar and water). The result is a homogeneous system containing more than one substance—a solution. In such a liquid, each component is diluted by the other component. In salt water, the salt... [Pg.71]

TRANSFER FLUXES OF Cu, Cr, Ni, AND Zn AMONG SOLID-PHASE COMPONENTS IN SALT-CONTAMINATED ISRAELI ARID SOILS... [Pg.194]

IR-2.15.3.3 Ordering characteristic groups for substitutive nomenclature IR-2.15.3.4 Ordering ligands in formulae and names IR-2.15.3.5 Ordering components in salt formulae and names IR-2.15.3.6 Isotopic modification IR-2.15.3.7 Stereochemical priorities IR-2.15.3.8 Hierarchical ordering of punctuation marks IR-2.16 Final remarks IR-2.17 References... [Pg.16]

Furthermore, it is the system. Hydrate I/Hydrate II (or Anhydrous Salt), that possesses a definite pressure at a particular temperature this is independent of the relative amounts, but is dependent upon the nature of the two components in equilibrium. It is incorrect, therefore, to speak of the vapour pressure of a salt hydrate. ... [Pg.41]

Molten cryohte dissolves many salts and oxides, forming solutions of melting point lower than the components. Figure 1 combines the melting point diagrams for cryolite—A1F. and for cryohte—NaF. Cryohte systems ate of great importance in the HaH-Heroult electrolysis process for the manufacture of aluminum (see Aluminumand ALUMINUM alloys). Table 5 Hsts the additional examples of cryohte as a component in minimum melting compositions. [Pg.143]

Its chief use is as a component in photographic developers. Because the free compound is unstable in air and light, it is usually marketed as the sulfate salt [55-55-0] Metol, mp 260°C (dec.). It also finds appHcation as an intermediate for fur and hair dyes and, under certain circumstances, as a corrosion inhibitor for steel. Prolonged exposure to 4-(/V-methy1amino)pheno1 has been associated with the development of dermatitis and allergies. [Pg.315]

Ammonium sulfate [7783-20-2], (NH 2 U4, is a white, soluble, crystalline salt having a formula wt of 132.14. The crystals have a rhombic stmcture d is 1.769. An important factor in the crystallization of ammonium sulfate is the sensitivity of its crystal habit and size to the presence of other components in the crystallizing solution. If heated in a closed system ammonium sulfate melts at 513 2° C (14) if heated in an open system, the salt begins to decompose at 100°C, giving ammonia and ammonium bisulfate [7803-63-6], NH HSO, which melts at 146.9°C. Above 300°C, decomposition becomes more extensive giving sulfur dioxide, sulfur trioxide, water, and nitrogen, in addition to ammonia. [Pg.367]

Other components in the feed gas may react with and degrade the amine solution. Many of these latter reactions can be reversed by appHcation of heat, as in a reclaimer. Some reaction products cannot be reclaimed, however. Thus to keep the concentration of these materials at an acceptable level, the solution must be purged and fresh amine added periodically. The principal sources of degradation products are the reactions with carbon dioxide, carbonyl sulfide, and carbon disulfide. In refineries, sour gas streams from vacuum distillation or from fluidized catalytic cracking (FCC) units can contain oxygen or sulfur dioxide which form heat-stable salts with the amine solution (see Fluidization Petroleum). [Pg.211]

Pipes, valves, fittings, and almost all other components of small equipment are now available in plastic or ceramics, which do not corrode in salt water and are less expensive than the metals now used. Synthetic detergents are now available for use with seawater, although a final rinse with freshwater may be desired. Saltwater sewage can be treated successfully. Dual water systems using freshwater and seawater are already in use on ships and in many island resort hotels. Many of these also have seawater systems for fire fighting. This trend will grow. [Pg.237]

Two or more soHd catalyst components can be mixed to produce a composite that functions as a supported catalyst. The ingredients may be mixed as wet or dry powders and pressed into tablets, roUed into spheres, or pelletized, and then activated. The promoted potassium ferrite catalysts used to dehydrogenate ethylbenzene in the manufacture of styrene or to dehydrogenate butanes in the manufacture of butenes are examples of catalysts manufactured by pelletization and calcination of physically mixed soHd components. In this case a potassium salt, iron oxide, and other ingredients are mixed, extmded, and calcined to produce the iron oxide-supported potassium ferrite catalyst. [Pg.195]

