Chromatography dilution

Table 2 Activity coefficients of the five solutes in C4mim BI 4, [C4mim][BTA], [C6mim][BTA] or [C8mim][BTA] in comparison to literature data (glc - gas-liquid chromatography, diluter-diluter technique)...

Water (high Sr concentration) Ion chromatography dilution p-GPC No data No data EMMI 2000c, 2000d... 

Forensic Applications of High Performance Liquid Chromatography Dilutions from Stock... 

Methods of determining molecular weight include osmotic pressure, light scattering, gel permeation chromatography, dilute solution viscosity, vapor pressure, freezing temperatures, and others. Odian GC (2004) Principles of polymerization. John Wiley and Sons Inc., New York. Ehas HG (2003) An introduction to plastics. John Wiley and Sons, New York. Slade PE (2001) Polymer molecular weights, vol 4. Marcel Dekker, New York. 

A solution of At-(tcrt-butoxycarbonyl)-6-methoxy-2-methylaniline (11.9 g, 50 mmol) was cooled to — 40°C and s-BuLi (96 ml of 1.3 M in cyclohexane. 125mmol) was added. The mixture was stirred at —45°C to —55°Cfor 30min and then allowed to warm slowly to — 15"C over 60 min. The yellow solution was recooled to —45 C and DMF (5.8 ml, 75 mmol) was added. After 5 min the reaction mixture was diluted with water (250 ml) and the product was extracted with EtOAc (2 x 150 ml). The extract was washed with w ater (200ml) and then concentrated in vacuo. The residue was dissolved in THF (100 ml) and 12 N HCl (2 ml) was added. The solution was stirred for 5 min at room temperature and then diluted with ether (250 ml). The solution was washed with water (250 ml), sat. aq. NaHCOj (250 ml), and brine (250 ml), dried (Na2S04) and evaporated. The product was purified by chromatography using 2% EtOAc in hexane for elution. The yield (9.3 g) was 75%. 

A mixture of l-(r-Boc)indol-2-yl-tri- -butylstannanc (1.2 mmol) and 4-bromo-benzonitrile (1.0 mmol) and Pd(PPh3)2C , (0.02 mmol) in dry dioxane (5 ml) was heated at I00°C overnight under nitrogen. The reaction mixture was cooled, diluted with EtOAc and stirred for 15 min with 15% aq. KF. The precipitate was removed by filtration and washed with EtOAc. The EtOAc layer was separated, washed with brine, dried (Na2S04) and concentrated. The residue was purified by chromatography on silica. The yield was 66%. 

To minimize the mobile phase s contribution to conductivity, an ion-suppressor column is placed between the analytical column and the detector. This column selectively removes mobile-phase electrolyte ions without removing solute ions, for example, in cation ion-exchange chromatography using a dilute solution of HCl as... 

Column Si. Size-exclusion chromatography columns are generally the largest column on a process scale. Separation is based strictly on diffusion rates of the molecules inside the gel particles. No proteins or other solutes are adsorbed or otherwise retained owing to adsorption, thus, significant dilution of the sample of volume can occur, particularly for small sample volumes. The volumetric capacity of this type of chromatography is determined by the concentration of the proteins for a given volume of the feed placed on the column. 

Solution Polymers. Acryflc solution polymers are usually characterized by their composition, solids content, viscosity, molecular weight, glass-transition temperature, and solvent. The compositions of acryflc polymers are most readily determined by physicochemical methods such as spectroscopy, pyrolytic gas—liquid chromatography, and refractive index measurements (97,158). The solids content of acryflc polymers is determined by dilution followed by solvent evaporation to constant weight. Viscosities are most conveniently determined with a Brookfield viscometer, molecular weight by intrinsic viscosity (158), and glass-transition temperature by calorimetry. 

Fig. 3. (a) Flame ionization detector (fid) response to an extract of commercially processed Valencia orange juice, (b) Gas chromatography—olfactometry (geo) chromatogram of the same extract. The abscissa in both chromatograms is a normal paraffin retention index scale ranging between hexane and octadecane (Kovats index). Dilution value in the geo is the -fold that the extract had to be diluted until odor was no longer detectable at each index. 

Analysis. Dilute aqueous solutions of hydroxyhydroquiaone turn blue-green temporarily when mixed with ferric chloride. The solutions darken upon addition of small amounts, and turn red with additions of larger amounts of sodium carbonate. Derivatives used for identification are the picrate, which forms orange-red needles (mp of 96°C), and the triacetate (mp 96—97°C). Thin-layer chromatography and Hquid chromatography are well suited for the quahtative and quantitative estimation of hydroxyhydroquiaone (93,94). 

Among the techniques employed to estimate the average molecular weight distribution of polymers are end-group analysis, dilute solution viscosity, reduction in vapor pressure, ebuUiometry, cryoscopy, vapor pressure osmometry, fractionation, hplc, phase distribution chromatography, field flow fractionation, and gel-permeation chromatography (gpc). For routine analysis of SBR polymers, gpc is widely accepted. Table 1 lists a number of physical properties of SBR (random) compared to natural mbber, solution polybutadiene, and SB block copolymer. 

Molecular weights of PVDC can be determined directly by dilute solution measurements in good solvents (62). Viscosity studies indicate that polymers having degrees of polymerization from 100 to more than 10,000 are easily obtained. Dimers and polymers having DP < 100 can be prepared by special procedures (40). Copolymers can be more easily studied because of thek solubiUty in common solvents. Gel-permeation chromatography studies indicate that molecular weight distributions are typical of vinyl copolymers. 

Preferably, high pressure Hquid chromatography (hplc) is used to separate the active pre- and cis-isomers of vitamin D from other isomers and allows their analysis by comparison with the chromatograph of a sample of pure reference i j -vitainin D, which is equiUbrated to a mixture of pre- and cis-isomers (82,84,85). This method is more sensitive and provides information on isomer distribution as well as the active pre- and cis-isomer content of a vitamin D sample. It is appHcable to most forms of vitamin D, including the more dilute formulations, ie, multivitamin preparations containing at least 1 lU/g (AOAC Methods 979.24 980.26 981.17 982.29 985.27) (82). The practical problem of isolation of the vitamin material from interfering and extraneous components is the limiting factor in the assay of low level formulations. 

---