Reduced sulfur compounds

Garlic Sulfur compounds Reduce risk for cancer and heart disease... 

In the reducing atmosphere of the reactor, sulfur compounds form hydrogen sulfide and small amounts of carbonyl sulfide [463-58-1J, COS, in a molar ratio of approximately 24 1. 

Toxic or malodorous pollutants can be removed from industrial gas streams by reaction with hydrogen peroxide (174,175). Many Hquid-phase methods have been patented for the removal of NO gases (138,142,174,176—178), sulfur dioxide, reduced sulfur compounds, amines (154,171,172), and phenols (169). Other effluent treatments include the reduction of biological oxygen demand (BOD) and COD, color, odor (142,179,180), and chlorine concentration. 

Iron Sulfur Compounds. Many molecular compounds (18—20) are known in which iron is tetrahedraHy coordinated by a combination of thiolate and sulfide donors. Of the 10 or more stmcturaHy characterized classes of Fe—S compounds, the four shown in Figure 1 are known to occur in proteins. The mononuclear iron site REPLACE occurs in the one-iron bacterial electron-transfer protein mbredoxin. The [2Fe—2S] (10) and [4Fe—4S] (12) cubane stmctures are found in the 2-, 4-, and 8-iron ferredoxins, which are also electron-transfer proteins. The [3Fe—4S] voided cubane stmcture (11) has been found in some ferredoxins and in the inactive form of aconitase, the enzyme which catalyzes the stereospecific hydration—rehydration of citrate to isocitrate in the Krebs cycle. In addition, enzymes are known that contain either other types of iron sulfur clusters or iron sulfur clusters that include other metals. Examples include nitrogenase, which reduces N2 to NH at a MoFe Sg homocitrate cluster carbon monoxide dehydrogenase, which assembles acetyl-coenzyme A (acetyl-CoA) at a FeNiS site and hydrogenases, which catalyze the reversible reduction of protons to hydrogen gas. 

Sulfur Compounds. Various gas streams are treated by molecular sieves to remove sulfur contaminants. In the desulfurization of wellhead natural gas, the unit is designed to remove sulfur compounds selectively, but not carbon dioxide, which would occur in Hquid scmbbing processes. Molecular sieve treatment offers advantages over Hquid scmbbing processes in reduced equipment size because the acid gas load is smaller in production economics because there is no gas shrinkage (leaving CO2 in the residue gas) and in the fact that the gas is also fliUy dehydrated, alleviating the need for downstream dehydration. 

Isopropyl Alcohol. Propylene may be easily hydrolyzed to isopropyl alcohol. Eady commercial processes involved the use of sulfuric acid in an indirect process (100). The disadvantage was the need to reconcentrate the sulfuric acid after hydrolysis. Direct catalytic hydration of propylene to 2-propanol followed commercialization of the sulfuric acid process and eliniinated the need for acid reconcentration, thus reducing corrosion problems, energy use, and air pollution by SO2 and organic sulfur compounds. Gas-phase hydration takes place over supported oxides of tungsten at 540 K and 25... 

In kaolin (clay) processing, sulfur dioxide reduces colored impurities, eg, iron compounds. In the bromine industry, sulfur dioxide is used as an antioxidant in spent brine to be reinjected underground. In agriculture, especially in California, sulfur dioxide is used to increase water penetration and the avadabiHty of soil nutrients by virtue of its abiHty to acidulate saline—alkaH soils (327). It is also usefiil for cleaning ferric and manganese oxide deposits from tile drains (328). 

Catalytic Oxidation. Catalytic oxidation is used only for gaseous streams because combustion reactions take place on the surface of the catalyst which otherwise would be covered by soHd material. Common catalysts are palladium [7440-05-3] and platinum [7440-06-4]. Because of the catalytic boost, operating temperatures and residence times are much lower which reduce operating costs. Catalysts in any treatment system are susceptible to poisoning (masking of or interference with the active sites). Catalysts can be poisoned or deactivated by sulfur, bismuth [7440-69-9] phosphoms [7723-14-0] arsenic, antimony, mercury, lead, zinc, tin [7440-31-5] or halogens (notably chlorine) platinum catalysts can tolerate sulfur compounds, but can be poisoned by chlorine. 

The reducing agents generally used in bleaching include sulfur dioxide, sulfurous acid, bisulfites, sulfites, hydrosulfites (dithionites), sodium sulfoxylate formaldehyde, and sodium borohydride. These materials are used mainly in pulp and textile bleaching (see Sulfur compounds Boron compounds). 

Hydrogenation at lower temperature and ia the presence of catalysts yields organic sulfur compounds. With a reduced nickel catalyst at 180°C, methanedithiol [6725-64-0] is formed ... 

The catalyst commonly used in this method is 5 wt % palladium supported on barium sulfate inhibited with quinoline—sulfur, thiourea, or thiophene to prevent reduction of the product aldehyde. A procedure is found in the Hterature (57). Suitable solvents are toluene, benzene, and xylene used under reflux conditions. Interestingly, it is now thought that Rosenmund s method (59) originally was successful because of the presence of sulfur compounds in the xylene used, since the need for an inhibitor to reduce catalyst activity was not described until three years later (60). 

Many reactions can be carried out between potassium cyanide and organic compounds with the alkalinity of the KCN acting as a catalyst these reactions are analogous to reactions of sodium cyanide. The reactions of potassium cyanide with sulfur and sulfur compounds are also analogous to those of sodium cyanide. Potassium cyanide is reduced to potassium metal and carbon by heating it out of contact with air in the presence of powdered magnesium. Magnesium is converted to the nitride ... 

In the manufacture of varnish, heat is necessary for formulation and purificahon. The same may be true of operations preparing paints, shellac, inks, and other protective or decorative coahngs. The compounds emitted to the atmosphere are gases, some with extremely low odor thresholds. Acrolein, with an odor threshold of about 4000 /xg/m, and reduced sulfur compounds, with odor thresholds of 2 are bofh possible emissions... 

The most widely used pulping process is the kraft process, as shown in Fig. 6-11, which results in recovery and regeneration of the chemicals. This occurs in the recovery furnace, which operates with both oxidizing and reducing zones. Emissions from such recovery furnaces include particulate matter, very odorous reduced sulfur compounds, and oxides of sulfur. If extensive and expensive control is not exercised over the kraft pulp process, the odors and aerosol emissions will affect a wide area. Odor complaints have been reported over 100 km away from these plants. A properly controlled and operated kraft plant will handle huge amounts of material and produce millions of kilograms of finished products per day, with little or no complaint regarding odor or particulate emissions. 

Among the measures which have successfully prevented metal dusting are the use of additives (steam, and compounds of S, As, Sb, and P) in the feed, reduction of pressure, reduction of temperature, and material change. The most common additives are sulfur compounds and steam. Susceptibility can be reduced by using a material in which the total percent of Cr plus two times the percent of Si is in excess of 22 percent. In some environments, a. small amount of a sulfur compound will stop the dusting. When sulfur compounds cannot be tolerated in the process stream, a combination of steam and an alloy with a Cr equivalent of over 22 percent may be most desirable. 

---