Cobalt organic complexation

Bonding Agents. These materials are generally only used in wire cable coat compounds. They are basically organic complexes of cobalt and cobalt—boron. In wire coat compounds they are used at very low levels of active cobalt to aid in the copper sulfide complex formation that is the primary adherance stmcture. The copper sulfide stmcture builds up at the brass mbber interface through copper in the brass and sulfur from the compound. The dendrites of copper sulfide formed entrap the polymer chains before the compound is vulcanized thus hoi ding the mbber firmly to the wire. 

Generally, most asphalts are 79—88 wt % C, 7—13 wt % H, trace-8 wt % S, 2—8 wt % O, and trace-3 wt % N (Table 7). Trace metals such as iron, nickel, vanadium, calcium, titanium, magnesium, sodium, cobalt, copper, tin, and 2inc, occur in cmde oils. Vanadium and nickel are bound in organic complexes and, by virtue of the concentration (distillation) process by which asphalt is manufactured, are also found in asphalt. 

As already mentioned, complexes of chromium(iii), cobalt(iii), rhodium(iii) and iridium(iii) are particularly inert, with substitution reactions often taking many hours or days under relatively forcing conditions. The majority of kinetic studies on the reactions of transition-metal complexes have been performed on complexes of these metal ions. This is for two reasons. Firstly, the rates of reactions are comparable to those in organic chemistry, and the techniques which have been developed for the investigation of such reactions are readily available and appropriate. The time scales of minutes to days are compatible with relatively slow spectroscopic techniques. The second reason is associated with the kinetic inertness of the products. If the products are non-labile, valuable stereochemical information about the course of the substitution reaction may be obtained. Much is known about the stereochemistry of ligand substitution reactions of cobalt(iii) complexes, from which certain inferences about the nature of the intermediates or transition states involved may be drawn. This is also the case for substitution reactions of square-planar complexes of platinum(ii), where study has led to the development of rules to predict the stereochemical course of reactions at this centre. 

The cobalt cyanide complexes are excellent catalysts for the homogeneous hydrogenation at room temperature of a variety of organic (and inorganic)... 

Many of these cobalt complexes will catalyze the reduction of organic compounds by borohydride, hydrazine, thiols, etc. Cobalt cyanide complexes will catalyze the reduction of a,j8-unsaturated acids by borohydride (105) DMG complexes the reduction of butadiene and isoprene by borohydride, but not by H2 (124) Co(II) salen, the reduction of CHCI3 and CH3CCI3 to the dichloro compounds by borohydride (116) and cyanocobalamin, the selective reduction of -CCI2- by borohydride to -CHCl- in compounds such as aldrin, isodrin, dieldrin, and endrin without... 

The given structure shows two molecules of TTA to have reacted with a cobalt ion to form the cobalt-TTA complex, in which the cobalt atom forms a valence bond solid lines) with one, and a coordinate bond (broken lines) with the other, oxygen atom of each TTA molecule. Thus, in the cobalt-TTA complex there is a six-membered ring formed by each TTA molecule with the cobalt atom. Metal chelate complexes of this type have good stability, they are nonpolar and soluble in the organic phase. The usefulness of the chelating extractants in solvent extraction is therefore obvious. 

Little is known of the oceanic distribution or speciation of cobalt, because very low concentrations (< 200 pM) make its determination difficult. Laboratory studies indicate that cobalt exists in seawater primarily as the cobalt (II) ion and as the carbonate complex. Organic complexes are not considered important. 

Armannsson [659] has described a procedure involving dithizone extraction and flame atomic absorption spectrometry for the determination of cadmium, zinc, lead, copper, nickel, cobalt, and silver in seawater. In this procedure 500 ml of seawater taken in a plastic container is exposed to a 1000 W mercury arc lamp for 5-15 h to break down metal organic complexes. The solution is adjusted to pH 8, and 10 ml of 0.2% dithizone in chloroform added. The 10 ml of chloroform is run off and after adjustment to pH 9.5 the aqueous phase is extracted with a further 10 ml of dithizone. The combined extracts are washed with 50 ml of dilute ammonia. To the organic phases is added 50 ml of 0.2 M-hydrochloric acid. The phases are separated and the aqueous portion washed with 5 ml of chloroform. The aqueous portion is evaporated to dryness and the residue dissolved in 5 ml of 2 M hydrochloric acid (solution A). Perchloric acid (3 ml) is added to the organic portion, evaporated to dryness, and a further 2 ml of 60% perchloric acid added to ensure that all organic matter has been... 

Burdo and Seitz reported in 1975 the mechanism of the formation of a cobalt peroxide complex as the important intermediate leading to luminescence in the cobalt catalysis of the luminol CL reaction [116]. Delumyea and Hartkopf reported metal catalysis of the luminol reaction in chromatographic solvent systems in 1976 [117], while Yurow and Sass [118] reported on the structure-CL correlation for various organic compounds in the luminol-peroxide reaction. 

Hydrolysis of coordinated ligands is a special case of nucleophilic attack. Two examples involving inorganic ligands have already been given in Section II. A on aquation of cobalt(III) complexes. Many further examples will be found in the following Section VII.B on catalysis of hydrolysis of organic substrates by metal ions and complexes. 

The cobalt(I) complexes also react with organic aryl azides to form the terminal cobalt(III) imido complexes [(TIMEN" OCo(NAr )]Cl (Ar = xyl, mes, R — p-PhMe, p-PhOMe) at —35°C (Fig. 17). These deep-green complexes are fully characterized, including NMR, IR, UV-Vis spectroscopy, and combustion analysis 10). These are diamagnetic (d low-spin, S — 0), and the NMR spectra suggest a Ca-symmetry of these molecules in solution. 

The carbon dioxide anion-radical was used for one-electron reductions of nitrobenzene diazo-nium cations, nitrobenzene itself, quinones, aliphatic nitro compounds, acetaldehyde, acetone and other carbonyl compounds, maleimide, riboflavin, and certain dyes (Morkovnik and Okhlobystin 1979). The double bonds in maleate and fumarate are reduced by CO2. The reduced products, on being protonated, give rise to succinate (Schutz and Meyerstein 2006). The carbon dioxide anion-radical reduces organic complexes of Co and Ru into appropriate complexes of the metals(II) (Morkovnik and Okhlobystin 1979). In particular, after the electron transfer from this anion radical to the pentammino-p-nitrobenzoato-cobalt(III) complex, the Co(III) complex with thep-nitrophenyl anion-radical fragment is initially formed. The intermediate complex transforms into the final Co(II) complex with the p-nitrobenzoate ligand. 

Coenzyme B12 is the cofactor form of vitamin B 2, which is unique among all the vitamins in that it contains not only a complex organic molecule but an essential trace element, cobalt. The complex corrin ring system of vitamin B12 (colored blue in Fig. 2), to which cobalt (as Co3+) is coordinated, is chemically related to the porphyrin ring system of heme and heme proteins (see Fig. 5-1). A fifth coordination position of cobalt is filled by dimethylbenzimidazole ribonucleotide (shaded yellow), bound covalently by its 3 -phosphate group to a side chain of the corrin ring, through aminoisopropanol. 

---