In ceramics, plasticity is usually evaluated by means of the water of plasticity. Values for the common clay minerals are given in Table 1. Each clay mineral can be expected to show a range of values because particle size, exchangeable ion composition, and crystallinity of the clay mineral also exert an influence. Nonclay mineral components, soluble salts, organic compounds, and texture can also affect the water of plasticity. [Pg.204]

Cobalt is one of twenty-seven known elements essential to humans (28) (see Mineral NUTRIENTS). It is an integral part of the cyanocobalamin [68-19-9] molecule, ie, vitamin B 2> only documented biochemically active cobalt component in humans (29,30) (see Vitamins, VITAMIN Vitamin B 2 is not synthesized by animals or higher plants, rather the primary source is bacterial flora in the digestive system of sheep and cattle (8). Except for humans, nonmminants do not appear to requite cobalt. Humans have between 2 and 5 mg of vitamin B22, and deficiency results in the development of pernicious anemia. The wasting disease in sheep and cattle is known as bush sickness in New Zealand, salt sickness in Florida, pine sickness in Scotland, and coast disease in AustraUa. These are essentially the same symptomatically, and are caused by cobalt deficiency. Symptoms include initial lack of appetite followed by scaliness of skin, lack of coordination, loss of flesh, pale mucous membranes, and retarded growth. The total laboratory synthesis of vitamin B 2 was completed in 65—70 steps over a period of eleven years (31). The complex stmcture was reported by Dorothy Crowfoot-Hodgkin in 1961 (32) for which she was awarded a Nobel prize in 1964. [Pg.379]

It is not difficult to incorporate this result into the general mechanism for hydrogen halide additions. These products are formed as the result of solvent competing with halide ion as the nucleophilic component in the addition. Solvent addition can occur via a concerted mechanism or by capture of a carbocation intermediate. Addition of a halide salt increases the likelihood of capture of a carbocation intermediate by halide ion. The effect of added halide salt can be detected kinetically. For example, the presence of tetramethylammonium... [Pg.355]

Reactions of contaminants in the fuel or air in the combustion zone can result in the formation of compounds which can condense as molten salts onto cooler components in the system. This type of process can occur when fuels containing sulphur or vanadium are burnt. In the case of sulphur contaminants, alkali sulphates form by reactions with sodium which may also be present in the fuel or in the combustion air, and for vanadium-containing fuels low-melting-point sodium vanadates or vanadium pentoxide are produced, particularly when burning residual oils high in vanadium. Attack by molten salts has many features in common which will be illustrated for the alkali-sulphate-induced attack, but which will be subsequently shown to be relevant to the case of vanadate attack. [Pg.1064]

A series of experiments have been undertaken to evaluate the relevant thermodynamic properties of a number of binary lithium alloy systems. The early work was directed towards determination of their behavior at about 400 °C because of interest in their potential use as components in molten salt batteries operating in that general temperature range. Data for a number of binary lithium alloy systems at about 400 °C are presented in Table 1. These were mostly obtained by the use of an experimental arrangement employing the LiCl-KCl eutectic molten salt as a lithiumconducting electrolyte. [Pg.363]

If the solubility of either component in the other is unlimited ( free miscibility, as with alcohol and water), there may be an infinite number of solutions, lying between the two pure substances as limiting cases. The solubility may be limited in one or both directions. Thus, water and salt form a series of solutions extending indefinitely towards pure water as one limit, but bounded by saturated salt solution as the other limit water and ether form a continuous series of solutions bounded on one side by a saturated solution of ether in water, and on the other side by a saturated solution of water in ether. In the region of continuous miscibility all the properties of the solution vary... [Pg.262]

Two components in one phase, e.g.f the electrolytic dissociation of a salt in aqueous solution ... [Pg.369]


See other pages where Components in salts is mentioned: [Pg.57]    [Pg.452]    [Pg.44]    [Pg.542]    [Pg.27]    [Pg.57]    [Pg.452]    [Pg.44]    [Pg.542]    [Pg.27]    [Pg.143]    [Pg.1091]    [Pg.232]    [Pg.30]    [Pg.528]    [Pg.71]    [Pg.225]    [Pg.219]    [Pg.407]    [Pg.455]    [Pg.248]    [Pg.380]    [Pg.456]    [Pg.159]    [Pg.265]    [Pg.457]    [Pg.268]    [Pg.661]    [Pg.862]    [Pg.271]    [Pg.350]    [Pg.2]    [Pg.1300]    [Pg.71]    [Pg.427]    [Pg.546]    [Pg.425]    [Pg.113]   
See also in sourсe #XX -- [ Pg.40 , Pg.44 ]




SEARCH



© 2024 chempedia.info