Chromatic effect

A. Novakov and T. Novakov, Eyewitness The Chromatic Effects of Late Nineteenth-century London Fog, Literary London, vol. 4, http //www.literary-I0nd0n.0rg/l0nd0n-j0urnal/september2006/n0vak0v.html (2006). 

Clark W. J., Ramsey J.D., McCreery R.L. and Frenkel G.S. (2002), A galvanic corrosion approach to investigating chromate effects on aluminum alloy 2024-T3 , J. Electrochem. Soc., 149,B179-85. 

By Oxidation of Alcohols.—Barium manganate is readily available and stable, and has been recommended for the oxidation of primary and secondary alcohols to aldehydes and ketones respectively. Chromic acid adsorbed on to silica geP and the recyclable poly[vinyl(pyridinium chromate)] effect the same changes, while acid-stable primary and secondary alcohols are oxidized rapidly using potassium dichromate, sulphuric acid, methylene chloride, and a phase-transfer catalyst." Benzeneseleninic anhydride is an alternative reagent for the oxidation of alcohols under essentially neutral conditions. ... 

Once the primary electron beam is created, it must be demagnified with condenser lenses and then focused onto the sample with objective lenses. These electron lenses are electromagnetic in nature and use electric and magnetic fields to steer the electrons. Such lenses are subject to severe spherical and chromatic aberrations. Therefore, a point primary beam source is blurred into a primary beam disk to an extent dependent on the energy and energy spread of the primary electrons. In addition, these lenses are also subject to astigmatism. AH three of these effects ultimately limit the primary beam spot size and hence, the lateral resolution achievable with sem. 

Measurement of Whiteness. The Ciba-Geigy Plastic White Scale is effective in the visual assessment of white effects (79), but the availabihty of this scale is limited. Most evaluations are carried out (ca 1993) by instmmental measurements, utilising the GIF chromaticity coordinates or the Hunter Uniform Color System (see Color). Spectrophotometers and colorimeters designed to measure fluorescent samples must have reversed optics, ie, the sample is illuminated by a polychromatic source and the reflected light passes through the analy2er to the detector. 

Numerous modifications of chromium-based catalysts have been made through the introduction of various additives, the most effective of which are titanium alkoxides (38,39). These additives apparentiy reduce surface silyl chromate moieties to chromium titanates, which are then oxidized to titanyl chromates. These catalysts offer a better control of the resin molecular weight (39). 

The most effective way to prevent SCC in both stainless steel and brass systems is to keep the system clean and free of deposits. An effective deposit control treatment is imperative. A good corrosion inhibitor is also beneficial. Chromate and phosphate have each been used successfully to prevent the SCC of stainless steel in chloride solutions. 

Basic lead silicochromate [11113-70-5] (National Lead Co. designation Pigment M-50) is a composite in which basic lead chromate, ie, chrome orange, is precipitated onto a lead siUcate—siUca base. It does not have an appreciable chromate solubiUty and depends on lead oxide for its effectiveness. 

Corrosion inhibitors are substances which slow down or prevent corrosion when added to an environment in which a metal usually corrodes. Corrosion inhibitors are usually added to a system in small amounts either continuously or intermittently. The effectiveness of corrosion inhibitors is partiy dependent on the metals or alloys to be protected as well as the severity of the environment. For example, the main factors which must be considered before apphcation of a corrosion inhibitor to an aqueous system are the compatibility of the inhibitor and the metal(s), the salt concentration, the pH, the dissolved oxygen concentration, and the concentration of interfering species such as chlorides or metal cations. In addition, many inhibitors, most notably chromates, are toxic and environmental regulations limit use. Attention is now being given to the development of more environmentally compatible inhibitors (37). 

---