Chlorine with sulfur compounds

Chlorination of sulfur compounds. Conversion of sulfides to carbonyl compounds by way of a-chlorination with S02C12 is quite useful. Thus acetylenic aldehydes can be prepared by a two-step process. In the presence of AgN03 or KNO. sulfuryl chloride transforms sulfides directly into a-chloro sulfoxides. ... 

Toxic or malodorous pollutants can be removed from industrial gas streams by reaction with hydrogen peroxide (174,175). Many Hquid-phase methods have been patented for the removal of NO gases (138,142,174,176—178), sulfur dioxide, reduced sulfur compounds, amines (154,171,172), and phenols (169). Other effluent treatments include the reduction of biological oxygen demand (BOD) and COD, color, odor (142,179,180), and chlorine concentration. 

The aHphatic iodine derivatives are usually prepared by reaction of an alcohol with hydroiodic acid or phosphoms trHodide by reaction of iodine, an alcohol, and red phosphoms addition of iodine monochloride, monobromide, or iodine to an olefin replacement reaction by heating the chlorine or bromine compound with an alkaH iodide ia a suitable solvent and the reaction of triphenyl phosphite with methyl iodide and an alcohol. The aromatic iodine derivatives are prepared by reacting iodine and the aromatic system with oxidising agents such as nitric acid, filming sulfuric acid, or mercuric oxide. 

Catalytic Oxidation. Catalytic oxidation is used only for gaseous streams because combustion reactions take place on the surface of the catalyst which otherwise would be covered by soHd material. Common catalysts are palladium [7440-05-3] and platinum [7440-06-4]. Because of the catalytic boost, operating temperatures and residence times are much lower which reduce operating costs. Catalysts in any treatment system are susceptible to poisoning (masking of or interference with the active sites). Catalysts can be poisoned or deactivated by sulfur, bismuth [7440-69-9] phosphoms [7723-14-0] arsenic, antimony, mercury, lead, zinc, tin [7440-31-5] or halogens (notably chlorine) platinum catalysts can tolerate sulfur compounds, but can be poisoned by chlorine. 

Arsenic trifluoride (arsenic(III) fluoride), AsF, can be prepared by reaction of arsenic trioxide with a mixture of sulfuric acid and calcium fluoride or even better with fluorosulfonic acid. Chlorine reacts with ice-cold arsenic trifluoride to produce a hygroscopic soHd compound, arsenic dichloride trifluoride [14933-43-8] ASCI2F35 consisting of AsQ. and AsF ions (21). Arsenic trifluoride forms a stable adduct, 2AsF2 SSO, with sulfur trioxide and reacts with nitrosyl fluoride to give nitrosonium hexafluoroarsenate(V) [18535-07-4] [NO][AsFg]. 

The performance of many metal-ion catalysts can be enhanced by doping with cesium compounds. This is a result both of the low ionization potential of cesium and its abiUty to stabilize high oxidation states of transition-metal oxo anions (50). Catalyst doping is one of the principal commercial uses of cesium. Cesium is a more powerflil oxidant than potassium, which it can replace. The amount of replacement is often a matter of economic benefit. Cesium-doped catalysts are used for the production of styrene monomer from ethyl benzene at metal oxide contacts or from toluene and methanol as Cs-exchanged zeofltes ethylene oxide ammonoxidation, acrolein (methacrolein) acryflc acid (methacrylic acid) methyl methacrylate monomer methanol phthahc anhydride anthraquinone various olefins chlorinations in low pressure ammonia synthesis and in the conversion of SO2 to SO in sulfuric acid production. 

Chlorination of OCT with chlorine at 90°C in the presence of L-type 2eohtes as catalyst reportedly gives a 56% yield of 2,5-dichlorotoluene (79). Pure 2,5-dichlorotoluene is also available from the Sandmeyer reaction on 2-amino-5-chlorotoluene. 3,4-Dichlorotoluene (l,2-dichloro-4-methylben2ene) is formed in up to 40% yield in the chlorination of PCT cataly2ed by metal sulfides or metal halide—sulfur compound cocatalyst systems (80). 

Strong dehydrating agents such as phosphorous pentoxide or sulfur trioxide convert chlorosulfuric acid to its anhydride, pyrosulfuryl chloride [7791-27-7] S20 Cl2. Analogous trisulfuryl compounds have been identified in mixtures with sulfur trioxide (3,19). When boiled in the presence of mercury salts or other catalysts, chlorosulfuric acid decomposes quantitatively to sulfuryl chloride and sulfuric acid. The reverse reaction has been claimed as a preparative method (20), but it appears to proceed only under special conditions. Noncatalytic decomposition at temperatures at and above the boiling point also generates sulfuryl chloride, chlorine, sulfur dioxide, and other compounds. 

The mass spectrum of the unknown compound showed a molecular ion at m/z 246 with an isotope pattern indicating that one chlorine atom and possibly a sulfur atom are present. The fragment ion at m/z 218 also showed the presence of chlorine and sulfur. The accurate mass measurement showed the molecular formula to be C]3FI7OSCl R + DB = 10. 

Replacement of a hydrogen of benzene by chlorine is termed chlorination. When one or more hydrogens are replaced by an -NO2 (nitro group), it is called nitration. Reaction of benzene with sulfuric acid, a reaction known as sulfonation, leads to a sulfonic acid. Note that in each substitution reaction, a small hydrogen-containing compound is formed. 

Biodegradation. Under aerobic conditions, biodegradation results in the mineralization of an organic compound to carbon dioxide and water and—if the compound contains nitrogen, sulfur, phosphorus, or chlorine—with the release of ammonium (or nitrite), sulfate, phosphate, or chloride. These inorganic products may then enter well-established geochemical cycles. Under anaerobic conditions, methane may be formed in addition to carbon dioxide, and sulfate may be reduced to sulhde. 

Stability Unstable in air. Protect from water or moisture. Store away horn heat or ignition sources and sulfur compounds. Reacts with sulfur and sulfur compounds, producing highly toxic VX or VX-like compounds. It completely dissolves polymethylmethacrylate. It is incompatible with calcium hypochlorite (HTH), many chlorinated hydrocarbons, selenium, selenium compounds, moisture, oxidants, and carbon tetrachloride. 

---